User's Manual
Table Of Contents
- 1 Getting to Know Your Phone
- Packing list
- 2 Getting Started
- 3 Basic Functions
- Switching On/Off
- In the power off status, long press the Power Key to switch on the phone.
- In the power on status, long press the Power Key to switch off the phone.
- Making phone call
- Making phone call using the keypad
- Making phone call using contacts
- Making phone call using last dialled number
- Making phone call using speed dial
- Making a conference call
- 1. Make a call to the first participant.
- 2. Enter the phone number of the second participant; or retrieve a number from your Contacts, press
and find out the number you want to call. - 3. Press the Send Key, The first participant is put on hold.
- 4. When the second participant picks up, press the Send Key to connect the calls.
- 5. To end the conference call, press the End Key.
- Answering the call
- Operations during a call
- Keypad lock
- Switching On/Off
- 4 Text Entry
- 5 Contacts
- Add new
- 1. In the standby mode, press
- 2. Change the settings and enter information about the contact (saved in Phone).
- List
- Search
- Groups
- Copy
- Speed dial
- Delete
- Storage location
- Memory status
- My number
- Add new
- Messages
- Text message (SMS)
- Text message menus
- Write and send SMS messages
- Text message options
- Templates
- Delete messages
- Message setting
- In the standby mode, press
- Storage location: Allow you to select a storage location for a message.
- Priority: Message sending priority levels are classified as: Normal, Urgent and
- Delivery report: Set the network to inform you when your messages have been
- Deferred delivery: There are four choices of deferred delivery: Immediate, After 1 hour, After 5 hours and After 1 day.
- Validity period: The SMS valid period is that when the contact’s phone is power off,
- the inbox is full and so on situation that it can’t receive the SMS, the SMS center will store the SMS sent time, if longer than the valid period, the SMS would be deleted and no longer sent to the contact again. The SMS valid period has the following options: Default, 30 minutes, 1 hour, 2 hours, 12 hours, 1 day, 2 days or 3 days.
- Auto save: The sent or unsent message will be automatically saved in the outbox.
- Auto delete: Auto deletes the message when message box full.
- SMS on call reject: If you select Enable, when receive an incoming call, press
, phone will send a reject message which user edited before.
- Storage location: Allow you to select a storage location for a message.
- In the standby mode, press
- Memory status
- Voice mail
- Text message (SMS)
- 7 Call history
- 8 Settings
- Display
- Banner
- Phone setting
- Call setting
- Firewall
- Call
- Blacklist
- 1. In the standby mode, press
- 2. Scroll to any empty entry, and press
. - 3. Enter the number, and press
; or select Search to retrieve a number from your contacts. - Whitelist
- 1. In the standby mode, press
- 2. Scroll to any empty entry, and press
. - 3. Enter the number, and press
; or select Search to retrieve a number from your contacts.
- Private
- SMS
- 1. Scroll to any empty entry, and press
. - 2. Enter the number, and press
; or select Search to retrieve a number from your contacts. - View: View the number.
- Edit: Edit the number.
- Delete: Delete the entry.
- Delete All: Delete all entries.
- Reject Spam number: If activated reject garbage number feature, the mobile phone will compare the short message number with the "Spam number" number one by one, if the number belongs to the garbage list, then the message is regarding as garbage message; if not, it is an normal message.
- Only receive phone message: After activating this feature, the mobile phone will judge if the message came from a normal mobile phone number; if not, this message will be regarded as garbage message; if the message came from a normal phone number, it will be regarded as normal message.
- Off: Deactivate SMS firewall on your phone.
- 1. Scroll to any empty entry, and press
- Call
- Security
- Phone info
- Display
- 9 Profiles
- Activate
- Personalise
- Power on/off: Enable or disable the alert for power on or off.
- Low battery beep: You can choose to switch Enable/Disable.
- Minute beep: Set the phone to beep ten seconds before every minute during a call to keep you informed of the length of your call.
- Call connect beep: Set the phone to beep when an outgoing call connects to the system.
- Call end beep: Set the phone to beep when a call end to the system.
- Service change: Enable or disable the alert for service change.
- Fail on outgoing: Enable or disable the alert for outgoing call failed.
- Charger beep: Set the phone to beep when plug the adapter.
- 10 Fun and Utilities
- 11 Games
- Games
- LinkLong
- Games
- 12 TATA zone
- 13 My data
- SMS services
- 15 Care And Maintain
- 16 Safe Information
- Electronic Device
- Hospital
- Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU).
- Do not use your phone at places for medical treatment where it is prohibited to use mobile phones.
- When you use your phone near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not influence the person.
- Storage Environment
- Children Safety
- Operating Environment
- Care and Maintenance
- Keep your phone and all its parts and accessories out of the reach of small children and pets. They may accidentally damage these things or choke on small parts.
- Keep the phone dry. Precipitation, humidity, and liquids contain minerals that corrode electronic circuits.
- Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.
- Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.
- Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
- Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone’s electronic circuit boards.
- Do not drop, knock, or shake the phone. Rough handling can break internal circuit boards.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and water solution.
- Do not paint the phone. Paint can clog the device’s moving parts and prevent proper operation.
- Do not put the phone in or on heating devices, such as a microwave oven, stove, or radiator. The phone may explode when overheated.
- When the phone or battery gets wet, the label indicating water damage inside the phone changes colour. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired.
- Keep your phone and all its parts and accessories out of the reach of small children and pets. They may accidentally damage these things or choke on small parts.
- Emergency Call
- Battery
- Never use a charger or battery that is damaged in any way.
- Use the battery only for its intended purpose.
- Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery.
- If left unused, a fully charged battery will discharge itself over time.
- Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.
- Do not leave the battery in hot or cold places because the capacity and lifetime of the battery will be reduced. Try to keep the battery at room temperature. A phone with a hot or cold battery may not work temporarily, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0°C (32°F).
- Use only approved batteries and chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its lift.
- Never use a charger or battery that is damaged in any way.
Name Description
Headset hole Before using headset, pull in the headset to this hole.
Notice:
Long press means pressing key time more than or equal 2 seconds; short press means
pressing key time less than 2 seconds.
Icon bar
Icon Description
Indicating signal strength.
Indicating in call status.
Indicating without network.
You have one or several missed call.
Indicating the mobile phone is under data service mode currently, such as brew
download, PC data service.
Indicating the mobile phone is protecting your voice content during a call.
5