User's Manual

Hangzhou Toneway Technology Co. Ltd. CG210 User Guide
38
3.5.2 Alarm clock
The alarm clock is based on the phone clock. It sounds an alert any time you
want. This function supports three alarm clocks and a quick speed alarm clock.
Do the operation below to set the alarm clock.
1. enter the alarm clock interface.
2. Select alarm off or alarm on through pressing left/right navigation key.
3. Press up/down navigation key to move the cursor, then press
corresponding number key to enter the time in the place of twinkling cursor,
or press left/right navigation to select the time .
4. Press key to enter next step.
5. Press left/right navigation key to select the option and press up/down
navigation key to finish selecting the time and the ringtone .
6. Press key to save the alarm clock.
3.5.2.1 Quick alarm
The quick alarm clock can set different alarm times “After 10min”,“After 30min”,
“After 1h”, “After 3h”, “Off”. The alarm can’t be used when the mobile is power
off.
3.5.2.2 Snooze mode
Off
It can be set to turn off the alarm completely by pressing any key when the
alarm wakes up.
10 minutes/15 minutes/20 Minutes
When the alarm goes off, select Snooze to postpone the alarm for 10/15/20
minutes.
3.5.3 Calculator
The calculator function performs the 4 arithmetic calculations using up to 12
digits, addition (+), subtraction (-), multiplication (×), and division (÷).
1. Press
key to display the calculator main interface.
2. Key operations for calculation are as follows:
Enter the first number. Press number key to input the number, press
key to input the decimal point and the key for a negative sign. Then
press key, select the corresponding operator or select the operator