User's Manual

Hangzhou Toneway Technology Co. Ltd. CG210 User Guide
43
3. 6.4 Security
Security menu protects your phone from unauthorized use. Before accessing
this option, you will be asked to enter lock code (The default is 0000).
3. 6.4.1 Lock mode
This option is used to set the lock code.
The lock code can be set to protect your phone from unauthorized use. It can
be set to automatically lock your phone each time it is switched on or is in idle
mode.
The lock code is a four digit number which is set at 0000. This can be changed
at any time by using the ‘change lock code’ option.
Off
This option can be used to set the lock code disable.
Now
This option can be used to immediately lock your phone. Once selected, your
phone will be unusable until the phone lock code is entered.
On power up
This option can be used to automatically lock your phone each time it is
switched on.
3. 6.4.2 Change lock code
This option is used to change the lock code.
After selecting this option, you will be asked to enter new lock code to replace
the old code. The new lock code must be entered again as confirmation.
3. 6.4.3 Reset
Allow you to restore your phone to the factory settings.
3. 6.4.4 PIN Management
This option is used to set and change the PIN code.
The PIN code can be set to protect your UIM card from unauthorized use. If set
to Enable PIN, access to your UIM card will be restricted each time the phone
is powered on.
Enable PIN
If user enables the PIN, the Phone will ask for PIN each time it is switched on.
By default the RUIM PIN is 1234. If you enter wrong PIN code three times ,it
will prompt that you need enter PUK code to unlock PIN code. These
operations is also adapt to disable PIN code.
Disable PIN
This option can be used to set the PIN disable.
Change PIN
This option is used to change the UIM card PIN code.