Copyright©2008 Haier Technologies Co.., Ltd All Rights Reserved Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission as Haier Technologies Co.., Ltd. Safety Precautions Please read these simple guidelines. Not following them may be dangerous or illegal. For further information, see the section of “Warnings and Precautions”.
Follow any restrictions. Wireless devices can cause interference in aircraft. Keep the phone and all its parts, including accessories, out of the reach of small children. Use only approved batteries and chargers. Disconnect the charger from the power source when it is not in use. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its lift. Only qualified personnel should service the phone or install the phone in a vehicle.
13 MyFlexi ...................................................................................................................... 23 Contents 1 Getting to Know Your Phone ...................................................................................... 1 2 Getting Started .............................................................................................................. 4 3 Basic Functions ......................................................................................................
1 Getting to Know Your Phone Icon Indicating the mobile phone is under roaming service mode. Basic specification z z z Description Indicating the keypad is locked. Size: 98.7mm ×41.6mm ×13.4mm Standby Time: about 115 hours Talking Time: about 3 hours Indicating the phone is locked. One or several new text messages. Notice: Standby time is the handset continuous working time without making phone calls.
Icon Description 2 Getting Started You have set the first vibrate after ring Install and charge the phone You have set the first ring after vibrate 1. Remove the battery cover You have set the ring mode. 2. Insert the RUIM card You have set the mute mode. Indicating battery power level. 3. Install the battery 3 4 4.
select Search to search out the contact you want to call. 3. Press the Send Key to make the phone call. 3 Basic Functions Switching On/Off z z Making phone call using last dialed number In the power off status, long press the Power Key to switch on the phone. In the power on status, long press the Power Key to switch off the phone. 1. In the standby mode, press the Send Key to display the last 30 numbers dialed. 2. Select the number or name you want to redial, and press the Send Key.
Notice: The conference call services according to local network provider. Please confirm and contact network provider firstly. Operations during a call During a call press and one of the following options: Messages, Contacts, Mute on (off), Phone info. Keypad lock Answering the call To prevent the keys from being accidentally pressed, you can lock the keypad. When the keypad is locked, only emergency numbers can be dialed. Press and hold [*] key for more than 2 seconds to unlock the keypad.
Predictive Multi-tap Numeric T9EN Upper case T9en Lower case Change the input method T9En Word case text, only available at the beginning of a word. z T9IN Upper case z T9in Lower case z T9In Word case text, only available at the beginning of a word. Abc Word/sentence case text, only available at the beginning of a word/sentence. Notice: Press [1] to insert common symbol under the Predictive mode or Multi-tap mode.
(Number in phone) Add detail, Edit name, Add to group, Erase contact. (Number in card) Edit name, Erase contact. While you edit number, press and one of the following options: (Number in phone) Number type, Edit, Erase, Save to RUIM, Add to speed dial, Send message. (Number in card) Edit, Add to speed dial, Save to phone, Send message. Multicopy 1. In the standby mode, press
Erase all 6 Messages After you input correct phone security code to enter this menu. 1. In the standby mode, press
Templates Forward, Save number, Erase, Copy to Phone/RUIM, Move to Spam. 1. In the standby mode, press
Calculator 7 Call history Call history stores information about the last 10 missed, 10 received, or 10 dialed calls. It also adds the total duration of all calls. When the number of calls exceeds the maximum, the most last call replaces the oldest. 8 Tools Use this menu to perform basic arithmetic functions, such as addition, subtraction, multiplication, and division. Tip calculator Use this menu to calculator tip you need to pay.
Language：You can select language as per you want it. 9 Settings The settings menu provides you with various setting options to customize the phone to your preferences and needs. You can also reset the settings to their default status. Backlight duration：You can control the time-out of the backlight on your phone. Contrast：You can adjust the contrast of the display for varying lighting conditions. Clock time：You can set the clock time which shows in the standby mode.
Change code：By default, the preset lock code is 0000. Emergency numbers: You can use your phone for emergency calls. However, connections in call conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. There are three emergency numbers you can set. Reset to default Reset setting: Use this menu to reset the phone’s settings you have changed. Reset phone: Use this menu to clear all data (include Call History, Contacts (Phone)) that you have stored.
Firewall 12 BREW Call firewall: Use this menu to block or allow some numbers for incoming calls. SMS firewall: Use this menu to block some numbers for incoming messages. Private firewall: Use this menu to protect your content of messages, contacts, and call history for accessing by other person. To access the menu, you must enter the preset lock code. By default, the preset lock code is 0000. This service provided by local network provider. Please confirm and contact with nerwork provider firstly.
15 Care And Maintain If your mobile phone had abnormal conditions, please check it with the following table. If the problem still remains, please ask mobile phone sales for help. Common problems Check item Common problems Check item Weak talk quality Please check if the phone signal is strong enough; If you are in the building, please move the phone or move near the window. Can not charge Please check if the charger is properly connect to the phone and the power source jack.
16 Safe Information Electronic Device Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your Mobile Phone. Consult the manufacturer to discuss alternatives. Hospital Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). z Do not use your phone at places for medical treatment where it is prohibited to use mobile phones.
guide for detailed safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Care and Maintenance z Keep your phone and all its parts and accessories out of the reach of small children and pets.
RF Exposure Information standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. z Battery charging time depends on the remaining battery charge, the type of battery, and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time is noticeably shorter than normal, it is time to buy a new battery.
