User Guide

Note:
(1)when the unit is operating
health or sterilize function," "
displayed on the display board
and " " is displayed on the
di splay board in the fresh
function.
Operation
10
2.Health anion function
Air conditioner starts health anion function operation.
For twice press, disappears,the operation stops.
3.UV light degerming function
Press STERILIZE button ," "and " "displayed on the remote
controller and the air conditioning starts the UV light degerming
function.
" ": For timing operation of UV light degerming function and
automatically canceled after 30 minutes' operation.
" ": For the long-time running of UV light degerming function.
No display: For UV light degerming function not starting.
4.Change-for-fresh-air function
Press FRESH button , " "displayed on the remote
controller and the change-for-fresh-air function operation begins.
For twice press , the display " "disappears and the
change-for-fresh-air function operation is canceled
BRIEF INTRODUCTION TO HEALTH ANION FUCTION
UV light emitted by the UV light device of the indoor unit catalytically
activates the nano TiO2 on the multi-lights touching intermediary,
and the degerming effect is highly efficient and lasting.
Note: when the function is running, don't open the inlet grille.
About UV light degerming function
1.After the change-for-fresh-air function is initiated, the outside air can
enter the indoors through the change-for-fresh-air tube thereby
keeping the indoor air fresh.
About change-for-fresh-air function
Health function includes health anion function, UV light
degerming function and change-for-fresh-air function.
The anion generator in the air conditioner can generate a lot of
anion effectively balance the quantity of position and anion in the
air and also to kill bacteria and speed up the dust sediment in
the room and finally clean the air in the room.
When the fan in the indoor unit does not work, the health lamp
lights up, but the anion generator does not release anion.
When indoor fan motor is running, it has healthy
process function. (It's available under any mode)
Press ON/OFF on the remote controller, unit starts.
Press HEALTH button. For each press, is displayed.
1.Unit start
2.Setting the change-for-fresh-air function under the shutdown status:
Under shutdown status, press the new wind key and the remote
controller displays the on status of air flow, low wind, and change-
for-fresh-air functions, and now can set the timing open, timing
close and time control switch. Press on-off button to cancel the
change-for-fresh-air function.
HEALTH operation
(2) The buttons and the functions of
FRESH and STERILIZE are only for
the units of HSU-09HV03/R2(SBD)
and HSU-12HV03/R2(SBD).
(3) The buttons and the functions of
Power/Soft are only for the units of
HSU-07$09$12$18HV03/R2(BD).
(4) When using the HEALTH/STERILIZE
function, the backlight is green;
When using the FRESH function,
the backlight is yellowish green;
If using the HEALTH/STERILIZE and
FRESH functions at the same time,
the color is the last one.
Remote controller
FRESH
STERILIZE