HLH15BB/15HL25S/HLE20BB/20AL25S/HLH19BB/HLH19W LCD TV USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
Warning WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Safety Instructions b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e.
To users: Thank you for purchasing our LCD-TV. Before connecting the LCD-TV and turning on the power, please read this book carefully. Please keep this book for later use. If the unit is disabled by an electrostatic discharge, please turn off the power to the unit and turn it back on to reset. CONTENT Front Panel Controls..................................................................................2 Connection Options...................................................................................
Front Panel Controls HLE20BB 2 7 3 4 5 1 6 HLH15BB 2 3 4 1 7 65 1 2 TV/AV MENU 15HL25S/20AL25S 6 3 VOL- 4 VOL+ HLH19BB 7 7 6 CH- 5 CH+ POWER HLH19W 6 7 Control Panel Function Selects the input signals: PC/COMPONENT/AV/SV/TV 1.TV/AV 2. MENU Press to select the main menu 3. VOL-(V-) Volume down / Left orientation to adjust the item in the OSD VOL+ (V+) Volume up / Right orientation to adjust the item/Press to enter 4.
Connection Options HLH15BB/15HL25S/HLE20BB/20AL25S (The figure is just for reference, please see actual unit. ) AV /S-VIDEO/COMPONENT Audio Input Connect audio output from an external Antenna Input device to these jacks Connect cable or DC Power Cord Socket This TV operates on DC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on ac power Y Pb antenna signals to the TV, either directly or through your cable box.
Connection Options HLH19BB/HLH19W ANT IN PC AUDIO IN AUDIO IN R L V VIDEO IN S-VIDEO Pr Pb COMPONENT IN Y VGA IN The figure is just for reference, please see the real.
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV MUTE 1 3 5 2 RECALL DISPLAY EXIT 1 2 3 4 5 6 7 8 MTS/SAP 7 9 TV/AV CH+ VOL - CH- 12 13 15 CCD SLEEP 6 9 P.STD 0 MENU 4 8 10 11 VOL + SCAN 14 Illustration of the keys on the remote control: 1. MUTE MUTE 2. Power supply switch 3. RECALL Quick TV channel switch(return to the last channel) 4. EXIT Menu exit 5. DISPLAY Display current input signal information 6.
Remote Control Installing Batteries + - 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two AAA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote control away from heat sources or humid areas to ensure effective performance of the remote.
Connection Instructions The connection instructions shown here are for model HLH15BB for reference only. May differ with the other models mentioned. Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD D-SUB IN -TV and the PC are off; 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC.
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1.
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel on cable box. 3.
Basic Operating Instructions Turn on the LCD-TV MUTE RECALL DISPLAY EXIT 1 2 3 4 5 7 8 MTS/SAP 6 9 When the POWER button is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red. P.STD 0 MENU TV/AV CH+ VOL - CCD CH- SLEEP VOL + Note: The display of the input mode will disappear in 3 seconds.
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 181 channels , and you can press the keys on the remote control or on the panel to make a selection. Picture Mode Press P.STD button on the remote control for menu display . For desired mode as follows: PERSONAL STANDARD MILD FRESH Program Scan Press SCAN button to scan through all the memorized TV channels.
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to illustrate the TV operation. Press TV/AV to select the input source, and the menu for each source is different . 1. Press MENU button to display the main menu, and VOL+/VOL-to select the main menu . 2. Press CH+/CH- to scroll through the parameters 3. Press VOL+/VOL- buttons to make changes to the parameters 4.
Menu Operations Picture Menu Options continued 2. Press CH+/CH- button to enter the picture menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture .
Menu Operations Sound Menu Options continued You can adjust sound options to the levels you prefer. 2. Press CH+/CH- button to enter the audio menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right .
Menu Operations Function Menu Options Menu Language Selection : The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU button and VOL+/VOL- until the following menu appears on the screen. FUNCTION INPUT SOURCE LANGUAGE CC MODE BLUE SCREEN RESET TV ENGLISH OFF ON 2. Press CH+/CH- button to enter the function menu and to go up and down to select the desired option . 3.
Menu Operations Function Menu Options Continued Note: Select CC1 for full translation of the primary language such as English in your area. Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. 4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set On, the screen will be in blue screen after 3 seconds if there is no signal. 5. RESET : Press VOL+ to reset some settings to the factory default . Adjust Menu Options 1.
Menu Operations Tuning Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen TUNING CHANNEL SKIP AFC FINE TUNE ANTENNA AUTO PROGRAM 1 OFF ON CATV Note: This menu is only appears in TV mode . 2. Press CH+/CH- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4.
Menu Operations Tuning Menu Options Continued 4. FINE TUNE : If the image and / or sound received is not very good , you can press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOLbutton to adjust and improve the image quality. Do not use this feature unless reception is poor. 5. ANTENNA : Press VOL+/VOL- button to select AIR (VHF and UHF) and CATV reception preference. 6. AUTO PROGRAM : Auto search and save the channel .Press the VOL+ button to start automatic search function operation.
Menu Operations Parental Menu Options Continued This function enables you to block certain TV channels in accordance to the requirements established by the FCC. 2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to go into PG RATING and MPAA Press VOL+/VOL- button to set the CHILD LOCK ON and PARENTAL LOCK OFF. 4. Repeat step 2 and step 3 until desired quality has been achieved .
Menu Operations Parental Menu Options Continued PARENTAL LOCK TECHNOLOGY: The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV PROGRAMS Guide ratings to block certain types of TV programs and movies. To clearly understand TV program rating codes, read the following information: U.S. TV Program Ratings NR: Not Rated-this means that programs are not rated or rating does not apply.
Menu Operations Parental Menu Options Continued To understand clearly about movie rating codes, read the following list: U.S. Movie Rating Chart NR: This means movie is not rated yet. It is pending government rating approval. G: General Audience-this type of movie rating means all ages admitted to see the movie. PG-13:Parents Strongly Cautioned - this type of movie rating means some material may not be appropriate for children under13.
Troubleshooting Guide To assist in location possible faults use help guide below. Troubleshooting No picture, no sound Verify if the television is properly plugged in. Verify if the television is properly supplied with power. Verify that electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press MUTE button and verify if Mute mode is on.
Specifications Model HLH15BB/15HL25S Picture, sound system HLE20BB/20AL25S NTSC-M Audio output 1.5W+1.
Warranty Warranty 90 days labor and one year parts .
V0.