HTV-021TB 21" FULL MULTI TV OWNER'S MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
Please read this manual carefully before using this TV set and keep it for future reference. CONTENTS Before Operation Warning and cautions...................................................................................2 Important safety instructions.......................................................................3 Installation.....................................................................................................5 Aerial connection....................................................
Warning and cautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit. ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
Important safety instructions 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Important safety instructions (continued) 12. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 13.
Installation Aerial connection To connect the aerial, plug the aerial lead into the aerial socket on the rear of the unit. You can use an outdoor aerial. However, if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programmes. 300 twin-lead cable Antenna adapter Aerial input 75 standard coaxial type 75 coaxial cable Plug AC power socket Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference.
Function Buttons and External Sockets Front and side panel of the TV set S-VIDEO VIDEO S-Video Input terminal Video Input terminal L AUDIO R Power indicator Sensor window MENU AV/TV Volume up/ down (input selector Channel selector Audio Input terminal Power switch Note: Please do not use the S-Video input terminal and the video input terminal together.
Using the Remote Control STANDBY 2 1 PP SLEEP RECALL MUTE 3 4 5 6 1 2 3 4 5 6 7 8 9 0 -/-- 7 AUDIO ST/D/I/II TV/AV 10 8 9 11 P+ 12 V MENU V+ P 14 16 18 20 22 24 26 SOUND 13 15 PICTURE SLEEP TIME TXT MODE/SWAP INDEX X ? 17 19 21 23 25 27 28 29 7 1. Standby Button 2. (No including) 3. PP Button 4.Sleep Button 5.Mute Button 6.Recall Button 7.Numeric Buttons 8.(No including) 9.Multi Digit Button 10.S tereo Button 11.TV/AV Button 12.Volume Button 13.TV Menu Button 14.
Switching on/ off the TV set Preparation Insert the AC cord plug into the proper AC outlet. Note: When not in use, disconnect the plug from the main power supply. Switching on/ off the TV set Switching on/ off the TV set 1 To turn on the TV/AV, press the Power button on the front panel. POWER 1 2 P+ V MENU V+ 2 If the indicator is lighting in red, press the P+/P- button on the panel or on the remote control, the power indicator will become green.
Searching Channels Tuning The unit can tune all the channels automatically. Auto Search Automatic search P+ 1 V 1 Press the TV MENU, until the TUNE menu display. V+ MENU P 2 MENU V+ P P+ V MENU AUTO I OFF 2 TUNE AUTO SEARCH SEARCH BAND FINE TUNE COLOUR SOUND SKIP PROGRAM AUTO I OFF 2 UHF 2 Press the P+/- buttons to select AUTO SEARCH. P+ V TUNE AUTO SEARCH SEARCH BAND FINE TUNE COLOUR SOUND SKIP PROGRAM V+ 3 3 Press V+ button to start auto search.
Searching Channels (continued) Search Search 1 Press the TV MENU, until the TUNE menu display. P+ 1 V MENU V+ P 2 Press the P+/- buttons to select PROGRAM, then press the V-/+ buttons to select the program number you want to store. 2 P+ V MENU V+ P 3 3 Press the P+/- buttons to select SEARCH.
Searching Channels (continued) Manual fine tune Manual fine tune Under poor reception conditions it is sometimes possible to improve the quality of picture and sound using the fine tune. 2 1 P+ V V+ MENU 1Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels. P P+ 2 Press the TV MENU until the TUNE menu appears. 2 V V+ MENU P TUNE AUTO SEARCH SEARCH BAND FINE TUNE COLOUR SOUND SKIP PROGRAM UHF AUTO I OFF 1 3 Press the P+/- buttons to select " FINE TUNE".
Searching Channels (continued) Program Exchange Exchange After auto search there may be some Program numbers duplicated and some blank. To re-order the channels: P+ 1 Press the TV MENU until the PROG.EXCHANGE menu appears. 1 V MENU V+ P 2 2 Press P+/- buttons to select PROG.I, then press the V+/buttons to set desired program. P+ V MENU V+ PROG.EXCHANGE PROG.I 2 PROG.II 0 EXCHANGE P 4 3 P+ V MENU 3 Press P+/- buttons to select PROG.II, then press the V-/+ buttons to set desired program.
Searching Channels (continued) Program skip Program skip After presetting, you can skip needless channels so that you could choose the desired channels. 1 1 Press the P+/- buttons to select the desired program to be skipped. P+ V V+ MENU P 2 Press the TV MENU until the TUNE menu appears. P+ 2 V V+ MENU P 3 Press the P+/- buttons to select "SKIP". 3 P+ V 4 MENU P V+ 4 Press the V-/+ buttons to turn the SKIP function "ON".
Watching TV You can watch TV program in a preset channel. Watching TV program 1 2 3 4 5 6 7 8 9 0 Select the desired program 1 Using "Program number" buttons Directly enter the program number with the numeric keypad on the remote control. To select program numbers between 10 and 99 press [-/-] button and enter the two digit channel number. To select program numbers between 100 and 249 press [-/--] button twice and enter the 3 digit channel number.
Watching TV (continued) Program Swap Program swap Swap function enables quick swap to the last watched program. 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). 18 8 TXT MODE/SWAP 2 If you want to return to the last watched program channel 8, you can simply press the TXT MODE / SWAP button. 3 If you want to return to channel 18, press the button again.
Convenient picture control functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from three factory preset modes and one customized mode. PP Press the PP button to select the desired picture quality. Four kinds of picture modes (i.e., "STANDARD", "DYNAMIC", "PP","MILD" can be selected in turn. Once selection confirmed, the picture will change instantly.
Set up function TV Set Up Language 1 Press TV MENU until SETUP menu appears. 2 P+ 1 3 V V+ MENU P 2. Press P+/- buttons to select LANG. SETUP LANG. BLUE BACK GAME CALENDAR ENGLISH ON SETUP LANG. BLUE BACK GAME CALENDAR ENGLISH ON 3. Press V-/+ buttons to select your desired OSD language. Blue Back When there is no broadcasting signal, the screen will be in blue colour when this function is on. 2 P+ 3 1V MENU 1. Press TV MENU until SETUP menu appears. V+ 2.
Set up function (continued) TV Set Up Calendar function 2 1 V P+ 3 MENU P V+ 1 Press TV MENU until SETUP menu appears. 2. Press P+/- buttons to select calendar. CALENDAR Y: 2004 M: 6 D: 20 S 4 3 Press the P+/- buttons to turn the YEAR/MONTH/DAY, press the V-/+ buttons to set or adjust the YEAR/MONTH/DAY.
TELETEXT SOME BROADCAST MAY PROVIDE TELETEXT SERVICE. USE THE TELETEXT FUNCTION TO ENTER THE TELETEXT MODE. TELETEXT TELETEXT FUNCTION PRESS THE TELETEXT ON/OFF BUTTON TO ENTER THE TELETEXT MODE. PRESS TELETEXT ON/OFF BUTTON TO EXIT TELETEXT MODE. TXT MODE/SWAP TXT MODE /SWAP PRESS THE TXT MODE /SWAP BUTTON TO CHANGE THE VIDEOTEXT BETWEENTOP MODE AND LOF MODE. INDEX PRESS THE INDEX BUTTON TO GO TO THE INDEX PAGE OF TELETEXT. CANCEL PRESS ' ' BUTTON ALLOW YOU TO GO BACK TO THE TV MODE TEMPORARY.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can connect a stereo to the AUDIO output terminals on the TV set to enjoy higher quality sound. VIDEO and AUDIO output terminals output the video and audio signals being monitored by the TV set. The electric levels of video and audio output signals are fixed.
Troubleshooting guide To assist in locating possible faults, use help guide below. BREAKDOWN OF PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Double or Triple Image Noisy Normal This is called ghosting which can be minimized with an outside aerial, good quality cable and terminals. Altering the aerial direction can also minimize this effect.
Specifications HTV-021TB Model Colour system PAL, NTSC, SECAM Sound system BG, DK, I ,M Picture tube 21"colour picture tube(the viewable dimesion is 51cm) Sound output power 2W Power requirements 100-240V 50/60Hz Power consumption Dimension Accessories not distortional 70W 603 Width x475 Depth x430 Remote Control Owner's Manual Battery(AAA) 75 ohm Adaptor Plug Adaptor x1 x1 x2 x1 x1 22 Height mm
Warranty HTV-021TB 23
02 0090506287
