COLOR TV RECEIVER OWNER'S MANUAL Please READ this manual carefully before operating the unit, and keep it for future reference.
*Please read this manual carefully before using your television and keep this manual in a good place for future reference. CONTENTS Before Operation Warning and cautions............................................................................2 Installation...............................................................................................3 Aerial connection...................................................................................3 Preparation of the remote control unit...............
Warning and cautions 1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations. 2. In order to prolong the using life of the TV set, please place it in a well ventilated location. 5.
Installation Aerial connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.
Function buttons and external sockets Front and side panel of the TV set Side-set terminals Video1 input terminal Left sound track Right sound track MENU Volume up/ down Channel selector TV/Video (input selector Power switch Infrared sensor window Power indicator Rear panel of the TV set Antenna input S-VIDEO Video output terminals: VIDEO AUDIO L, R Video 2 input terminals: VIDEO AUDIO DVD input terminals: Y, Cb, Cr L, R S-VIDEO input terminal AUDIO L, R If you want to connect the TV set to the ot
Buttons on the remote control Buttons and Descriptions MUTE POWER Mute Button SWAP CALL TV/AV Press to conceal the sound of programs. -/-- Stand by Button Screen Display Button 1 2 3 4 5 6 7 8 9 Swap function Button TV and AV Exchange Button To exchanger between TV and other available video inputs TIME SCAN Program number Button 0 P.
Switching on/ off the TV set In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light. 2 If the indicator is lighting in red, press the POWER button on the remote control again.
Watching TV You can watch TV program in a preset channel. Watching TV program How to select TV program 1 2 3 4 5 6 7 8 9 0 Select the desired program 1 Using "Program number" buttons Directly enter the channel number with the numeric keypad on the remote control.
Watching TV continued Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory with "OFF" skip status (each channel will last about 2 seconds). Program swap and auto scan functions Program swap 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi- automatic and manual fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode TUNE 1 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen.
Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I.E. channel 1 1 AUTO BG TUNE 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 Press the CH+/- buttons to CH+ VOL - MENU select " SEARCH". VOL + CH- 4 Press the VOL-/+ buttons to start searching.
Searching channel Continued Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. CH+ VOL - MENU VOL + 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels I.E. channel 1 1 AUTO DK CH- 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. TUNE 3 Press the CH+/- buttons to select " FINE TUNE".
Searching channel Continued Program skip Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control. CH+ VOL - MENU VOL + 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels I.E.
Convenient picture and sound control functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. P.STD Press the P.STD button to select the STANDARD desired picture quality. Five kinds of picture modes (i.e., "STANDARD", RICH "RICH", "USER","LISTEN", USER "SOFT" ) can be selected in turn.
Convenient picture and sound control functions Continued Black Stretch-(Automatically Increases the Contrast Rage) Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.) Black stretch and noise reduce How to select BLACK STRETCH PICTURE 1 Press the PICTURE menu button , till the PICTURE menu shown on the right display on the screen.
Convenient picture and sound control functions Continued Mute function Sound mute MUTE 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press the VOL-/+ buttons.
Time functions Clock setting and timer on/off functions Clock setting VOL - TIME The clock will only work if the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. CH+ 1 Press the TIME menu button, and the TIME menu display on the screen.
Time functions Continued Sleep timer and program preset Sleep timer The TV set have 18 sections option for sleep timer function (each section has a time interval of 10 minutes) (See right chart): TIME 0 10 20 170 1 Press the TIME menu button, and the TIME menu display on the screen. CH+ VOL - MENU VOL + 2 Press the CH +/- buttons to select "SLEEP TIMER". 3 Press the VOL -/+ buttons to adjust the SLEEP TIMER level.
Set up function Screen saver and childlock functions How to start screen saver function When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving . 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. FUNCTION 2 Press the CH+/- buttons to CH+ VOL - MENU select "BACKGROUND" and press VOL + CH- the VOL-/+ buttons to turn the BACKGROUND function "ON" .
Set up function Continued AVL and calendar functions AVL function 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. FUNCTION CH+ VOL - MENU VOL + FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR ON ON ON OFF ON 2 Press the CH+/- button to select "AVL" . CH- 3 Press VOL-/+ button to turn the AVL function "ON" or "OFF".
Set up function Continued Fade and select a language Fade The FADE control allows time for the picture tube to warm up and gently turned on, which can help prolong the life of the picture tube. 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. FUNCTION MENU ON ON ON OFF ON 2 Press the CH +/- buttons to select "FADE .
Position exchange functions Exchange Exchange This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers. CH+ VOL - MENU VOL + CH- 1 Press the MENU button, till the EXCHANGE menu display on the screen. 2 Press the VOL-/+ buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 TO 6.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can connect a stereo to the AUDIO output terminals on the TV set to enjoy sounds of higher quality. VIDEO and AUDIO output terminals output the video and audio signals being monitored by the TV set. The electric levels of video and audio output signals are fixed.
Troubleshooting guide If the TV set has breakdown, please check according to the following list. Checking No power supply No sound Bad colour/ hue Colour spot Scramble If power line is connected? Whether sound mute is used? Whether the adjustments of contrast, colour and hue are suitable? If the position of the TV set is changed during its work, the colour shadow may appear.
Specifications Colour system PAL, SECAM, AV NTSC Sound system DK, BG Display tube 29" CRT Sound output power 5W+5W Power supply ~ 160-250V 50/60 Hz Power consumption 150W Size 773 Supplied accessories Remote control Owner's manual Battery(AAA) width x594 depth x500 height X1 X1 X2 The design and specifications may be changed without notice.