User Manual

GB
6- Use
Red wine +14 °C to +20 °C
Sparkling wine,
Prosecco
+7 °C to +9 °C
Rosé wine +10 °C to +12 °C Champagne +5 °C to +7 °C
White wine +8 °C to +12 °C
14
6.5.4 Recommended temperature settings for wine
The following drinking temperatures are recommended for the dierent types of wine.
6.5.1 Setting the temperature (Fig. 6.5-1)
1. Hold the button for about 3 seconds. The
temperature display for the upper compartment
starts to ash.
2. Press the or button to increase or decrease
the temperature. When the desired temperature
has been reached, press the button.
3. The temperature for the upper compartment has
been set and the temperature for the lower com-
partment starts to ash.
4. Repeat step 2 to set the temperature for the lower
compartment. Instead of pressing the
 button
at the end, it is possible to wait 5 seconds without
touching the display.
5. When display stops ashing, it goes back to show-
ing the current temperature inside the wine cellar.
It will take some time to reach the set temperature.
UPPER LOWER
6.5-1
6.5.3 Low temperature compensation function
The wine cellar has a low temperature compensation function to ensure the stability of
the temperature: When the ambient temperature is lower than the set temperature, the
wine cellar automatically starts the low-temperature compensation function, heating
the application. When the temperature in the application reaches the set temperature,
the low temperature compensation function is automatically turned o.
If you store wine for long periods of time, it should be stored at a temperature between
+10°C and +12 °C.
6.5 Temperature
The temperature of the wine cellar is preset to 12 °C. It can be changed to any tempera-
ture between 5 °C and 20 °C for the compartments individually.
Notice: Inuences on temperatures
The temperature inside the appliance is inuenced by the following factors:
▶ Ambient temperature
▶ Frequency of door opening
▶ Amount of stored bottles
▶ Installation of the appliance
6.5.2 Switching between Celsius and Fahrenheit
To change the displayed measurement unit, press the button for about 3 seconds.
The displayed temperature will switch from Celsius to Fahrenheit and back.