34F9K COLOUR TV RECEIVER OWNER'S MANUAL Haier & Higher Please read this manual carefully before using this TV set and keep it for future reference.
* For your enjoyment of this TV set, please read this manual carefully and keep it good for future reference. CONTENTS Before Operation Warning and cautions........................................................................2 Installation...........................................................................................3 Antenna connection...........................................................................3 Preparation of the remote control unit...........................................
Warning and cautions 1 When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations. 2 In order to prolong the using life of the TV set, please place it on a ventilated place. 5.
Installation Antenna connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. 300 twin-lead cable Antenna adapter (additional purchase) 75 coaxial cable Note It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. Don't bind antenna cable and power wire together.
Function buttons and external sockets Front and side panel of the TV set TV/Video (input selector Volume up/ down Channel selector MENU S terminal Video1 input terminal Left sound track Right sound track Infrared sensor window Power switch Power indicator Rear panel of the TV set Antenna input Video output terminals: VIDEO AUDIO L, R Video 2 input terminals: VIDEO AUDIO L, R DVD input terminals: Y, Cb, Cr If you want to connect the TV set to the other audio/video equipments, please refer to P23.
Buttons on the remote control Buttons on the remote control MUTE SCAN LOCK CALL ZOOM TV/AV SWAP S.STD P.
Switching on/ off the TV set In the following, the methods of using power switch and the remote control to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . TV/Video MENU (input selector Channel selector Volume up/ down 2 If the indicator is lighting in red, press button on the remote control again.
Watching TV You can watch TV program in a presetting channel. Watching TV program How to select TV program Select the desired program 1 Using "Program number" buttons Directly enter the channel number with the numeric keypad on the remote control.
Watching TV Continued Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory (each channel will last about 2 seconds), so that you are free from the trouble of pressing keys. Program swap and auto scan functions Program swap SWAP 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
Searching channel This TV set has three methods to set channels, which are respectively full automatic, semi- automatic and manual fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic mode TUNE 1 Press the TUNE menu button , till TUNING menu shown on the right display on the screen. 2 Press the CH+/- buttons to CH+ select "AUTO SEARCH".
Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the CH+/- buttons or the PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example TUNE 1 AUTO BG 83.50MHz 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 Press the CH+/- buttons to CH+ select " SEARCH". VOL- MENU VOL+ CH- 4 Press the VOL-/+ buttons to start searching. The VOL- down button is used for lower side program search.
Searching channel Continued Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. CH+ VOL- MENU VOL+ CH- TUNE 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels regard channel 1 as example 1 AUTO BG 83.50MHz 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 Press the CH+/- buttons to select " FINE TUNE".
Searching channel Continued Program skip Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control.
Convenient picture and sound control functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. P.STD STANDARD Press the P.STD button to select the desired picture quality. Five kinds RICH of picture modes (i.e., "STANDARD", USER "RICH", "USER","LISTEN", LISTEN "SOFT" ) can be selected in turn.
Convenient picture and sound control functions Continued Black stretch and noise reduce How to select black stretch FUNCTION 1 Press the FUNCTION menu button , till the FUNCTION menu shown on the right display on the screen. CH+ VOL- MENU OCT FUNCTION BACKGROUND BLACK STRETCH NOISE REDUCE FADE AVL ON OFF ON ON ON 2 Press the CH+/- buttons to VOL+ select "BLACK STRETCH".
Convenient picture and sound control functions Continued Multiple sound modes How to choose sound mode Press the S.STD button to select the S.STD THEATER desired sound quality. Four kinds of sound models (i.e., "THEATER", MUSIC "MUSIC","USER" and "SPEECH") can be selected in turn.
Convenient picture and sound control functions Continued Surround, Woofer and mute functions How to use surround SOUND 2 Press the CH+/- buttons to select "SURROUND", then press the VOL-/+ buttons to turn the SURROUND to ON.. CH+ VOL- MENU 1 Press the SOUND menu button , till the FUNCTION menu shown on the right display on the screen.
Time functions Clock setting and timer on/off functions Clock setting The clock will only work if the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. TIME 1 Press the TIME menu button, and the TIME menu display on the screen.
Time functions Continued Sleep timer and program presetting Sleep timer TIME The TV set have 18 sections option for sleep timer function (each section has a time interval of 10 minutes) (See right chart): 0 10 20 170 1 Press the TIME menu button, and the TIME menu display on the screen. 180 CH+ VOL- MENU VOL+ 2 Press the CH +/- buttons to select "SLEEP TIME". 3 Press the VOL -/+ buttons to adjust the SLEEP TIME level.
Set up functions Screen saver and AVL functions How to start screen saver function When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving ( black background). NO SIGNAL FUNCTION 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. OCT CH+ 2 Press the CH+/- buttons to VOL- MENU VOL+ select "BACKGROUND" and press the VOL-/+ buttons to turn the BACKGROUND function "ON" .
Set up functions Continued Switch on/off modes Switch on/off modes FUNCTION Provides professional picture fades between channel change to reduce the effect of bright light flashes common with channel change 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. OCT FUNCTION BACKGROUND BLACK STRETCH NOISE REDUCE FADE AVL 2 Press the CH+/- buttons to CH+ ON ON ON ON ON OCT select "FADE" .
Position exchange function Exchange Exchange This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers. CH+ VOL- MENU VOL+ CH- 1 Press the MENU button again (7 times), till the EXCHANGE menu display on the screen. 2 Press the VOL-/+ buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 TO 6.
Others functions Calendar, child lock and display functions Calendar function 1 Press the MENU button again (6 times), till the calendar menu display on the screen. CH+ VOL- MENU OCT 2 Press the CH+/- buttons to turn VOL+ the YEAR/MONTH/DAY,press the VOL-/+ buttons to set or adjust CH- the YEAR/MONTH/DAY. Child lock function LOCK When the TV set is on, press the LOCK button on the remote control , then child lock function starts to take effect.
Connecting the TV set to the other video and audio equipments Connecting to the other video and audio equipments You can connect a stereo to the AUDIO output terminals on the TV set to enjoy sounds of higher quality. VIDEO and AUDIO output terminals output the video and audio signals being monitored by the TV set. The electric levels of video and audio output signals are fixed.
Troubleshooting guide To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Double or Triple Image Disturb Noise Normal Noise This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.
Specifications Model 34F9K Colour system AUTO PAL AV NTSC Sound system BG Display tube 34 " pure flat CRT Sound output power 5W+5W & 5W Power supply AC 160V-250V~, 50/60Hz Power consumption <180W Size mm Supplied accessories 848 width Remote control Owner's manual Battery(AA) depth height X1 X1 X2 The design and specifications may be changed without notice.
