PLASMA TV OWNER ' S MANUAL MODEL S :42EP25BAT 42EP25SAT 42HP25BAT 42HP25SAT 50HP25BAT Please READ this manual carefully before operating your TV, and retain it for future reference.
WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product.
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed. 3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e.If the unit has been dropped or damaged in any way. f.
Introduction Contents War nin g . . . . . . . ... ... ... ... .. . . . . . . . . . . . . . . . . . . . . . . . Saf ety I nst ruc tio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. Introduction Con tro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... ... ... ... .. Connection Options . . . . . . . . . . . . . . . . . . . . . ............. Universal Remote Controller . ............ . . . . . . . . ...... Installation Acc ess ori es . . . . . . . . . . . . . . . . . . .
Introduction Controls -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front panel controls 42EP25BAT 42HP25BAT 42EP25SAT 42HP25SAT EXIT EXIT INPUT CH- CH+ VOL- INPUT CH- CH+ VOL- VOL+ 1.EXIT clears all on-screen displays and returns to TV viewing from any menu. 2.INPUT: all input source display and OK confirm. 3 .CH(+/-) Program plus and minus, menu options 4.VOL(+/-) Volume increase and decrease, menu reset and entry 5.
Introduction Connection Options Back panel controls 42EP25BAT 42HP25BAT 42EP25SAT Digital Audio Output Connect digital audio from various types of equipment. Note: In standby mode, these ports will not work. Audio input for linking PC audio output terminals. Y PC Pb DVI Audio In PC VIDEO Input Connect the monitor output connector from a PC to the jack DVD/DTV Input (Component ) Connect a component video/audio device to these jacks.
Introduction Universal Remote Controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction TV DVD VCR SETBOX CABLE AUDIO Press the SELECT button repeatedly to select one of the system modes in which the remote control can be used. When the desired device is selected, the corresponding LED lights on 5seconds.
Accessories 42EP25BAT 42HP25BAT 42EP25SAT 42HP25SAT SELECT CH.LIST PIP FAV.LIST SWAP P.MODE AUDIO LIST AUDIO SWAP POSITION PLASMA TV OWNER ' S MANUAL S.MODE CC FREEZE UIDE NPUT INFO ENU OK EXIT EP SLE ARC SAP VOL+ CH+ VOL- CH- Q.VIEW Remote controller Owner`s manual Power cable Alkaline battery(AAA) 2 M4X12 Screws x8 Speaker unit(X2) M5X16 Screws x4 Brace pole x2 Connection cord ( Standx1 50HP25BAT SELECT CH.LIST PIP FAV.LIST SWAP P.
Install the Speakers (42EP25 B AT/42HP25B AT/42EP25SAT/42HP25SAT ) 1 Í â ¹ Ò Ñ ï É ù Æ ÷ Ê ¹ Ó Ã Ë µ Ã ÷ Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. (See figure), lay the two speaker aside of the PDP. 2 3 Insert the pothook to the faucet of the PDP screen . Fix the speaker to the PDP with the screws 4-ST 4X16 . \U+2592\U+255A\U+2514\U+00B2 25.
Install the Stand Insert the supporting bracket with 8 M4x12 screws to the installation holes on the bottom of the soleplate. Fasten the Supporting bracket and the Soleplate as shown in figure. Install the Stand to the PDP Face the PDP screen upside down on a clean blanket or the bracket and pay attention not to indent the casing. Lay down the stand and put it to responding position of the PDP screen ,and make sure the brace pole towards the hole of the PDP .
Installation - The TV can be installed in various ways such as on a wall, or on a desktop etc. - The TV is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Installation External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you.
Installation External Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). L How to use S-Video CVBS R R L V RF S-Video/CVBS Audio In INPUT AV OUT 1. Select the input source with using the INPUT button on the remote control. 2.
Installation External Equipment Connections DTV connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
Installation External Equipment Connections PC connection How to connect 1 . To get the best picture quality, adjust the PC graphics card to (1024 x768). 2 . Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherVGAIN or DVI IN to display the PC on the TV.
Installation External Equipment Connections Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV`s AV OUT. See the Operating Manual of the second TV or monitor for further details regarding that device`s input settings. L R L R V RF INPUT AUDIO OUT AV OUT Notes: YPbPr, VGA, HDMI,DTV input sources cannot be used for Monitor out.
Installation HDMI - HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing." - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolution.
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Owner s Manual 19
Installation External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. L R YPbPr Audio In Headphone out S-VIDEO Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.
Operation Operation -In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. Switching On/Off the TV set 1. First, connect power cord correctly. 2. Select the viewing source by using INPUT button on the remote control. 3. When finished using the TV, press the POWER button on the remote control.
Operation Channel menu This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on. Automatic Scan - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the All Channel List.
Operation Channel menu Manual Scan If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Video 1 Press the MENU button and then use / Audio button to select the Time Channel menu. A 2 Press the 3 Press the button and then use button and then use / / button to select Tuner. B C button to Select Cable or Air Tuner Air Type Auto Scan Manual Scan Channel NO Fine Tune Frequency Channel Edit Program Function Rename Air 4 67.
Operation Channel menu Edit Program You can create your own Favorite List. Use the FAV.LiST butt on on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List.
Operation Select the desired program 1 Using the CH+/- buttons. Press the CH+ button to select a channel number in number increasing direction. Press the CH- button to select a channel number in number decreasing direction. (Note: If Skip is ON on one channel, press CH+/- button, the channel will not appear.) Select the desired sound Press the VOL-/+ or / buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100.
Operation Video menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. How to select picture modes The picture mode provides the pre-defined images settings. There are four settings: standard/ vivid /mild/custom. Press P.MODE button on the remote controller the Video Mode list is out , press P.MODE to select the option (Standard/Vivid/Mild/Custom) Standard: normal mode.
Operation Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. - Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible. 1 2 3 Press the ARC button the Aspect Ratio menu appearance on the screen. Press the / button to select the desired picture format. Press the OK button to confirm.
Operation Audio menu How to Select Audio modes Press S.MODE button on the remote controller the Audio Mode list is out , press S.MODE to select the option (Live/POP/Rock/Custom). Custom A spare setting that can be adjusted to personal tastes. Live Normal sound with moderate bass and treble setting. POP Designed to reduce the bass and treble which enhances the voice for news programs. Rock Enables extra bass and treble to enhance the movie experience.
Operation Audio menu SAP Broadcasts Setup - This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. - When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals. - Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
Operation Time menu Date /Time setting Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. Video Audio 1 2 3 Press the MENU button and then use / button to select the Time menu. Time A Press the button and then use / button to select the Date/Time. Press the button and then use / button to select the Mode: B C Channel Date/Time Mode Manual Timer on Date 2004.12.
Operation Time menu Sleep Timer setting The sleep timer automatically shuts off the TV after a preset time (from 15 to 120 minutes). 1 2 3 Press the MENU button and then use Press the Press the button and then use button and then use / / Audio button to select the Time menu. button to select the SleepTimer. / Video button to select the number of minutes.
Operation Function menu Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Video Using Closed Captions Time Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Operation DTV Caption Style (In DTV mode ) This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV`s digital captioning. - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use / button to select the Function menu. 2. Press the button and then use / button to select DTV Caption Style. 3. Press the button and then use / button to set style as Custom. 4.
Operation Adjust menu Screen Setup for PC mode - When RGB connect to PC input and select the VGA, this function is used. Adjustment for screen Position, Size, Phase, Reset - Display PC Adjust Menu by pressing INPUT button then use / button to select the VGA item. Position : Adjust the screen position. Size : Adjust the screen size. Phase : Adjust the phase of Pixel clock. Mode : there are two modes: Auto Sync and default 1 Press the MENU button and then use / button to select the Adjust menu.
Operation Lock Menu Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Operation Lock setup - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. 1. Press the MENU button and then use Then, press the button. / The TV is set up with the initial password security default password is 9-4-4-3. button to select the LOCK menu. 0-0-0-0 and Video Password Audio Parental Lock Time Input Password: On Confirm Password: MPAA Rating Parental Guide A 2.
Operation Lock setup Parental Guide Parental Guide: Blocks any channels that you do not want to watch or that you do not want your children to watch. Note : The Parental control will automatically block certain categories that are more restrictive . For example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-Y, TV-Y7, TV-G, TV-PG, TV-14, and TV-MA).
Operation EPG (Electronic Program Guide) - This system has an Electronic Program Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as program listings, start and end times for all available services. This function can be used only when the EPG information is broadcasted by broadcasting companies. This function is only supported in DTV signal. 1. Press the GUIDE button to switch on EPG. 2.
Operation Brief Info. - Brief Info shows the present screen information. - Press the INFO button to show the Brief Info on the screen. - Press the INFO button or EXIT button to exit. Function: Show the present screen information. Press the INFO button or EXIT button to exit. A: Program title B: Program rating categories C: Video resolution D: Program name E: Additional information.
Operation Viewing Picture - in- Picture - This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. - The PIP function is be used only in DTV and VIDEO1 modes. - If CC mode is ON, the CC display only in MP window. PIP function Press the PIP button on the remote controller, the screen show PIP PBP and Main Picture window in turns .
Operation Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, VCR, CABLE, DVD, SETBOX or AUDIO . Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
Operation Setting Up Your Remote Control Code Display Mode 1 Press and release SELECT button to desired device. 2 Press and hold OK button, then press SELECT button about 3 seconds till LED is on. Release 2 keys. LED flashes with the speed of twice per second. SELECT CH.LIST PIP FAV.LIST SWAP AUDIO LIST AUDIO SWAP POSITION 3 4 Enter [9][8][0] in turn to enter Code Display Mode . LED is off. Press and release [1] once, LED will flash. The times LED flashes is the first digit of code number.
Operation Remote Control Codes TV NO.
Operation Remote Control Codes TV DVD NO.
Operation Remote Control Codes VCR NO.
Operation Remote Control Codes AUDIO TYPES RECEIVER NO. B ran d Cod e 1 Aiwa Denon Fisher JVC Kenwood Magnavox Marantz Panasonic Philips Pioneer Sanyo Sharp Sherwood Sony Technics Yamaha 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 4 1 2 3 1 1 1 1 2 1 1 2 2 2 2 022 010 011 019 015 021 029 008 017 006 011 028 012 001 007 014 2 3 4 5 6 7 8 9 10 11 12 5 6 7 8 9 10 11 12 023 024 027 028 020 016 025 018 013 002 026 030 TAPE NO.
Operation Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2 .
Specifications 42EP25 B AT/42EP25SAT 42HP25 B AT/42HP25SAT/50HP25 B AT 1024X768(Dot) 1366X768(Dot) 120V~ , 60Hz NTSC Clear QAM 75 ohm External Antenna Impedance 42EP25 B AT 42EP25SAT Dimensen(WXHXD) Unit::inches/mm (Including stand) ATSC 42HP25 B AT 42HP25SAT 50HP25 B AT 41.3X26.2X10.6inches 1050X664X270 mm 41.3X26.2X10.6inches 1050X664X270 mm 58.8X31.1X4.1inches 1495X790X103mm 60.6/27.5 60.6/27.5 97.0/44.
Troubleshooting Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input.
Warranty This Haier brand product, when shipped in its original packaging, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a new or re-manufactured equivalent at no charge to the purchaser, for parts or labor for the periods set forth below: Responsibility of Haier to the purchaser with respect to the product, and shall constitute full satisfaction of all claims, whether based on contract, neglige