Installation guide

INSTALLATION
PAGE 10
ENGLISH
Wiring Unit
5.1
Step - 5.1
Remove the cover plate of the outdoor unit to expose the
terminal block connections.
5.2
Step -5.2
Connect Line Voltage from Circuit Breaker/Disconnect to
outdoor unit wire terminal
Always follow local and national codes when installing
electrical wiring. The required fuse size can be found in the

Connect wiring from indoor units
Use14/4 AWG Stranded wire when connecting the outdoor
unit to the indoor unit. Connect the wiring to the correct
terminals based upon the piping connections. For example,
Circuit A wiring goes to the piping feeding Circuit A. Do not
cross the wiring and piping.
Step 5 - Electrical Connections
5.3
Step - 5.3
Replace the cover plate.
Step 5.1
Step 5.2
Line Voltage
Terminals
Indoor Unit Terminals