- Automatic Drum Washing Machine User Manual

08
BEFORE USE
Inicio
Diferido
Aclarado
Extra
Intensivo
Parada
cuba llena
Velocidad
Temperatura
Prelavado
Algodón
Sintético
Lana
Mixto
Deportivo
Rápido 40’
Express 15’
Aclarado
Centrifugado/
Vaciado
Inicio/Pausa
Inicio
A
B
C
D
E
F
G
H
J
K
I
OPERATIONAL FUNCTIONS
CONTROL PANEL
A Program knob
B Power Switch
C Start/Pause button
D Spinning Speed Setting button
E Washing temperature button
F Delay Button
G Detergent distribution drawer
H Display
I
Intense button
J Extra rinse button
K Rinse hold
A ¬ Program knob _By turning the knob clockwise/counterclockwise, the required program can be selected.
There are 10 programs available. After a program is selected, the corresponding light will
go on.
B ¬ Power Switch _ Press this button to switch on the washing machine. Press it again to switch it off.
Press this button gently for 2 seconds to switch off the machine as buttons are soft touch
sensitive.
C ¬ Start/Pause
Button
_ When the washing machine is connected to the power socket and a program is selected,
lightly touch this button to start operation. During a wash cycle, touch it lightly ,operation
will stop and the digits on the screen start blinking. Touch it again to resume operation. To
cancel a wash program during a wash cycle, touch this button, when the digits on the screen
start blinking, press the Power switch, the program will be cancelled.
D ¬ Spinning Speed
Setting Button
_ Touch this button lightly to select the desired speed. When a speed is set, it will be
displayed on the display screen.
Note: Different water temperatures and spinning speeds can be set for
different laundries. Wash using the default settings if there is no special
requirement.
E ¬ Washing
temperature button
_ Touch this button lightly, the washing temperature will be displayed on the display screen.
Select a temperature according to the type of laundry.