Manual

@
¢@n_r@!Pan÷J
Temp and time setting
Receiving sensor
Mod_ light
Power Control (Eme_ency)
Warning Light
Power ¢ont_J
The power control turns the unit on and off_
When you press power controJ, the unit begins to
operate.
Warning LigB_
Condensed water may accurnuJate in the unit.
if the internal tank becomes fuji, the Warning
Light wiJl shine and the unit wiJJ not operate untiJ
the unit has been drained.
Ope_ing mode indica_r
indicator cdor of operating mode and LED :
When coding mode is seJected, the indicator
light wiJJ be bJueo
When dehumidi_ mode is seJected, indicator
Jight wiJJbe Orange.
When fan mode is sdected, indicator JightwiJJ
be green.
Tempo and Time Setting Jndica_t
During operation, the unit dispJays "present
room temperature."
® When setting temperature, the unit wilJ dispJay
set temperature.
When setting the time it dispJays "set time" and
indicator fJashes.
• 5 seconds after "set temperature" and "set
time", it goes. back to "present room tempera-
@
o
Temperature dispJay ranges from 61°F to 89°E
When environmental temperature is higher
than the temperature dispJay range, the dispJay
shows "HI".
When environmental temperature is Jower than
the. temperature dispJay range, the dispJay
shows "LO".
When the unit stops operating, indicator [ight
goes off.
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
7