COMBINED 21" TV AND DVD PLAYER OWNER'S MANUAL TV + The Owner's Manual for the Follow Models: Please read this manual carefully before using this TV set and keep it for future reference.
CONTENTS Before Operation Warning and cautions............................................................................2 Installation...............................................................................................3 Aerial connection...................................................................................3 Preparation of the remote control unit...................................................3 Function buttons and external sockets................................................
Warning and cautions 1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations. 2. In order to prolong the using life of the TV set, please place it in a well ventilated location. 5.
Installation Aerial connection For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite (or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be transferred.
Function buttons and external sockets Front panel of the TV set VIDEO L-AUDIO-R Video R/LAudio Headphone jack Power Switch Power Indicator TV/DVD MENU Play the DVD V- V+ P- P+ Stop the DVD The DVD Player Menu Signal Receiver TV/DVD Switching Open/close the DVD Channel Position up/down Volume up/ down Rear panel of the TV set TV EXT TV EXT TV SCART Terminal
Buttons on the remote control Buttons on the remote control Stand By POWER CALENDAR TIME OPEN/CLOSE CALL MUTE DVD Open/close (Not available) SCAN SWAP Scan Time Menu Mute 1 2 3 4 5 6 7 8 Former Program Call Screen Display TV/AV 9 0 -/-- Program Number (Not available) TV/AV Exchange TV/DVD P+ Digital Selector TV/DVD Volume/Channel Selection V- MENU V+ MENU Exit Screen Display EXIT P.STD P- DVD STOP SETUP PAUSE/STEP STOP Picture Mode (Not available) REV FWD .
Switching on/ off the TV set In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light. 2 If the indicator is lighting in red, press the button on the remote control again.
Watching TV You can watch TV program in a preset channel. Watching TV program How to select TV program Select the desired program 1 Using "Program number" buttons 1 2 3 4 5 6 7 8 9 0 Directly enter the channel number with the numeric keypad on the remote control.
Watching TV continued Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory with "OFF" skip status (each channel will last about 2 seconds). Program swap and auto scan functions Program swap 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure).
Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi- automatic and manual fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode 1 Press the MENU menu button , till the TUNE menu shown on the right display on the screen.
Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I.E. channel 1 P+ V- MENU V+ 1 AUTO DK 2 Press the TUNE menu button , till the TUNE menu shown on the right display on the screen. P- 3 Press the P+/- buttons to select " SEARCH". P+ V- MENU P- V+ 4 Press the V-/+ buttons to start searching.
Searching channel Continued Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels I.E. channel 1 P+ V- MENU 1 AUTO DK V+ P- 2 Press the MENU menu button , till the TUNE menu shown on the right display on the screen. 3 Press the P+/- buttons to select " FINE TUNE".
Searching channel Continued Program skip Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the P+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control. 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels I.E. channel 1 P+ V- MENU V+ 2 Press the MENU menu button , till the TUNE menu shown on the right display on the screen.
Convenient picture and sound control functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. STANDARD P.STD Press the P.STD button to select the desired picture quality. Five kinds RICH of picture modes (i.e., "STANDARD", USER "RICH", "USER","LISTEN", LISTEN "SOFT" ) can be selected in turn.
Convenient picture and sound control functions Continued Black Stretch-(Automatically Increases the Contrast Rage) Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.) Black stretch and noise reduce How to select BLACK STRETCH 1 Press the MENU menu button , till the PICTURE menu shown on the right display on the screen.
Convenient picture and sound control functions Continued Mute function Sound mute MUTE 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press the V-/+ buttons.
Time functions Clock setting and timer on/off functions Clock setting The clock will only work if the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. TIME 1 Press the TIME menu button, and the TIME menu display on the screen.
Time functions Continued Sleep timer and program preset Sleep timer The TV set have 18 sections option for sleep timer function (each section has a time interval of 10 minutes) (See right chart): TIME 2 Press the P+/- buttons to select "SLEEP TIMER". P+ MENU 20 170 1 Press the TIME menu button, and the TIME menu display on the screen. V- 0 10 V+ 3 Press the V-/+ buttons to adjust the SLEEP TIMER level.
Set up function Screen saver and childlock functions How to start screen saver function When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving ( black background). NO SIGNAL 1 Press the MENU menu button, till the FUNCTION menu shown on the right display on the screen. P+ V- MENU V+ 2 Press the P+/- buttons to select "BACKGROUND" and press the V-/+ buttons to turn the P- BACKGROUND function "ON" .
Set up function Continued AVL and calendar functions AVL function Automatic Volume Limit control reduces effect of large volume changes such as when the ads come on. 1 Press the MENU menu button, till the FUNCTION menu shown on the right display on the screen. P+ V- MENU FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE AVL CALENDAR ON ON ON ON V+ 2 Press the P+/- button to select P- "AVL" . 3 Press V-/+ button to turn the AVL function "ON" or "OFF".
Set up function Continued Fade Fade The FADE control allows time for the picture tube to warm up and gently turned on, which can help prolong the life of the picture tube. 1 Press the MENU menu button, till the FUNCTION menu shown on the right display on the screen. P+ V- MENU P- V+ FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE AVL CALENDAR ON ON ON ON 2 Press the P+/- buttons to select "FADE . 3 Press the V-/+ button to turn the FADE function "ON" or "OFF".
Position exchange functions Exchange Exchange This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers. P+ V- MENU V+ P- 1 Press the MENU button again (6 times), till the EXCHANGE menu display on the screen. 2 Press the V-/+ buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 TO 6.
Basic Playback Basic Playback Preparations Press the TV/ DVD button on the remote control or the TV to turn on the DVD player. Basic playback 1. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place a disc which is unplayable in this DVD player (see "Playable discs"). 2.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. There will be some differences for other kinds of disc. SUBTITLE Press " SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc). This function can select up to 32 languages displayed on screen.
Special Function Playback JPEG DISC PLAYBACK When a disc containing standard JPEG picture files is inserted into the player, a navigation menu will be displayed automatically. Use the UP and DOWN cursor buttons to select a file then press PLAY/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the current picture. Press PLAY/ENTER to resume normal playing.
DVD System Setup DVD System Setup General Setup Process SETUP 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/or b item,then press submenu. ..General Setup Page.. TV Display Angle Mark Osd Lang Caption Screen Saver to select the to enter the or bu to setup,then 3.Press CH+/press PLAY/ENTER to confirm. PLAY/ENTER 4.Press SETUP button to exit the menu. . LB 4 3:Ps . On 4 3:Lb ENG 16 9 On Off ..Preference Page..
DVD System Setup(Continued) DVD System Setup General Setup Page ANGLE MARK: Users can select a particular camera angle .when playing a DVD which offers multiple angles. This item allows you to set Angle Mark ON or OFF. On Screen Display (OSD) Language: The TV on-screen display language is English. ..General Setup Page.. TV Display Angle Mark Osd Lang Captions Screen Saver LB On ENG On Off On Off ..General Setup Page..
DVD System Setup(Continued) DVD System Setup Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. SETUP PLAY/ENTER TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Usually please set to MULTI. PARENTAL: The parental control function works in conjunction with the different censorship classes assigned to DVDs.
DVD System Setup(Continued) DVD System Setup SETUP DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. ..Preference Page.. TV Type Auto Parental Password Default Reset PLAY/ENTER Note: Some functions may not be available depending on the type of disc.
Playable Discs The following discs can be played: SVCD VIDEO-CD (VCD) You cannot play discs other than those listed above. You cannot play discs of non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may be not very well or even no performance.
Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD Encode method LD Digital/MPEG Singleside doublelayer 9.4G Doubleside doublelayer 17G 133 242 266 Playing Time minutes minutes minutes 484 minutes Capacity Disc diameter Singleside singlelayer 4.7G Double -side single -layer 8.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can connect a stereo to the AUDIO output terminals on the TV set to enjoy sounds of higher quality. VIDEO and AUDIO output terminals output the video and audio signals being monitored by the TV set. The electric levels of video and audio output signals are fixed.
Troubleshooting guide To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Double or Triple Image Noise Normal This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.
Specifications The specifications offered you here are only for reference and, with the improvement of the products ,there may be some different between the description and the practicality.
01 0090504963