User's manual DWE-3120A Computerized Full-auto Washing Machine Contents Before using Names of the parts..........................The 2nd cover Safety precautions...............................................1 Ins Tallation and adjustment.................................3 Install the water inlet hose....................................5 Using Process Preparation before washing.................................7 Put in the laundries..............................................8 Usage of the detergent.....
Before Using Names of the parts Top lid, I Water absorption cushion Water inlet valve Drain hose hanging hole Top lid, II Detergent box Lint filter(Installed by user) Control panel seat Power cord Handle Drain hose Level meter Inner tub Control panel film Pulsator Back cover Cabinet Fixing foot (three) Lower cabinet Adjustable foot Accessories the end connecting to the washing machine jointer connecting the water inlet hose and the water faucet Lint filter (one piece) the end connecting to t
Before Using Safety precautions Please plug the power plug on special receptacle. Be sure to use three-pins power receptacle. Ensure that the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or cleaning the machine.
Safety precautions Before Using Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine Do not wash laundries with volatile materials (such as thinner, petrol etc.). Benzene The handicapped or children without care shall not use the machine.
Installation and adjustment Before Using Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag and install it into the Filter frame of the inner tub. See to the right Figure. Filter frame Lint filter Adjust the Installation position The largest allowed slope of the shank base of the machine is 2 .
Before Using How to change the direction of the drain hose 1.Lean the machine down gently with the front surface facing the ground. 3.Extend the drain hose from the left side. Push the drain hose into the groove with hands. Back Front Soft item 2.Pull out the drain hose from the groove at the left side. Use groove at this side after direction changing Usage of the drain hose The drain hose shall drain smoothly 1.
Before Using Install the water inlet hose Confirm the water faucet water faucet, suitable water faucet, not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider.
Before Using Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. nut of the water inlet hose 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. jointer of the water inlet valve water absorption cushion.
1 Preparation before washing Using process Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put down the drain hose.
Using process 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 12.0kg. The thickness, size, type of the cloth will influence the actual washing capacity.
3 Usage of the detergent Using process First turn the detergent box down before adding detergent. Add the concentrated composite washing powder into the box directly as indicated in the left figure. Inlet of the concentrated synthetic detergent See to following table for the dosage of the washing powder. How to use the washing powder Direct dissolved in the machine(not applicable for fuzzy and reserve programs) 1.Fill small quantity of water. 2.Add the power. Run for 30 seconds to dissolve it completely.
Using process 4 Use the operation knobsand buttons Description of the function of the knobs and buttons Mode and meaning of the VFD indicator The frame of indicator is not lighted. the frame of the indicator is flashing : indicate the running program. the frame of the indicator is on : indicate the program about to run, or indicate the selected mode the frame of the indicator is flashing rapidly: indicate abnormal condition. Digital tube During working , it displays the remained reserve time (minute).
Using process POWER ON/OFF button PROCESS button Push the "On/Off" button to switch on the power. one or more one programs among soak wash rinse spin can be selected. When the power is on, push it again to switch off the power. After the power is switched on , if the washing machine is idle for 10 minutes, it will switch off the power automatically. POWER ON/OFF START PAUSE PROCESS PROGRAM PROGRAM button The following four programs are available.
Using process Steps of using the operation buttons and description of the steps POWER ON/OFF HWM120-01 RESERVE WATER LEVEL START PAUSE PROCESS PROGRAM POWER Push the POWER ON/OFF button to switch on the power. ON/OFF Push the PROGRAM button to select the suitable automatic program. PROGRAM After switching on the power, the machine will set to standard program automatically. To select other program, push the PROGRAM button till the corresponding indicator is on.
Using process Selection method of the procedure programs Times of pushing the PROCESS button Selected procedure program Wash, rinse, spin (standard program) Contents (the lighted indicators indicate the programs about to run) Applicable procedure When the common laundries need washing , rinsing and spinning Soak Wash Rinse Spin Wash (the washing liquid Repeat using the washing liquid remains in the tub) Soak Wash Rinse Spin Wash (the rinsing liquid remains in the tub) Repeat using the rinsing
Using process * Total time: including the normal water filling time, drain time. * Spin time: the time from intermittent running to finishing. * The normal and jeans automatic programs can be fitted with soak procedure selection. After water inlet, it will first soak for 15-45 minutes, then do washing, rinsing and spinning. * If quick procedure is selected, the machine will set the complete washing program of water level, wash, rinse, spin automatically.
Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box, then set it on the control panel seat The lint filter must be used during washing. It must be cleaned in time after each using Lint filter: 1. Pull it up to dismantle. 2. Clean the filter screen after washing. 3.
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle After the reserve is started, it rings and the digital tube displays E0 * The top lid is not closed.
Packing list Lint filter Components of the water inlet hose Computerized Automatic washing machine One
Specification Model Rated voltage HWM120-01 frequency 220V ~ 50Hz Rated washing / spinning capacity 12.0kg Water level/Water quantity (about) 1/29L 2/35L 3/41L 4/47L 7/65L 9/77L 10/83L Max water consumption 8/71L 6/59L 11/89L 12/96L About 280L (Highest water level; Standard program) Water Injection pressure 0.03MPa~0.