Owner's Manual

ManualsBrandsHaier ManualsAppliancesHaier DWL7075MCSS

ADDING ITEMS DURING A CYCLE

You can add an item anytime before the main wash starts. Open the door and

check the detergent dispenser If the cover is still closed, you can add items.

To add items

1. Open the door slightly. Wait for the spraying action to stop before opening

the door completely.

2. Open the door. If the detergent dispenser cover is still closed, add the item.

3. Close the door firmly until it latches. The dishwasher resumes the cycle after

about a 10 second pause.

OPTION SELECTIONS

You can customize your cycles by pressing an option. If you change your mind,

press the option again to turn the option off.

Select a different option if desired.

You can change an option anytime before selected option begins. For example,

you can press an unheated drying option anytime before drying begins.

Hi-Temp Wash

Select this option to heat the water during parts of the cycle. Higher water

temperatures helps clean tough soils. Hi-Temp Wash, with the Pots & Pans or

Normal cycles, raises the water temperature in the main wash.

This option adds heat, water and wash time to a cycle.

NOTE: Hi-Temp Wash is an option with the Pots & Pans and Normal cycles.

Always use Hi-Temp Wash if you have hard water.

Sanitize Rinse Option

Select this option to raise the water temperature in the final rinse to approximate-

ly 160 F ( 71°C ). The Sanitize Rinse Option adds heat and time to the cycle.

This high temperature rinse sanitizes your dishes and glassware in accordance

With NSF/ANSI standard 184 for Residential dishwasher. Certified residential

dishwasher are not intended for licensed food establishments.

NOTE: Sanitize Rinse is an option with the Pots & Pans and Normal cycle. Only

these sanitization cycles have been designed to meet the NSF/ANSI

requirements.

DWL3525�WHITE�VERSION-160780101

DWL4035�WHITE�VERSION-160860101

DWL7075�WHITE�VERSION -1608701010 1 2 0 4 0 0 0 1 7

SEE�NOTES

ENTER�DESCRIPTION

THIRD ANGLEPPROJECTION

DRAFT WHERE APPLICABLEP

MUST REMAINP

WITHIN�DIMENSIONS

SYMBOLS

QUALITY

ANGULAR

INCHmm

EC�NO:

DRWN:

CH'KD:

APPR:

DESCRIPTION

REV

SIZE

SCALE DESIGN�UNITSDIMENSION�STYLE

THIS�DRAWING�CONTAINS�INFORMATION THAT IS�PROPRIETARY TO�MOLEX

INCORPORATED AND�SHOULD�NOT BE�USED�WITHOUT WRITTEN�PERMISSION

SHEET NO.

DOCUMENT NO.

MATERIAL NO.

APPROVED�BY DATE

CHECKED�BY DATE

DRAWN�BY DATE

TITLE

MOLEX�INCORPORATED

GENERAL TOLERANCESP

(UNLESS�SPECIFIED)

1�OF�1

molex

+0.1

Michael��2009/07/06

E-160XX-101

1:1 mm

GRAPHIC�OVERLAY

USE�ONLY

PRE-RELEASE

REFERENCE

tb_frame_A4_P_ME_TPRev.�D�2004/04/02

123456

1234567

1�PLACE

2�PLACES

3�PLACES

4�PLACES

+0.75

+0.25

WHITE�FROST(X16)

PANTONE�COOL GRAY 9C

TRANSPARENT SMOKE

PANTONE�1805C

PANTONE�427C

PANTONE�COOL GRAY 3C

BACKGROUND:WHITE�COLOR

BUTTON�BACKGROUND:PANTONE�427C

BUTTON TOP &�BOTTOM:PANTONE�COOL GRAY 3C

FONTS:PANTONE�COOL GRAY 9C

RED:PANTONE�RED�1805C

LED�WINDOW:WHITE�FROST.

7-SEGMENT DISPLAY WINDOW:TRANSPARENT SMOKE