user manual

9
This LCD TV uses nominal input voltages of 110-240V
AC. This LCD TV automatically selects the correct
input voltage. It is designed to work with single-
phase power systems. To reduce risk of electrical
shock, do not plug into any other type of power
system. Consult your authorized dealer or service
station if you are not sure of the type of power being
supplied.
Connect the LCD TV with all peripheral equipment
before turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the LCD
TV is not in use.
To the AC Outlet (110
- 240V AC).
Pulls the
AC power cord out from
the LCD TV.
The AC
outlet must be near this
equipment and must be
easily accessible.
AC POWER CORD
CONNECTING LCD TV
IBM-compatible
computers
or Macintosh
computers
(VGA / SVGA /
XGA )
Desktop
type
Cables used for connection (These cables are not
supplied with this LCD TV.)
● PC/VGA Cable (D-SUB 15pin)
● HDMI Cable: HDMI Input
● MAC Adapter (in the case of connecting Macintosh
computer)
●
Audio Cable [Mini Plug (L/R)]
NOTE:
When connecting the cables, AC Power Cords
of both LCD TV and external equipment should
be disconnected from AC outlet. Turn LCD
TV and peripheral equipment on before your
computer is switched on.
PC Input
Audio Output
(stereo)
Monitor Output
MAC
Adapter
HDMI Output
Audio Input
(stereo)
HDMI Input
Laptop
type
Note:
1. You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter.
2. When inputting 1080p signal to HDMI terminal, please use High Speed HDMI Cables to avoid picture/
sound noise and no picture/sound.
Digital AV Equipment
CONNECTING AC POWER CORD
CONNECTING A COMPUTER