user manual

Basic Receiving and Playing Operations
LED -LCD television Owner’s Manual 19
Net Upgrade 
Press

/

to select OK or Cancel to upgrade the TV
set by internet and ash.
Adjust Menu
The TV can be used as a display, and you may adjust
relevant settings.
Press SOURCE to switch the signal
input to PC mode.
Press
A MENU to display the screen main menu, and
then press

/

to select the Adjust menu as
shown in the below figure.
Press B

/

to select the option to be adjusted.
Press
C

/

to adjust it.
Image Position 
This is used to adjusting H-Position and V-Position.
Horizontal-Size 
Press

/

to adjust it(0---100).
Vertical-Size 
Press

/

to adjust it(0---100).
Auto Adjust 
Vertical and Horizontal position of picture can be
adjusted in this item.
Clock 
This is used for adjusting the phase of pixel clock in PC
mode.
Phase 
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Reset 
Return to factory default settings.
Time Menu
Press A MENU button and then use

/

button to
select Time menu.
Press
B

/

to select the desired option, press OK
to enter its submenu.


 
˖
Current Time  : The current time is calculated from the
moment upon turning the TV on. At first, check whether
the time indicated on the TV's clock is consistent with the
standard time of your time zone; if not, adjust the clock as
follows:
Press • MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu,
and then press

/

to select the Timer menu,
afterwards press

/

to select the Current Time
option, press OK to enter the submenu.
Press •

/

to set hour and minute.
Press •

/

to adjust the time.
After finishing time setting, press • OK or MENU to
confirm.
O Time/  On Time: Set a time for the TV to
turn o or on. This function allows the TV to
automatically turn on or enter standby mode
upon reaching the preset time.
Press OK to enter the setting screen, and then •
press

/

to select ON or OFF, if you select ON,
press

/

to set hour and minute. ON indicates
the On/O Time function is enabled while OFF
indicates the function is disabled.
. •
After finishing time setting, press OK or MENU to
confirm.
Note
After setting the On/O Time function, if the TV is AC
o or forcible DC o, the function will be automatically