Model: 23PG27 Please read this booklet carefully before fixing and using and save it for future reference.
INSTALLATION OF MICROWAVE OVEN 1. Remove the packaging and take out the distance limiter from accessory in microwave oven (some models have been instalLCD already), unlock the power cord, according to the specific shape of distance limiter, install by following the given instruction. The purpose of the distance limiter is to make the microwave oven to keep a certain distance from the wall. 2. Take out all the packing. Carefully check whether there is damage to the microwave oven. Such as: a.
Operating dry should only be conducted in the grill mode, it should NOT be conducted at combination mode IMPORTANT SAFETY INSTRUCTIONS When using Microwave oven, the following precautions must be observed: 1. Read all instructions before using and keep it for future reference. 2. Only use utensils that are suitable for use in microwave ovens. 3. The minimum height of free space necessary should be at least 20mm above the top surface of the oven. 4.
begin to cause smoke or catch fire e. If smoke is observed, switch off or unplug the appliance and keep the door closed in order to stifle any flames. f. Close supervision is necessary when using any one-off containers made from plastic, paper or other combustible material. g. When cooking the food with less moisture content or not heat-resistant container, please use low power to avoid burning. 9. To reduce the risk of explosion and sudden boiling: a. Do not place sealed containers in the oven.
21. Any accessories not recommended by the manufacturer may cause injuries to appliances or persons. 22. After using, unplug the power cord, make sure not to put the power cord directly above the cover, or close to the fire and submerged in water. 23. Do not try to cook any food with the oven door opening never put anything into the safety lock. 24. Microwave oven has microwave source and high pressure, and there is no structure for user to adjust. Never remove the out cover. 25. Do not use outdoors. 26.
glass turntable grill rack waveguide cover housing door interlock rotating axis rotating ring oven cavity a. Do not remove the Waveguide cover during cleaning b. Make sure the Waveguide cover installation right and no damage during cooking 2. Control panel Set quick cook menu,Allow you to reheat or cook food automaticall y without entering power level or time. Number button use for Select the food kind and cooking time Clear setting To set the clock.
3.
rest, the appliance will enter standby state. 3. Setting the clock 1. on standby state, touch CLOCK key. Note: on the state of setting clock the step can be omitted. 2. Use the number keys to enter the correct time. You must touch at least three numbers to set the clock (one for hour and two for minutes). 3. Touch CLOCK key again. the system will enter clock state. Note: This is a 24 hour clock.
5. Setting cooking times and power levels A. One-stage cooking 1. on standby state or clock state, Use the number keys to set a cooking time. You can set a cooking time from one second to 99 minutes and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both minutes and seconds. For example: to set 20 minutes, enter 2, 0, 0, 0. 2. press POWER and Number button to select the desired the Power level. 3. Touch START/STOP to start cooking.
2 Set cooking time by pressing the number Button of “1” ， “0” ，“0”， “0” 10:00 3 Touch Power once then Select the desired microwave power by depressing number “ 8” 80P 4 Press Start/stop button to start, and LED will count down to show left time a. The max time which can be set is 99’99’’ b. Never use the grill rack during microwave cooking. c. Never operate the oven empty. d. If you turn the food during operation, press the Start/stop button once and the preset cooking procedure will continue. e.
2.2 Press Grill Combi button to set grill level 2.3 Press “9” ， “0”，“0” to set cooking 3 Start cooking by pressing Start/Stop button G time 9:00 6. Setting “speed defrost” 1. on standby state or clock state, touch SPEED DEFROST key. 2. Enter desired defrosting time by touching correct number keys. Digital timer sets minutes and seconds from left to right so a single digit can be set (5 for 5 seconds) or up to 4 digits (2405 for 24 minutes 5 seconds). 3. Touch START/STOP key.
--For speed defrost and two stage cooking, follow steps above. Before touching START/STOP key, enter two-stage cooking programs. 7. Setting “cook by weight” The oven has default cooking menu for simple operation. You set the type and weight of food, and the oven automatically sets the cooking time and power level. “COOK BY WEIGHT” CODE DESCRIPTIONS CODE YPE WEIGHT RANGE 1 Beef 0.1, 0.15, 0.2……2.9, 2.95, 3.0 Kg 2 Mutton 0.1, 0.15, 0.2……2.9, 2.95, 3.0 Kg 3 Pork 0.1, 0.15, 0.2……1.9, 1.95, 2.
function c. Please wait for few minutes before take food out 8. Setting “defrost by weight” You set the type and weight of food, and the oven automatically sets the defrosting time Example: To defrost 1.15Kg beef Depress Display 1.After power-up, the colon flashes ,Then press Reset button once Or wait for 30sec ： 2. press Defrost By weight button 0. 3. Set defrosting weight by pressing the Number button of “1 ”，“1”.“5” 1.15 4.
C1 C2 Combination of Grill and microwave cooking. 30% of time microwave output and 70% of time light wave Combination of Grill and microwave cooking. 55% of time microwave output and 45% of time light wave In the mode of convection/combo/grill, all of the oven parts, as well as the rack and cooking containers, may become very hot. Use caution when removing any item from the oven. Use heavy potholders or oven mitts to PREVENT SCALD.
1. in standby state or clock state, touch Popcorn key which automatically sets the cooking time of microwave popcorn. 2. Touch Start/Stop key. To reset POPCORN time: tap POPCORN key twice. ENTER TIME appears in display. Touch number keys to enter minutes and seconds. Touch START/STOP key. This new cooking time will remain whenever you touch the POPCORN key until you reset it. ※ Setting “baked potato” For potatoes (0.11 to 017 kg. per entries): 1.
This setting lets you reheat a dinner plate of chilled leftovers with good results. 11. Child lock function Use this feature to lock the control panel when you are cleaning or so that children can not use the oven unsupervised. All the buttons are rendered inoperable in this mode Depress Display Depress and hold Reset button about 3 set lock seconds Depress and hold Reset button about 3 cancel lock seconds OFF ： 12.
13. Cooking Tips The following factors may affect the cooking result: Food arrangement Place thicker areas towards outside of dish, the thinner part towards the centre and spread it evenly. Do not overlap if possible. Cooking time length Start cooking with a short time setting, evaluate it after it times out and extend it according to the actual need. Over cooking may result in smoke and burns. Cooking food evenly Food such as chicken, hamburger or steak should be turned once during cooking.
Microwave safe plastic wrap When cooking food with high fat content, do not allow the plastic wrap come into contact with food as it may melt Microwave safe plastic cookware Some microwave safe plastic cookware might not be suitable for cooking foods with high fat and sugar content. Also, the preheating time specified in the dish instruction manual must not be exceeded CLEANING and MAINTENANCE Microwave oven care The oven should be cleaned regularly and any food deposits removed. 1.
c. Put some orange peel into oven, and then heat them with high power for 1 minute.
socket and the fuse in your meter box. If both the wall socket and the fuse are functioning properly, CONTACT YOUR NEAREST SERVICE CENTER APPROVED. SERVICING SAFEGUARDS MICROWAVE RADIATION！ It is hazardous for anyone, other than a qualified service technician, to carry out any service for repairing operation which involves removal of any cover which gives protection against exposure to microwave energy.
The following conditions may cause undue microwave exposure during servicing. Improper fitting of magnetron; Improper matching of door interlock, door hinge and door; Improper fitting of switch support; Door, door seal or enclosure has been damaged. 1. if LED displays Err0 during working ，it indicates that sensor has been short circuit and you need replace it at the nearest repaired department. 2.
