User Manual HW60-1279 HW70-1279 HW70-1479 HW80-1479 Quick Wash Prewash Cotton Standard Eco Wool Delay Sport Mix Delicate Synthetic R Rinse Spin 20 Temp.
Elements Thanks for purchasing a Haier Product Please read these in ons carefully before using this appliance. The ins ons contain important informa on which will help you get the best out of the appliance and ensure safe and proper installa on, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
Index ......................... 3 Before Use ............................................................................................................................................. 5 ........................ 8 Maintenance ........................................................................................................................................ 16 .................. 19 A er-Sale Service .................................................................................
Do… Make sure that the transport bolt is removed. Use a separate earthed socket for the power supply. Make sure that the plug is accessible. Hold the plug and not the electric cable when unplugging the power supply. Make sure that the fuses in the power circuit are rated for 13A. Keep it away from heat sources and and rubber components from ageing. Make sure that the power card is not caught under or in the appliance and avoid damage to the power cable. Check that hose joints and co water leaks.
Let the power cord be replaced by the manufacturer, his service agent or other accordingly qualified people, in case it is damaged. Ensure that the appliance is not used by people with reduced physical, sensory or mental ck of experience and knowledge without supervision or instru on by a person that responsible for their safety. Supervise children to ensure that they don’t play with the appliance. Do not… Touch de washer door during the washing process, it gets hot.
Before Use Before Use Descrip on This diagram may be slightly different from the layout of the washing machine you have just purchased. Control panel Drain hose Start/Pause Water inlet valve Door handle Power cord Work top Back cover screws Washer door Back cover Filter cover Quick Wash Prewash Cotton Standard Eco Wool Delay Sport Mix Delicate Synthetic R Rinse Spin 20 Temp.
Before Use In on Adjus ng the b om cover Before removing the transpo on bolts, please fix the bo om cover to the bo om of the washing machine. Lay down the machine (fig.1), unscrew the feet and fit the bo om cover with the four holes corresponding to the screw holes of the feet. Then screw the feet back on through the cover and fix it thus securely to the bo om of the machine (fig 2.). It keeps out the dampness and reduces the noise.
Inlet Hose Connect the nut on the inlet hose to the connector on the water valve. Apply inlet hose to a water tap with cold, fresh water. Use the hose-set supplied with the appliance. Old hose-sets should not be reused. Drain Hose Use the drain hose bracket to keep the end of the drain hose retained and prevents the back flow of water. Don't extend the length of the drain hose; if an extended hose is required, please consult a plumber. The height of the drainage outlet must be 80-100 cm.
ons Control Panel 9 10 11 Prewash 。 90 C 1400 。 60 C 1000 。 40 C 500 。 20 C 7kg 2 1 Oper onal Func ons Nº Func on Detergent drawer 4 5 6 7 8 11. Delay 6. 7. Extra Rinse 8. 9. ECO 10. LED Display 1. 2. 3. Program Dial 4. Wash Temp 5. Spin Speed 1 3 Explica on Open the drawer, three compartments can be seen: Compartment 1: Prewash detergent Compartment 2: Detergent for programs 1 to 9.
7 Extra Rinse disappears when the extra rinse ends. 8 Start/Pause When the washing machine is connected to the power socket and a display display start blinking, press the Power switch, the program will be cancelled. 9 ECO 10 LED Display Before a washing program,select this program to set the washing load accordingly. When the laundry is not balanced during spinning, the 11 Delay the washing machine will start the wash program directly.
ons Program Modes 2 1 Detergent compartment for prewash mode 3 2 Detergent compartment 1 Preset spin speed Program Temp Max Preset Wool 0-40 °C 20°C Woolen fabrics 0-60 °C 40°C Chemical fiber fabrics Eco 0-90 °C 40°C 1000 rpm Standard 0-90 °C 40°C 1000 rpm Prewash 0-90 °C 40°C Quick Wash 0-20 °C 20°C Sport 0-40 °C 20°C Mix 0-60 °C 40°C 1000 rpm Delicate 0-40 °C 20°C 500 rpm Rinse -- -- / 1200/1400 rpm Spin/Drain -- -- / 1200/1400 rpm 2 3 1 Fiber type Heavy
ons Spin drying Performance Program Temp Wool 20°C 1 kg 1:00 h .. .. .. 40°C 3/3.5/4 kg 1:10 h .. .. .. 40°C 3/3.5/4 kg 1:18 h .. .. .. Standard 40°C 3/3.5/4 kg 2:28/2:28/2:38h Standard 60°C 3/3.5/4 kg 2:48/2:48/2:58 h Standard 60°C 6/7/8 kg Prewash 40°C 6/7/8 kg 1:46 h .. .. .. Quick Wash 20°C 3/3.5/4 kg 0:15 h .. .. .. Sport 20°C 3/3.5/4 kg 0:25 h .. .. .. Mix 40°C 6/7/8 kg 1:18 h .. .. .. 20°C 3/3.5/4 kg 1:01 h .. .. ..
ons Washing Methods This washing machine is for domes c use only. If the machine is use for commercial purpose the guarantee will not be valid anymore. Do not use it for purposes other than that for which ons given on the label of each garment and wash only it was designed. Follow the in machine-washable garments. Power Supply Connect the washing machine to the power supply (220V to 240V~/50Hz). Water Con on Turn on the tap. The water must be clean and clear.
ons Quick Wash Prewash Cotton Standard Eco Loading the appliance Wool Delay Sport Mix Delicate Synthetic R Rinse Spin 20 Temp. Speed Intense Extra Rinse Start/Pause Power Open the washer door put in the laundry piece by piece. Close the door ghtly. Do not overload the washing machine. Sele ng Detergent The washing efficiency and the performance is determined by the quality of detergent used. Special non-foaming detergent produces good washing results.
ons Sele ng program Prewash 。 90 C 1400 。 60 C 1000 。 40 C 500 。 20 C To get the best washing results, an appropriate washing program should be selected according to the laundry type. Please turn the program knob to select the right program. 7kg R Sele ng fun onal Select the required op ons. (Refer to the "Control panel" pages 8, 9 and 10) Se ng washing temperature Press and hold down the temperature bu on un he desired temperature is selected.
ons Care Chart Machine Wash, COLD Machine Wash, WARM Machine Wash, HOT Machine Wash,COLD Permanent Press Machine Wash,WARM Permanent Press Machine Wash,HOT Permanent Press Machine Wash,COLD Gentle Cycle Machine Wash,WARM Gentle Cycle Machine Wash,HOT Gentle Cycle Hand Wash Tumble Dry,NO HEAT Do Not Wash Tumble Dry,LOW HEAT Do Not Tumble Dry Line Dry Bleach as needed Any bleach, like Clorox® , may be safely used Tumble Dry,MEDIUM Drip Dry Tumble Dry,HIGH Dry Flat Non-chlorine Bleach as needed Us
Maintenance Cleaning and Care A er washing Turn off the water supply and pull out electricity plug each wash. Open the washer door to prevent form on of moisture and odours. If the washing machine is idle for a long period, drain the water in the machine and replace the drain hose. Cleaning the detergent drawer Clean the detergent distribu on drawer regularly.
Maintenance To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve filter regularly. Maintenance or service wash A maintenance wash is done to clean the washing machine out by running a high-temperature (90°C Co on) program once a month. The high temperature kills off bacteria and unwanted fungal growth.
Err7 Err8 UNb End 19:30 1:25 Motor Error Contact the maintenance personnel. Water exceeds protec ve level. Contact the maintenance personnel. A er the last rinsing cycle finishes, spinning fails completely due to unbalance of the laundry. End of wash cycle. ¬Status inform on: Preset me for delayed opera on. The remaining me is 1 hour 25 minutes. Control panel lock fun on: Press the "Delay" and the "Start/Pause" bu ons simultaneously for 3 seconds a er g a program.
Trouble-Shoo ng Trouble-Sho Problem Washing machine fails to operate. Causes Solu ons Power failure. The washer door is not properly closed. Machine has not been switched on. Check the power supply. Close the washer door properly. Make sure the machine is switched on. Washing machine cannot be filled with water. Water tap is not turned on. Water pressure is less than 0,03 MPa. The inlet hose is kinked. Water supply failure. The program knob is not properly set. The washer door is not properly closed.
Technical Data Basic technical informa on regarding the appliance. HW70-1279/HW70-1479 Power source Max. working current (A) Water pressure (MPa) Nominal load (kg) Spinning speed (r/min) Washing programs Max power (W) Dimensions (HxDxW mm) Net weight (kg) Power consump on of the off-mode(W) Power consump on of the -on mode(W) 220 - 240V~/50Hz 10 0.03≤P ≤1 7 1200/1400 11 2050 850 x 600 x 595 71 0,48 0,48 HW60-1279 Power source Max.
Product Fiche (according EU 1061/2010) Trade mark Haier Haier Model No.