Installation guide

Cooktop Installation Manual
ENGLISH
5
Product Dimensions and Cutout Requirements
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8" diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
Figure 2. Coutout dimensions
Figure 2. Coutout dimensions
Figure 1. Product dimensions
CUT OUT
WIDTH
ABCD
24”
MIN. 23-1/2”
(59.7 cm)
MAX. 23-5/8”
(60.0 cm)
MIN. 19-5/16”
(49.0 cm)
MAX. 19-3/8”
(49.3 cm)
2-1/2”
(6.35 cm)
MIN. 3”
(7.62 cm)
30”
MIN. 29”
(73.7 cm)
MAX. 29-1/8”
(74.0 cm)
MIN. 19-5/16”
(49.0 cm)
MAX. 19-3/8”
(49.3 cm)
2-1/2”
(6.35 cm)
MIN. 3”
36”
MIN. 34-7/8”
(88.6 cm)
MAX. 35”
(88.9 cm)
MIN. 19-5/16”
(49.0 cm)
MAX. 19-3/8”
(49.3 cm)
2-1/2”
(6.35 cm)
MIN. 3”
(7.62 cm)
3-15/16”
(7.4 cm)
20-1/16” (51 cm)
24-1/2” (62 cm)
36” (91 cm)
3-15/16”
(7.4 cm)
20-1/16” (51 cm)
7-5/8 “ (19,3 cm)
86
5-11/16 “ (14,4 cm)
30” (76 cm)
3-15/16”
(7.4 cm)
20-1/16” (51 cm)
24”
36”
30”
(7.62 cm)