Installation guide

Cooktop Installation Manual
ENGLISH
7
We recommend to that you consider the minimum
dimension of cut-out size n the case of new n-
stallation.
Mobile Home Installation
The installation of this cooktop must conform to the
Manufactured Home Construction and Safety Stan-
dards, Title 24 CFR, Part 3280 (formerly the Federal
Standard for Mobile Home Construction and Safety;
Title 24 HUD part 280); or when such standard is not
applicable, the Standard for Manufactured Home In-
stallations (Manufactured Home Sites, Communities
and Setups), ANSI A225.1 - latest edition, or with local
codes.
In Canada, the ins
tallation of this cooktop must
conform with the current standards CAN/CSA-Z240 -
latest edition, or with local codes.
Important:
x For solid surface material installations such as
Surel™ and Corian
®
, consult with solid surface
manufacturer. Apply heat reflective tape such
as
Scotch
®
Aluminum Foil Tape #425 or #427
around the cutout so that it folds over on the top
and sides.
x DO NOT WRAP THE TAPE UNDERNEATH THE
COOKTOP.
x Be sure the tape extends beyond the outermost
flange of the cooktop. All corners should be
cov
ered with tape.
Figure 4. Solid surface countertop installation
The appliance should not be installed with a
ventilation system that blows air downward
toward the range. This type of ventilation system
may cause ignition and combustion problems
with the gas cooking appliance resulting in
personal injury or unintended operation.