User Manual Dishwasher HDW15V2*2 Models AA
Thank you for purchasing a Haier product Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
Content Safety ............................................................................................... 3 Product Description....................................................................... 5 Control Panel ................................................................................. 6 Programmes ................................................................................... 8 .............................................................................. 9 Daily Use ....................
Safety Intended Use The appliance is designed for domestic use inside the house. It is not intended for commercial or industrial use. Do not use it for purposes other than that for which it was designed. may cause hazards and loss of warranty claims. Standards and Directives This product meets the requirements of all applicable EC directives with the corresponding harmonised standards, which provide for CE marking.
Safety During Daily Use Do… ▶ supervise children to prevent them playing with the appliance. ▶ put sharp pointed objects (e.g. knives) in a way that there is no danger of injury. Do not… open the door while a programme operates. The appliance can release hot steam. keep the appliance door open without supervision to prevent tripping and falling. let children or pets come close to the appliance when the door is open. sit or place heavy items on the open door.
Product Description 1. 2. 3. 4. 5. 6. Upper basket Upper spray arm Lower spray arm Lower basket Cutlery basket Rating label 7. 8. 9. 10. 11.
Control Panel HDW15V2*2 : 1 1. 2. 3. 4. 5. 6. 7. 2 5 3 4 3 6 7 ON / OFF button PROGRAMME SELECT button Programme Indicators Status Indication Time & Info Display/Indicator Icon START DELAY button START / PAUSE button Time & Info display ► ► ► ► ► Programme cycle time Programme start delay time Error codes and service information like Remaining time in hours of a delayed programme starts, e.g. Remaining programme cycle time in hours + minutes, e.g.
Control Panel Indicator Icon If the indicator lights up: Rinse aid is empty! After adding Rinse Aid, press for 3 seconds and the light goes out. Rinse aid Water tap water. Check section: “TROUBLESHOOTING” Child Lock If the indictor lights up:Child lock mode has been opened Delay start If the indictor lights up:Delay start mode has been opened Status Indicators Wash If the indicator lights up: the Dishwasher is washing. Rinse If the indicator lights up: the Dishwasher is rinse washing.
Programmes Light to heavy soil: Casseroles, sauces, potatoes, pasta, rice, roasted or fried food Non-delicate: Dinnerware, cutlery, pots and pans Heavy Heavy soil: Casseroles, sauces, potatoes , pasta, rice, roasted or fried food Non-delicate: Dinnerware, cutlery, pots and pans Light2) Fresh soil: Coffee, cake, milk, cold drinks, salad, sausages Non-delicate: Dinnerware, cutlery, glassware Glass Light soil: Coffee, cake, milk, cold drinks, salad, sausages Delicate: Glassware, dinnerware, cutlery
First Steps Remove all packaging materials, keep them out of children’s reach and dispose them in an environmentally friendly manner.There could be water residue inside the appliance due to quality checks in the factory. Perform the following steps: 1. 2. 3. 4. 5. Install the appliance. Refer to section INSTALLATION. Only for use of Multitabs: Adjust the rinse aid setting. Refer to section DIFFERENT SETTINGS FOR RINSE AID. Fill the rinse aid dispenser. Refer to section HOW TO FILL THE RINSE AID DISPENSER.
Different Settings for Rinse Aid Rinse aid is added during the last rinsing phase to dry the dishes without streaks and stains. Detergent (e.g. powder, tablets, ...) requires separate rinse aid: Factory default setting: . No settings are necessary. The rinse aid is added from the rinse aid dispenser only. Detergent with multifunction (e.g. Multitabs) combine detergent and rinse aid: The rinse aid setting should be adjust to .
How to Adjust Settings To adjust the Rinse Aid level 1. The appliance is switched on. about 3 seconds until : and 2. Press and hold ►The display shows the current Rinse Aid setting (the default is ). to change the Rinse Aid setting 3. Press in steps between (minimum dispense) and (maximum dispense). for 1 second. 4. To exit the Rinse Aid menu, press and hold Activate / De-Activate the Buzzer 1. The appliance is switched on. 2.
Daily Use Please note that not all sales models comes with identical features and options. So pictures of that chapter are sometimes different to your dishwasher model. Explanations try only to point out basic model variants. 1. Load the baskets. 2. Press the ON/OFF button to activate the appliance. ▶ If the rinse aid indicator is on, fill the rinse aid dispenser and reset the rinse aid indicator; refer to section HOW TO RESET THE RINSE AID IDNICATOR. Add the detergent; refer to section DETERGENT.
Daily Use Load the Baskets With delicate glasses and porcelain make sure they are labelled dishwasher-proof. ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. Do not put in the appliance items that can absorb water (sponges, household cloths). Only use the appliance to wash items that are dishwasher-safe. Remove remaining food from the items. Soften burned food on the items before washing.
Daily Use Upper basket ▶ The upper basket is designed to hold items like glasses, cups, saucers, plates, small bowls and shallow pans. ▶ You can adjust the height of the upper basket to create more space for tall items in the lower basket. See below. ▶ Place small items on the foldable cup holder. IMPORTANT! Place sharp and pointed items with the blade pointing downward into the knife rack, to keep them out of harms way.
Daily Use 15
Daily Use Detergent Please use only a dedicated dishwasher detergent and follow the related instructions and dosage on its package. 1. If the lid is closed press the release button (A) to open the lid. 2. Put any detergent into compartment (B). 3. If the programme has a pre-wash phase, put a small quantity of detergent on the inner part of the appliance door. Refer to section PROGRAMMES. 4. Close the lid. Make sure that the release button locks into position.
Daily Use Start a Programme 1. Close the door. 2. Press the ON/OFF button . 3. Press the program button you want to select and then the required programme indicator lights up. 4. If desired select a start time for a delay start. Refer to section START A PROGRAMME WITH DELAY. 5. Press the START/PAUSE button to activate the programme or the delay start. The programme starts. The display acts now as countdown of the remaining run-time. The appliance remembers the last programme you used.
Daily Use the additional function indicates that the icon will be lit, and if it cannot be matched, it will not be lit. 4. If the currently selected washing procedure is rapid washing, washing and single rinsing, press the and add the button, the washing time can be increased by 10 minutes at a time ,up to three times . 5. Press the button to start the program. Start a Programme with Delay Set a start time by the following procedure in order to delay a programme start: 1. Set a programme.
Daily Use Cancel Start Delay / Programme 1. 2. Press the ON/OFF button for about 1 second. ▶ The start delay is cancelled. ▶ The programme is aborted. ▶ The appliance is switched off. Start a new programme and a delayed start if desired. CAUTION! If a programme will be aborted in the process of washing dishes, the residue of detergent remains on the dishes. These can cause damage to health! Make sure to rinse off the detergent residues completely before using these dishes again.
Care and Cleaning Inspect and clean your appliance at regular intervals. Basically any detergent Care and Cleaning the Filters 1. 2. 3. 4. 5. remove it. A anticlockwise and A press the latches and unplug A1 from A2. B. tion. 6. until it locks. B to its initial posiA and put it into B.Turn it clockwise washing results and possibly serious damage to the appliance.
Care and Cleaning Care and Cleaning of the Spray Arms Spray arms should be regularly inspected for dirt. If needed the spray arms could be removed. Upper spray arm 1. Turn bayonet socket to the left to remove spray arm. 2. Remove remaining parts of food remnants with a thin pointed object. 3. Flush with water and check all the holes are clear. 4. Turn bayonet socket clockwise to fasten spray arm. Lower spray arm 1. Pull at the center to remove spray arm. 2.
Troubleshooting expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service CAUTION! ▶ Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. ▶ trical experts, because improper repairs can cause considerable consequential damages. The appliance does not start, or it stops during operation Problem Possible cause The programme does not start. Appliance door is open.
Troubleshooting Error codes on the display Problem Possible cause Acoustic alarm, display shows Water tap is closed. ALARMCODE The appliance does Acoustic alarm, display shows ALARMCODE The appliance does Acoustic alarm, display shows ALARMCODE . • Open the water tap. Note: Whenever Error ‘ ’ is solved switch off the appliance and restart the programm. Water inlet hose has a kink or Make sure that the position of a bend. the hose is correct.
Troubleshooting Washing Results are not satisfactory Problem The dishes are not clean. Possible cause Possible solution Filters are clogged. Filters are not correctly assembled and installed. correctly assembled and installed. Spray arms are clogged. Remove remaining food remnants with a thin pointed object. Programme was not applicable for the type of load and food remnants. Make sure that the programme is applicable for the type of load and food remnants.
Troubleshooting Problem Possible cause Possible solution Dry water drop stains on glasses and dishes. Rinse aid dosage is too low. Increase the released quantity of rinse aid. Refer to section DIFFERENT SETTINGS FOR RINSE AID. Quality of rinse aid or Multitab. Cleaning product too old; product. change the The dishes are wet. • Programme had no drying phase. • Programme had a low temperature drying phase. Open the door slightly and leave it ajar (about 100 mm) to help the drying process.
Installation WARNING! Any i refer to section SAFETY. Free Standing Installation 1. Install the appliance on solid ground. Adjust accurately all feet INFORMATION! Only with a correct level the appliance door closes and seals correctly. Installation under Worktop 1. The dimensions of the recess should at least agree with the dimensions in . 2. Put the appliance adjacent to the slot. Make sure that all connections (water, drain water, power) are neatly positioned and connected. 3.
Installation Fresh Water Connection IMPORTANT! ▶ ▶ >10mm ▶ The appliance should be connected to the water main using the new water inlet hose supplied. Old hoses should not be used. ▶ Do not shorten the inlet hose. fig.A 1. 2. 3. 4. 5. 27 Take note of water connection requirements. ▶ The dishwasher has a single valve water connection. ▶ We recommend a cold water connection for best performance and energy efficiency. ▶ The incoming water temperature should not exceed 25°C.
Installation Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 400 and 850 mm above the appliance bottom line! An extension hose for the water drain hose must not exceed a total length of 4 m and must have the same diameter as the water drain hose. Following connections are possible: Drain hose to sink ▶ Hang the drain hose with the U-support over the edge of a sink with adequate size. ▶ against slipping.
Technical Data Check the electrical data on the rating label (located on the left-hand side of the dishwasher’s stainless steel inner door). Should the data on the rating label be different to those specified below, consider those on the rating label as correct. Suppliers name or trade mark Supplier´s model identifier Rated capacity in standard -place settings Mains water pressure Power voltage Maximum current intensity Haier HDW15V2*2 15 0.03-1 MPa (= 0.
Customer Service We recommend our Haier Customer Service and the use of original spare parts. TROUBLESHOOTING. ▶ your local dealer or ▶ the Service & Support area at www.haier.com.au or at www.haier.co.nz To contact our Service, ensure that you have the following data available. The information can be found on the rating plate at the door. Model ____________________ Serial No.
Standards Test Wash programme Powdered detergent quantities Rinse aid dosage level Maximum number of place settings Height adjustment of upper basket Eco When the programme is finished, open the door 100mm to help with drying 5 g pre-wash + 28.