HDY-C70/HDY-C70 ME
B C D
Operation Manual Name of parts Program selector Container handle HDY-C70/HDY-C70 ME Door Table of Contents Before using the dryer Name of parts....................................1 Plinth Important Safety Instructions .....2-3 Installation.....................................4-6 Preparation ......................................7 Earth terminal Back plate How to operate the dryer Control panel.................................8-9 Power supply cable Programming guide.........................
Important safety instructions Important safety instructions To reduce the risk of fire, electrical shock, or injury to persons when using this dryer, follow basic precautions,including the following: 17.If the supply cord is damaged,it must be replaced by the manufacturer ,its service agent or similarly qualified persons in order to avoid a hazard. 18.Do not operate the dryer if any parts are missing or broken. 1.Read all instructions before using this dryer. 2.
Installation Installation Dimensions b a a = 855 mm b = 620 mm c = 595 mm Weight = 43 kg c Packing accessories Checklist of the accessories and materials provided with the machine: Name Owner's manual Certificate of Conformity Reversible Door This unique feature allows you to install the dryer in the most convenient position in you home its opening direction may be changed. The procedure is as follows: 1. Unscrew the 4 hinge screws holding the door onto the machine and remove the door. 2.
Preparation Installation Drain switchover During the drying of the laundry, the condensate water is automatically collected in the box inside the machine, the water needs to be removed from the box after every drying cycle. If your dryer is in the vicinity of a drain, you may allow the condensed water to discharge directly into the drain through the drainpipe provided to avoid emptying the box every time. The method to connect the drainpipe is as follows: 1.
Control panel * ) ( ' Control panel + , & % $ - A - Program selector Turn this knob to choose the drying program you desire. This type of dryer has 11 program options . For description of specific programs, refer to the list of programs on Page 10. When the drying program is selected,the relevant indicator light is on. B - Start/Pause button Gently touch this button to start the dryer.
Programming guide Drying methods Degree of drying Max. load Type of Laundry Very dry Extra dry 7 kg Heavy cotton fabrics, sheets, gowns. Normal * Ready to wear 7 kg Cotton fabrics, sheets, coats Slightly damp Ready to iron 7 kg Ordinary cotton fabrics Damp Damp 7 kg Ordinary cotton fabrics Program COTTON SYNTHETIC 1.Turning on power Insert the power plug into an appropriate wall socket and turn on the. power. Operating power supply: (220-240)V/50Hz. 2.
Cleaning and maintenance Cleaning and maintenance 1 Cleaning the surface Wipe the body of the dryer and the control panel with a damp cloth. Remember not use any organic solvent or corrosive agent to avoid damage to the machine. 2. Cleaning the filter screen To ensure a good ventilation during drying, the filter screen must be cleaned after every drying program is complete. Open the door and remove the filter screen from the machine.
Trouble shooting Trouble shooting The following must be confirmed before calling for service: Problem The dryer does not switch on The dryer does not switch on and the screen displays "End" The drying result is not up to standard and the drying cycle takes too long.
Wiring circuit Specifications Item K1 NTC K2 (220-240)V/50Hz N FA PCB1 HDY-C70/HDY-C70 ME Power supply K3 H Type T G L PCB2 Maximum operating current(A) 12 Rated load(kg) 7 Drying program 11 Maximum power(W) 2800 Dimensions(H×D×W)mm R1 L P S R2 855h620h595 h h Waterproof level M IPX4 T1 T2 FA-Electromagnetic interference inhibitor R1ˉHeating1 R2ˉHeating2 T1ˉThermal cut-out T2ˉThermostat PSˉDrainage pump K1ˉ Door switch MˉMotor K2ˉ Level switch LˉLamp NTCˉTemperature senso
