Electric Vented Tumble Dryer Sécheuse Électrique Ventilée Secadora eléctrica de ropa con ventilación .
English electrical REQUIREMENTS Grounding Instructions: T his appliance must be grounded. It is equipped with a 3-wire cord having a grounded plug. The plug must be plugged into an outlet which is properly installed and grounded Warning – Improper use of the grounded wire can result in the risk of electric shock. Consult a qualified electrician if necessary. Do not attempt to defeat this safety feature by modifying the plug.
English PARTS AND FEATURES Front Windows Drum (HLP141E Only) Exhaust and Lint Filters Door Air Intake Digital Control Panel Door Gasket Status 150 Dry 120 Cooling 90 End Cycle 60 Clean Lint 30 Dry Time A U T O D R Y Normal Heavy High Delicate Low Timed Dry Air-Dry Cycles Power On/Off Start Pause Temp HLP141E Back Dryer Hanging Wall Hook Power Cord Casing Hose Clamp Exhaust Vent Back Cover Spacer 5 Exhaust Housing
English SET UP INSTRUCTIONS Tools and Parts Required for Installation: • • • • • • Philips Head Screw Driver Flat Head Screw Driver Electric Drill and 1/8 inch drill bit Stud finder (optional) (6) Wood screws for mounting plywood Plywood board; size 30 (h) by 24(w) inches or wood slats Venting materials: • • • 4 inch diameter metal exhaust rigid ducting and fittings or UL flexible metal dryer vent hose, that should not exceed 6 feet.
English Assemble Dryer for Installation Screw mounting hook bracket and wall spacer to dryer with screws provided. 1. Attach Hanging hook bracket using the 4 screws. 2. Attach the 2 wall spacers to the bottom of the dryer, using the 2 screws. Spacers 3. Attach Exhaust Housing. Connect vent housing to dryer using hose clamp provided to the exhaust pipe. Exhaust Pipe Exhaust Vent Housing Hose Clam 4. You have two choices of the exhaust pipe housing direction.
English Venting The Dryer Proper venting of the dryer is very important. Determine the best and safest ducting for the dryer. 1. 2. 3. 4. WARNING! Clothes dryer installation must be performed by qualified installer. Install the clothes dryer according to the manufacturer’s instructions and local codes. Do not install a clothes dryer with flexible plastic venting materials.
English Installation INSTRUCTIONS Location for installation and options for various walls 1. There are 2 mounting options- either using wood slats or a whole plywood board. The dryer installation to the wall should be able to accommodate the weight of the unit of 52 lbs. plus about 10 lbs. for clothing (or approximately 62 lbs). We suggest you use a plywood board for added support and safety, this is the best way to mount. 2. Determine dryer position on the wall.
English Wall Mounting Instructions 5. For the best installation Locate the wall studs in order to securely mount the unit on the wall. Use 1 plywood board size 30 (h) by 24(w) inches and mount into the wall studs using (6) wood screws (not provided) Stud Use wood screws 30 inches Stud Plywood board for supporting the dryer 24 inches 6. Mark the required dryer bracket position and holes using the template provided.
English 8. Hanging dryer on wall Lift the dryer (with the help of an assistant) and insert the hanging hook onto the 2 mounting brackets on the wall. The wall spacer will distance the dryer from the bottom. Hang dryer onto mounting brackets on the wall Completing Installation 9. Connect ducting to the dryer Connect the exhaust ducting (not provided) from the dryer venting housing to external outside dryer vent using a hose clamp (not provided). Note Must purchase these parts from local hardware store.