English IMPORTANT SAFETY INSTRUCTIONS Warning ~ To reduce the risk of five, electrical shod, of injury to persons when using your appliance, follow basic precautions, inducing the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for ifs intended purpose as described in this use and care good. 4. Use only detergents or softeners as recommended for use in this manual and keep them out of the reach of children. 4.
Stylish 20. This supplication must be connected fo o proper electrical outlet with the correct electrical supply. 71. Proper grounding must be ensured fa reduce the tsk of shock and fire. DO MOT CUT OR REMOVE THE GROUNDING PLUG. I you do not have thees-prong electric receptacle outlet in the wall, have o certified electrician install the proper receptacle. The wall receptacle MUST be properly grounded. 72. Hydrogen gas may be produced if the water heater has of been used in more than 2 weeks.
English Table OF Contents SAFETY INSTRUCTIONS PARTS AND FEATURES OPERATING YOUR WASHER UNPACKING AMD ACCESSORIES INVENTORY PROPER LOCATION...
English OPERATING INSTRUCTIONS Parts and Features 1. Top Lid 3. Washer Cabinet 2. Control Panel 4.
English 1. Water Inlet Valve 5. Power Cord {110-120 VOLTS, 2. Back Panel Service Entrance &0Hz, 15 AMPS) 3, Leveling Legs &. Roofing Label 4. Power Cord Clip 7.
Embellish OPERATING YOUR WASHER The Control Panel Power ON/OFF: (1) » Press the bunion once fo turn ON the power to fhe washer. Press if again jo turn the power OFF, Starter: {2} + Press this bunion once to start the wash process. Press this bunion acne gain fo pause the activity during the wash cycle. Push it gain 1o resume the wash cycle. Program Select (3) » Select your desired cycle program by pressing the "Program® button. There are & options fo select from.
English + Pr-treat all stains and heavily soiled areas for best results + Do not aver loud your washer + Close the door proper after loading the dotes. « When loading wet items, keep water level high enough to keep fhe unit in balance and to faff clothing fo last easily in Hie water. Proper Use of Detergent Fill water in the fub of the "Low" water level. + Add the detergent. + Loud the washer.
English Selecting the Wash Clyde Press the "Program Select” button for your desired wash cycle. Choose between 6 options The offal dime induces the normal water inlet dime and drain time. The total washing lime may be affected by the tower inlet pressure and water level. The spin time is the dime farm the intermittent running to the finishing of the cycle. in the "Heavy program, the first soak is approximately 20 minuses, per-wash is approximately 8 minutes.
English End-of-Cycle Signal The machine will beep cf the end of the cycle, indicating that the washing is complete. The “Wash/Rinse/Spin” indicator lights will steel be ON. The washer will tun OFF automatically in approximately 10 minutes after five completion of the cycle Closing the Yop Lid For safety purposes, the top lid must always be dosed during the wash process, If you pane the top lid while the wash cycle is in progress, you will observe the following: » An alarm will sound.
English Unpacking and Accessories Inventory Unpacking 1. Remove all packing materials. This includes the fum base and olf adhesive type holding the washer accessories inside und outside. Slide out and remove the fathom Styrofoam that is used to prefect the washer from shipping damage due fo vibrations and shock. 2. Inspect and remove any retiring packing, lope or printed materials before using the washer. Note: The bottom panel is located between the upper foam profession und box.
Enthrall Proper Location General + Select a sublease location for the washer on o hard even surface away from direct sunlight and heat sources radiators, baseboard heaters, cooking appliances, efface. * Any floor unevenness should be corrected with the leveling leg located on the bottom right corner of the washer. * The washer must be placed at room temperature. You must not place the washer where the temperature is af or below freezing.
Embellish installation Instructions Read carefully and understand all installation instructions before installing this washing machine. If after completing the process you are still unsure whether the washer has been proper installed, we recommend that you contact a qualified installer.
Fanlight Seedling the Lint Filter The lint filter must be installed before the washer is used, The lint filter is packaged with the User Manuel Leveling the Washer Your washer has an adjustable leveling leg they is located on the front right corner. After properly placing your washer in its final location, you may level the washer. + Loosen the adjustable nut. The leveling lag can be adjusted by furring i counterclockwise lo raise the washer and clockwise fo lower the washer.
Embellish Installing Quick Sink Adopter: When installing the quick sink faucet adapter to the faucet, follow the steps below: 1. First, remove the aerator from your faucet nozzle and determine the size/type of the faucet. 2. Once you determine the size/type of the faucet (Outside Threaded End or Inside Threaded End), place the proper sized rubber washer info the silver faucet adapter 3. Attach the silver faucet connector to the faucet. 4.
Eon lush Electrical Conned ions Grounding Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock hy providing an escape wire for the electrical current. This appliance is equipped with a cord having a grounding wire with a grounded plug. The plug must be inserted into an outlet that is properly installed and grounded.
English Proper Care and Cleaning Waning! Always unplug your appliance before dealing to avoid electric shock Ignoring this warming may resell in personal injury or death. Before using cleaning traduces, always read and follow the cleaning product manufacturer's instructions and warnings fo avoid personal injury and product damage. General Cleaning and Maintenance Use only a damp or sudsy cloth to clean the control nonslip.
English Troubleshooting Guide Before calling for service, determine the symptoms and follow the suggested solutions: Washer does not operate: « Check if the unit is plugged in. The plug may hove come loose. * Check if the electrical wall receptacle is of proper voltage. + Check if the circuit breaker needs fo be reset or if the fuse needs to be replaced. Check if the washer is overloaded. Reload and redistribute the clothing to resemblance the machine Check if the door is open.
Fogyish Washer mules noises: *» Washer moy need to be reinstalled and leveled. Refer to the washer installation econ, + Wash load may need fo be re balanced, as the load may be uneven. » Coins, loose change, buttons or other heavy newbies may be making the noise. Refer fo the Operating Guide — Normal Operating Sounds + A squeaking sound may be due fo an overloaded washtub. » Vibration noises are due fo an improper leveling of the washer or an uneven distribution of clothing in the tub.
English Limited Warranty in Home Service Full ONE Your Warranty For 12 months farm the date of original retail purchase, Heifer bill repair of replace ony pit roa of forgo including labor ot fails due fo a defect in materials or workmanship. Lined Warranty Abe one yen from the original retail purchase eve, Hater will provide a part af po cost, us indicated below, to replace sad pert as a result of & defect in materials or workmanship, Haber is solely responsible for the cost of the part.