PLASMA TV OWNER ' S MANUAL Please READ this manual carefully before operating your TV, and retain it for future reference.
WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product.
IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer`s instructions.
SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number serial number Date of purchase Staple your receipt to your manual. You will need it to obtain warranty service.
Introduction Contents War nin g . . . . . . . ... ... ... ... .. . . . . . . . . . . . . . . . . . . . . . . . Saf ety I nst ruc tio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. Introduction Con tro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... ... ... ... .. Connection Options . . . . . . . . . . . . . . . . . . . . . ............. Universal Remote Controller . ............ . . . . . . . . ...... Installation Acc ess ori es . . . . . . . . . . . . . . . . . . .
Introduction Controls -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front panel controls HP42BB 1.INPUT: all input source display and OK confirm. 2.CH-/+ Program minus and plus, menu options 3.VOL-/+ Volume increase and decrease, menu reset and entry 4.MENU Menu display 5. POWER: Is used to activate the display or return to standby mode.
Connection Options Back panel controls Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box. ANT IN PC HDMI2 HDMI connect a signal to HDMI/DVI. S-Video Input Connect S-Video out from an S-VIDEO device to the S-VIDEO input. AUDIO/VIDEO output Y COMPONENT L Pb Pr R S-VIDEO AV OUT L VIDEO L R R HDMI2 connect a signal to HDMI/DVI. HDMI1 Audio Output Connect audio from various types of equipment. Note: In standby mode, these ports will not work.
Introduction Universal Remote Control - The remote control cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction TV DVD VCR SETBOX CABLE AUDIO Press the SELECT button repeatedly to select one of the system modes in which the remote control can be used. When the desired device is selected, the corresponding LED lights on 5seconds.
Installation External Equipment Connections Accessories SELECT CH.LIST PIP FAV.LIST SWAP P.MODE AUDIO LIST AUDIO SWAP POSITION TFT-LCD TV OWNER ' S MANUAL S.MODE CC FREEZE UIDE NPUT IN U EN MODEL:L40A8A FO OK Please READ this manual carefully before operating your TV, and retain it for future reference. EX P IT SL ARC EE SAP VOL+ CH+ VOL- CH- Q.
Installation External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you.
Installation External Equipment Connections External A/V Source Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use COMPONENT L Pb Pr Y R S-VIDEO AV OUT VIDEO L L R R 1. Select the input source with using the INPUT button on the remote control. 2.
Installation External Equipment Connections DTV connection - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
Installation External Equipment Connections PC connection How to connect 1 . To get the best picture quality, adjust the PC graphics card to 1024 x768 . 2 . Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherPC IN or DVI IN to display the PC on the TV.
Installation External Equipment Connections Monitor Out Setup The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TV`s AV OUT. See the Operating Manual of the second TV or monitor for further details regarding that device`s input settings. Y2 Y1 Pb2 Pr2 Pb1 Pr1 L L R R S-VIDEO AV OUT L VIDEO L R R Notes: COMPONENT, PC, HDMI,DTV input sources cannot be used for Monitor out.
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Owner s Manual 15
Installation External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. HDMI1 PC/DVI OPTICAL AUDIO IN Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.
Take the table stand off You can take off the table stand if you don`t want to use the table stand. HP50B HP60B Please release the screws 6XM8, see the picture.
Operation Operation -In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. Switching On/Off the TV set 1. First, connect power cord correctly, and then press POWER button on the remote control to turn on the TV. 2. Select the viewing source by using INPUT button on the remote control. 3.
Operation Channel menu This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on. Automatic Scan - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the All Channel List.
Operation Channel menu Manual Scan If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Video 1 Press the MENU button and then use / Audio button to select the Time Channel menu. A 2 Press the 3 Press the button and then use button and then use / / button to select Tuner. B C button to Select Cable or Air Tuner Air Type Auto Scan Manual Scan Channel NO Fine Tune Frequency Channel Edit Program Function Rename Air 4 67.
Operation Channel menu Edit Program You can create your own Favorite List. Use the FAV.LiST butt on on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List.
Operation Select the desired program 1 Using the CH+/- buttons. Press the CH+ button to select a channel number in number increasing direction. Press the CH- button to select a channel number in number decreasing direction. (Note: If Skip is ON on one channel, press CH+/- button, the channel will not appear.) Select the desired sound Press the VOL-/+ or / buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100.
Operation Video menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. How to select picture modes The picture mode provides the pre-defined image settings. There are four settings: standard/ vivid /mild/custom. Press P.MODE button repeatedly on the remote control to select the desired option(Standard/Vivid/Mild/Custom). Standard: normal mode. Vivid: mode of watching the movement of picture.
Operation Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. - Note: If a fixed image is displayed on the screen for a long time, the image may become permanently burned on the screen and remain visible. 1 Press the ARC button the Aspect Ratio menu appearance on the screen. 2 Press the / button to select the desired picture format. 3 Press the OK button to confirm.
Operation Audio menu How to Select Audio modes Press S.MODE button repeatedly on the remote control to select the desired option (Live/POP/Rock/Custom). Custom A spare setting that can be adjusted to personal tastes. Live Normal sound with moderate bass and treble setting. POP Designed to reduce the bass and treble which enhances the voice for news programs. Rock Enables extra bass and treble to enhance the movie experience.
Operation Audio menu SAP Broadcasts Setup - This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. - When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals. - Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
Operation Time menu Not all TV stations may provide time information for automatic time setting. If the date/time does not set automatically, switch to another TV station and wait and see if the time updates. Date /Time setting Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. Video Audio 1 2 3 Press the MENU button and then use / button to select the Time menu.
Operation Time menu Sleep Timer setting The sleep timer automatically shuts off the TV after a preset time (from 15 to 120 minutes). 1 2 3 Press the MENU button and then use Press the Press the button and then use button and then use / / Audio button to select the Time menu. button to select the SleepTimer. / Video button to select the number of minutes.
Operation Function menu Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Video Menu Language CC Mode On Audio Basic Caption CC1 Using Closed Captions Time English On Advanced Caption Service1 Captions are the subtitles of the dialogue and narration of television programs.
Operation Caption Style ( In DTV mode ) This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV`s digital captioning. Menu Language 1. Press the MENU button and then use / button to select the Function menu. 2. Press the button and then use / button to select Caption Style. 3. Press the button and then use / button to set style as Custom. 4. Use / button to customize the Style, Font, etc.
Operation Adjust menu Screen Setup for PC mode - When RGB connect to PC input and select the PC, this function is used. Adjustment for screen Position, Size, Phase, Reset - Display PC Adjust Menu by pressing INPUT button then use / button to select the PC item. Position : Adjust the screen position. Size : Adjust the screen size. Phase : Adjust the phase of Pixel clock. Mode : there are two modes: Auto Sync and default 1 Press the MENU button and then use / button to select the Adjust menu.
Operation Lock Menu Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Operation Lock setup - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu. 1. Press the MENU button and then use Then, press the button. / The TV is set up with the initial password security default password is 9-4-4-3. button to select the LOCK menu. 0-0-0-0 and Video Password Audio Parental Lock Time Input Password: On Confirm Password: MPAA Rating Parental Guide A 2.
Operation Lock setup Parental Guide Parental Guide: Blocks any channels that you do not want to watch or that you do not want your children to watch. Note : The Parental control will automatically block certain categories that are more restrictive . For example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-Y, TV-Y7, TV-G, TV-PG, TV-14, and TV-MA).
Operation Brief Info. - Brief Info shows the present screen information. - Press the INFO button to show the Brief Info on the screen. - Press the INFO button or EXIT button to exit. Function: Show the present screen information. Press the INFO button or EXIT button to exit. A: Program title B: Program rating categories C: Video resolution D: Program name E: Additional information.
Operation Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, VCR, CABLE, DVD, SETBOX or AUDIO. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note The remote control might not be compatible with all DVD Players, VCRs and Cable boxes. Controller Operation To control a device using the Controller SELECT CH.LIST PIP FAV.
Operation Setting Up Your Remote Control Automatic Scan Programming the Controller SELECT CH.LIST PIP FAV.LIST SWAP AUDIO LIST AUDIO SWAP POSITION To automatic scan program the Controller: 1. Manually turn OFF the device you wish to power scan. (TV, VCR, DVD, STB, cable box or audio equipment). 2. Press SELECT key to choose the device you wish to program. While Press and holding OK key, press the SELECT key and device LED will be ON.
Operation Remote Control Codes TV NO. Brand 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 NO.
Operation Remote Control Codes VCR DVD NO.
Operation Remote Control Codes SETBOX NO. Brand 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 Realistic Ricoh Runco Samsung Sansui Sanyo Scott Sears Sharp Shintom Signature Signature 2000 Singer Sony STS Sylvania Symphonic Tandy Tashiko Tatung Teac Technics Teknika Toshiba Totevision Tivo Unitec Unitech Vector Research Video Concepts Wards 40 PLASMA TV NO.
Operation Remote Control Codes AUDIO Receiver/Tuner NO.
Operation Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2 .
Specifications 1366X768(Dot) 1024X768(Dot) 120V~ , 60Hz NTSC ATSC Clear QAM 75 ohm External Antenna Impedance Dimensen(WX D X H ) Unit::inches/mm (Including stand) HP42BB 45.3*15.4*33.7inches 1150*390*855 mm HP50B 55.1*20.3*40.9 inches 1400*515*1040 mm HP60B 66.1X22.1X43.3 inches 1 6 8 0 * 5 6 0 * 1 1 0 0m m 99.2/45 138.9/63.0 187.4/85 The specifications shown above may be changed without prior notice for quality improvement.
Troubleshooting Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input.
Warranty This Haier brand product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product with a new or re-manufactured equivalent at no change to the purchaser, for parts or labor for the periods set forth below: This warranty does not apply to the appearance of the product or the exterior of the product, which has been damaged or defaced, altered or modified in design o
