Operation Manual

Setting up the Refrigerator/Freezer Combo

Be sure to choose a flat and level setup location.

Use sturdy and fireproof supports to correct an

unevenness in the floor. Turning an appliance

foot clockwise raises the appliance, turning it

anticlockwise lowers the appliance.

Door adjustment

If the freezer compartment door is lower than that

of the refrigerator compartment, insert the wrench

in the groove of the left screw and turn it in the

direction of the arrow until both doors are the

same height.

Height difference

Height

difference

Wrench Left screw

Protect the setup location against direct sunlight

or heat sources.

If the freezer compartment door is lower than that

of the refrigerator compartment, insert the wrench

in the groove of the left screw and turn it in the

direction of the arrow until both doors are the

same height.

Height difference

Wrench

Right bolt

Avoid a damp setup location. Remove water and

dirt with a soft rag.

Be sure to leave at least 10 cm of space around

the appliance. When installing the appliance in an

enclosed area, leave at least 25 cm of space on

the sides and 5 cm on the top and back.

Spacing

English