Operation Manual

Dispenser operation

Choose crushed ice, refrigerated water or ice cubes. Slightly push a glass against the

ice/water lever as shown in the illustration.

(1) Dispensing crushed ice

Press the appropriate button so that the

indicator for crushed ice lights up.

Lightly press against the lever so that crushed

ice is supplied.

(2) Dispensing ice cubes

Press the appropriate button so that the

indicator for ice cubes lights up.

Lightly press against the lever so that ice cubes

are supplied.

(3) Dispensing refrigerated water

Press the appropriate button so that the

indicator for refrigerated water lights up.

Lightly press against the lever so that

refrigerated water is supplied.

Dispensing crushed ice

Even with the ice cube option selected, some crushed ice may be supplied simultaneously.

It is also possible that the crushed ice supply is mingled with a few ice cubes.

When crushed ice is frequently called for, it is normal for frost to build up around the outlet,

but it will eventually evaporate.

Keep the glass close to the dispenser to prevent ice from spilling.

Dispensing refrigerated water

Due to air in the water supply line, refrigerated water may not be available immediately after installation.

In this case, hold the dispenser lever pressed in for as long as two minutes to evacuate any remaining

air.

After that, the supplied water will become increasingly cooler.

Refrigerated water does not contain any ice cubes. If you want to lower the temperature of the

refrigerated water, add crushed ice or ice cubes to it.

Caution: Keep fingers and objects away from the dispenser.

In order to avoid the ice spill out of the cup, we suggest to use cup with width over

80mm when taking ice from the appliance.