User Manual Washing Machine HWF10BW1
Elements Thanks for purchasing a Haier Product Please read these in ons carefully before using this appliance. The ins ons contain important informa on which will help you get the best out of the appliance and ensure safe and proper installa on, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
Index ................................................................................................................................................. 3 re e ............................................................................................................................................... 5 .................................................................................................................................................8 e ............................... .........................
This appliance is not intended for use by persons (including children) with reduced physical, their safety. Children should be supervised to ensure that they do not play with the appliance. Make sure that the transport bolt is removed. Use a separate earthed socket for the power supply. Make sure that the plug is accessible. Hold the plug and not the electric cable when unplugging the power supply. Make sure that the fuses in the power circuit are rated for 15A.
During daily use of the appliance loose threads to prevent the items from being entangled. If necessary, put small items into a small bag or net electricity, and for safety. Wipe clean the lower part of the porthole. odors. Use the hose-set supplied with the appliance.Old hose-sets should not be reused. Do not touch the washer door during the washing process, it gets hot. Do not place heavy objects or sources of heat or damp on top of the appliance. Do not hot wash from rubber or sponge-like materials.
Before Use Before Use Descrip on This diagram may be slightly different from the layout of the washing machine you have just purchased. Drain hose Control panel Water inlet valve Door handle Power cord Work top Back cover screws Start/Pause Back cover Washer door Filter cover S1 T4 T3 S4 S2 T2 T1 S3 Preparing the machine Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may bee seen on the bag and the porthole.
Before Use In on Dismantle the transport on bolts The transpo on bolts are designed for clamping an vib on components inside of the washing machine 1. Remove the back cover. 2. Remove the four bolts on the rear side and take out 3. the back cover. 4. Fill the holes le by the bolts with blanking plugs. Note: the back cover, the convex must face to outside, and you have to insert the back cover from the two gaps as shown in fig.5. Keep the transporta on bo zers in a safe place for later use.
Inlet Hose Connect the nut on the inlet hose to the connector on the water valve. Connect inlet hose to a water tap with cold, fresh water. Use the hose-set supplied with the appliance. Old hose-sets should not be reused. Drain Hose Use the drain hose bracket to keep the end of the drain hose retained and prevent the of water. Don't extend the length of the drain hose; if an extended hose is required, please consult a serviceman or plumber.
ons Control Panel 10 1400 1200 1000 800 4 5 6 7 8 9 1 6. 7. Extra Rinse 8. Delay 9. 10. LED Display 1. 2. 3. Program Dial 4. Wash Temp 5. Spin Speed Oper onal Func ons Nº Func on 1 Detergent drawer 2 3 Explica on Open the drawer, three compartments can be seen: Compartmen 1:Water inlet only. Compartment 2:Det ergent for programs 1 to 15(see P10). 2 1 for the various washing temperatures, please refer to the manual of detergent.
7 Extra Rinse disappears when the extra rinse ends. 8 Delay programs 1-15 are used. Press press The default delay time is longer than the program time , and the delay time will be increased by 30 minutes every time you press the delay button. 9 Start/Pause 10 LED Display When the washing machine is connected to the power socket and a press press Press press screen start blinking, press the Power switch, the program will be cancelled. accordingly.
ons Program Modes 1 Water inlet only, no detergent. 2 1 P rogram Temp.
Program Max. Load Default Temp.
Washing Methods the machine is use for commercial purpose the guarantee will not be valid anymore. Do not use it for purposes other than that for which on the label of each garment and wash only machine-washable garments. Power Supply Connect the washing machine to the power supply (220V to 240V~/50Hz). Turn on the tap. The water must be clean and clear. Before use, check for leaks in the joints between the tap and the inlet hose by turning on the tap.
ons Loading the appliance Open the washer door put in the laundry piece by piece. Close the door ghtly. W 60℃, this will clean the drum and hoses before your first load. Do not overload the washing machine. Note the different maximum load according to programs. Rule of thumb for maximum load: Keep six inches(approximately 15 cm) between load and drum top. Close the door carefully, making sure that there are no garments caught between the gasket and the door.
ons Sele ng program 1400 1200 To get the best washing results, an appropriate washing program should be selected according to the laundry type. Please turn the program knob to select the right program. 1000 800 Sele ng fun on Select the required op ons. (Refer to the "Control panel" pages 8,9 and 10) Se ng washing temperature Press and hold down the temperature bu on un he desired temperature is selected. Se ng spin speed Press and hold down the speed bu on un e desired speed is selected.
Care Chart Machine Wash, COLD Machine Wash, WARM Machine Wash, HOT Machine Wash,COLD Permanent Press Machine Wash,WARM Permanent Press Machine Wash,HOT Permanent Press Machine Wash,COLD Gentle Cycle Machine Wash,WARM Gentle Cycle Machine Wash,HOT Gentle Cycle Hand Wash Tumble Dry,NO HEAT Do Not Wash Tumble Dry,LOW HEAT Do Not Tumble Dry Line Dry Bleach as needed Any bleach, like Clorox® , may be safely used Tumble Dry,MEDIUM Drip Dry Tumble Dry,HIGH Dry Flat Non-chlorine Bleach as needed Use onl
Maintenance Cleaning and Care A er washing Turn o the water supply and remove the electrical hine and replace the drain hose. Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly : 1. 2. Press 3. the appliance. insert the drawer back in Cleaning the machine Unplug the machine during cleaning and maintenance. Use a so cloth dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.
Maintenance r Water inlet valve and inlet valve To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve regularly. Moving the machine Remove the back cover. Remove the blanking plugs. Insert the plastic stabilizers and the transportation bolts. Tighten the bolts with a spanner. Replace the back cover. Long periods of disuse If the appliance is left idle for a longer period, pull out the electrical plug and turn off water supply.
Maintenance F7 E8 FA FC1 FC2 End Motor Error. between Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel. Contact the maintenance personnel. between Contact the maintenance personnel. Water level sensor error. display board and inverter. display board and power board. End of wash cycle. 19:30 1:25 UNb 1.
Trouble-Shoo ng Trouble-Sho Problem Washing machine fails to operate. Washing machine c with water. Machine is draining while being Drainage failure. Causes Solu ons Power failure. The washer door is not properly closed. Machine has not been switched on. Check the power supply. Close the washer door properly. Make sure the machine is switched on. Water tap is not turned on. Water pressure is less than 0.03 MPa. The inlet hose is kinked. Water supply failure. roperly set.
Technical data Basic technical informa on regarding the appliance. HWF10BW1 Power source Max. working current (A) Water pressure (MPa) Nominal load (kg) Max. spinning speed (rpm) Washing programs Max. power (W) Dimensions (HxDxW mm) Net weight (kg) 220 - 240V~/50Hz 10 1 10.
not solved. Please check the Warranty Card included in the product.
0020507792AN
