User Manual Washing Machine DIRECT MOTION 10kg Delay Speed Up Temp Spin Speed Start/Pause HWF10DW1
3 Index Thank you for purchasing a Haier product Safety............................................................................................................ 4-5 Please read these instructions carefully before using this appliance. It contains important information which will help you get the best out of your appliance and ensure safe and proper installation, use, care and cleaning. Keep this manual in a convenient place so you can always refer to it for safe and proper use.
Safety 4 This appliance is in tended to be used in household and similar applications such as: ... staff ki tchen areas in shops, offices and other working environments; ... farm houses; ... by clients in ho tels, mo tels and other residential type e nvironments; ... bed and breakfast type environments; ... a reas for communal use in blocks of flats or in launde rettes; ... max. capacity 10 kg,water pressure 0.03-1MPa. Before switching on the appliance for the first time... ...
Installation 6 Preparation Remove all packaging material including polystyrene base. While opening the package, water drops may be seen on plastic bag and porthol e. This is normal as a result from water tests and quality control in the factory. Note: Packaging disposal: Keep all packaging material out of children’s reach and dispose them in an environmentally friendly manner. Installing bottom plate 1. Lay the washing machine down to its side, window upwards, bottom side towards operator.
Production description DIRECT MOTION 8 Control panel 9 10kg DIRECT MOTION Delay Speed Up Temp Spin Speed 10kg Start/Pause Delay Speed Up Temp Spin Speed Start/Pause (a-g) S5 S6 1. Detergent/Softener drawer 2. Display 3. programme selector 4. “On/Off” button 5. Function but tons (a-g) a. Delay b. Speed up c. Temperature d. Spin Speed e. Extra Rinse f. Water Level g. Start/Pause This drawing may be slightly different from the layout of the washing machine you have just purchased.
Control panel-function but tons 10 11 Control panel- Display symbols “Water Level” (button f) To get best results in each programme Haier has well defined specific default settings. If there is no special requirement default settings are recommended. According to these factory settings many programme parameters and additional functions could be individually changed. “Delay”-Start time delay (Button a) Touch it to increase programme end time in increments of 30 minutes at most 24hr.
Programmes 12 Programme table The indicated consumption values may differ in local conditions. Programme 1. Washing powder compartment Consumption 13 Max load kg Rinse Times Water L Temp Washing Spin drying time performance h:min % 2. Detergent compartment 1. Cotton 10 2 L-1 30 Auto 3. Softener compartment 2. Eco 10 2 L-1 30 Auto 3. Towels 5 2 L-1 60 1:36 4. Duvet 3 2 L-1 40 1:07 5. Allergy 5 3 L-1 60 1:51 6. Rinse 5 2 L-1 7. Spin 10 0 8.
Daily use 14 This appliance is only for domestic use inside the house. If it is used for commercial, industrial or not intended purposes any Haier guarantee will not be valid anymore. Consider instructions on each garment label and wash only machine-washable laundr y. Power supply Connect the washing machine to the power supply (220V to 240V/50Hz). Water connection Turn on the tap. The water must be clean and clea r.
Daily use 16 Add individual selections Select required options and settings refer to “Control panel”. Delay Speed Up Temp Spin Speed Start/Pause Start wash programme Touch “Start/ Pause” button to start. Appliance operates according to selected settings. Changes are only possible by cancelling wash programme. Geeneral information and tips: 1. For safety reasons the door is locked partially during the washing cycle.
Care and cleaning 18 19 Care and cleaning Cleaning the detergent drawer Pump filter Clean the drawer from detergent residues regularly. Pull out the drawer until it stops (1) and press the release button (2) to remove the drawer. Then flush the drawer with water until it is clean and insert the drawer back in the appliance. Clean the fil ter once a month and check the pump filter immediately if the appliance: doesn´t drain the water.
Care and cleaning 20 Troubleshooting 21 Display code Water inlet valve and inlet valve filter Cause Solution Auto Automatic load detection Laundry weight detection in process. please wait until p rogram cycle time is displayed. Unplug the power cord and turn off the water supply. 1:25 Remaining wash cycle time. 19:30 Remaining delay end time Likely showing the delay end operation. Unscrew the water inlet hose at the back of the appliance as well as on the tap.
Troubleshooting 22 In case of power failure Problem The current programme and its setting will be saved. When power supply is restored, operation will be resumed. If a power failure cuts an operating wash programme door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door. - Danger of burns! Water level has to be lowered as described in “Pump filter”.
Technical data 24 Basic technical information regarding the appliance Power source 220-240V/50Hz 10 Max. working current (A) Water pressure (MPa) Nominal load ( kg) Max spinning speed (rpm) Washing programmes Max. power (W) Dimensions (HxDxW mm) 0.03 P 1 10 1400 16 2000 850x600x595 Net. weight (kg) 74 Power consumption of the off-mode (W) 0.2 Power consumption of the left-on mode (W) 0.
