Fuzzy Computerized Automatic Washing Machine User's manual This manual is for HWM-6.5/S Please read this manual carefully before using. Retain it for future reference.
Contents Names of the parts................................................................................................1 Safety precautions ............................................................................................. 2 Installation and adjustment ...................................................................................4 Preparation before washing .................................................................................8 Put in the laundries ............................
Names of the parts Top lid A Water absorption cushion Top lid B Detergent box Water valve Cabinet handle Lint filter(Installed by user) Drain hose Lint filterA(Installed by user) Control panel Filter cover Power line Inner tub Pulsator Control panel film Cabinet Adjustable foot back cover base frame fixed foot (3) Meaning and description of the symbols Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phasethree pins receptacle. Ensure the earthing prong of the power receptacle is earth edreliably. Use leakage protector if possible. The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle, when moving the machine, or when cleaning the machine.
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) l Petro The handicapped or children without care shall not use the machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently.
How to change the direction of the drain hose 3 1 protrude the drain hose from the hole on the right side of the bottom, and fast it onto the bottom with the rack and screws. Set the bracket on the drain hose .There is a hole on the cabinet to hang the drain hose (as figure 3). Dismount the back cover of the washing machine. Figure 3 drain hose rack Figure 1 4 install the back cover as what it looks before. 2 Take off the drain hose frame. Put down the drain hose. Take off the drain hose rack.
Install the water inlet hose 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE: Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve .
Check the connection between the water inlet hose and the water tap 1.Swaying the hose gently to confirm if it is fastened stable. 2.After installation, open the tap to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the water inlet hose and the water tap is firm, so as to prevent dropping from improve Installation position. Take down the water inlet hose 1.After using,Close the water tap. 2.
Preparation before washing Preparation before washing 1. Connect the water inlet hose. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3. Hang up the drain hose. 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally.
Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.0kg. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing.
Use the operation buttons a. Description of the function of the buttons "PROCEDURE"button With it you can select one or several processes of soak, wash, rinse and spin. STANDARD JEANS GENTLE QUICK WASH WATER LEVEL SELECTION PROGRAM SELECTION SOAK WASH RINSE SPIN PROCEDURE SELECTION " WATER LEVEL"button The user selects a suitable water level depending on the load.
SURPLUS(MIN) "START/PAUSE"button To indicate -- during sensing. To indicate remaining min. During program running. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 16) Page 16 After the power is switched on, press it to start the machine During working, push it to pause working. During pause, push this button to restart and continue operation. "POWER ON/OFF"button Press "Power On/Off" button to connect power supply.
b.Operating procedure and explanations for the buttons WATER LEVEL SELECTION PROGRAM SELECTION SOAK WASH RINSE SPIN PROCEDURE SELECTION RESERVE HOURS LATER STANDARD JEANS GENTLE QUICK WASH SURPLUS MIN RESERVATION CALEFACTION START PAUSE POWER ON/OFF 1 Press the "POWER ON/OFF" button to switch on the power supply After switching on, the washing machine heating function will be automatically set inactive.
3 Press the button of "PROCEDURE SELECTION" to select suitable processes. PROCEDURE SELECTION After the power is switched on, the washing machine will automatically set a normal program comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the paragraph "Processes selecting". Page 10 Attention Even there's no water in the tub, the spinning will start after a certain period.
4 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL SELECTION After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 5 Push the " RESERVATION/CALEFACTION" RESERV ATION CALEFACTION button to select suitable reserv e progra m After switching on, the washing machine reserved wash program will be automatically set i nactive.
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using. Install Dismantle 1. Pull upward to dismantle lint filter. 2. Push downward to install lint filter. Dismantle Clean 3. Please clean lint filter after wash.
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do notrepair it by yourself.
Packing list Name Quantity User's manual One piece Warranty card One piece Water inlet hose The side of connection between the water inlet hose and the washing machine One piece The side of connection between the jointer of the water inlet hose and the water faucet Lint filter Two pieces Lint filter A Two pieces Bottom plate One piece Tapping screws Eigh piecest Fuzzy computerized automatic washing machine One set Specification Water level/Water quantity (about) Water inlet pressure 0.
