Haier Washing Machine HWM90DD
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire, electric shock, or injury when using your appliance, follow basic precautions,including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this user and care guide. 3. Use only detergents or softeners recommended for use in this appliance and keep them out of the reach of children. 4.
16. Do not use this appliance for commercial clothes washing. 17. Do not operate this appliance unless all enclosure panels are properly in place. 18. Do not tamper with controls. 19. The appliance is not instruct for use of young children of infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. 20. This appliance must be connected to a proper electrical outlet with the correct electrical supply. 21.
TABLE OF CONTENTS PAGE IMPORTANT SAFETY INSTRUCTIONS.................. 1-2 OPERATING INSTRUCTIONS . .............................. 4 Parts and Features.................................................. Operations. ............................................................ Normal Operating Sounds........................................ Lint Filter .............................................................. Install the linner cover .....................................................
OPERATING INSTRUCTIONS Parts and Features Hand Wash Soak Stain Wash Hot/Cold Normal Quick wash Wash Heavy Warm/Cold Whites Delicate Casual Rinse Medium Cold/Cold Colors Wrinkle Control Spin Heavy Duty Delay Time Light Estimated Time Cycles Process Extra Rinse 1 Wash Speed Spin Speed Delay Water Level 6 Soil Level Signal Start Pause Warm/Warm Wash/Rinse Power On/Off Temp 7 8 2 3 9 10 11 12 13 14 4 15 16 5 1 Top lid 7 Door switch 2 Control panel 8 Bleach inject
Operations Heavy Duty Hand Wash Soak Stain Wash Hot/Cold Normal Quick Wash Wash Heavy Warm/Cold Whites Delicate Casual Rinse Colors Wrinkle Control Spin Medium Delay Time Estimated Time Light Cold/Cold Start Pause Warm/Warm Wash/Rinse Power Cycles Process Extra Rinse Wash Speed Spin Speed Delay Water Level Signal Soil Level Temp On/Off Delay When not activated, the display shows cycle remaining time through the wash process.
Water level indicator will shut off if only Spin is selected. Extra Rinse Once a program is selected, press this button to have a extra rinse.The washer will add a extra rinse. Wash Speed/Spin Speed For selecting the speed of washing or spinning . Water level Water levels may be set at the beginning of the wash or at pause. During Soak, Wash or Rinse press this button to manually replenish water. Release to stop. Function automatically is inactive when water reaches the overflow protection level.
Indicates remaining hours during delay process. Indicates fault codes or conditions that are not normal. Loading the Washer: Load each item loosely. Separate the white and colored clothes.Separate heavy clothes from light clothes. Carefully check all pockets and cuffs for small items. They can easily slide in to the tub and may damage the tub. Pre-treat all stains and heavily soiled areas for best results. Do not overload your washer.
Note:Use only liquid bleach in dispenser. Warning: Be careful not to spill undiluted bleach on the washer cabinet or your clothes.As it is a storng chemical,it maydamage some of your clothes or the finish of the washer if not properly diluted. Use the manufacturer s chart,on product container for recommended use of liquid or powder bleach. Softener inlet SOFTENER Softener inlet Please follow softener instructions for dose usage.
Lint Filter The lint filter must be used during washing. It must be cleaned after each wash. Install 1 Take off the lint filter. 2 Clean out the lint in the filter. 3 Install the lint filter. Take off Take off Install the inner cover Install (To prevent water spillage from tub) 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, lining up the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove. 3.
CARE AND CLEANING GUIDE Warning: Always unplug your washer to avoid electric shock before cleaning. Ignoring this warning may result in injury. Before using cleaning products, always read and follow manufacturer warnings to avoid personal Injury or product damage. Cleaning and Maintenance Use only damp or sudsy cloth for cleaning control panel. To avoid any kind of damage to cabinet finish, wipe washer cabinet as needed.
Storage of Your Washer The washer must be stored at room temperature. If you just got delivery of a washer when outside temperature is below freezing,do not operate until washer has warmed to room temperature. Do not install or operate your washer where room temperature is below freezing.
TROUBLE SHOOTING Washer does not operate: Check if unit is plugged in. The plug may have come loose. Check if the electrical wall receptacle is of proper voltage. Check if the circuit breaker needs to be reset or if the fuse need to be replaced. Check if the washer is overloaded :load may need to be re-balanced and clothes may need to be redistributed. Check if the lid is open. You may have to close the lid properly. The washer pauses in some cycles.
Washer load may need to be re-balanced, as the load may be uneven. Coins, loose change, buttons or other heavy objects could make noise(read Operating Guide-Normal Operating Sounds). Squealing sound: Due to overloaded wash tub. Vibration Noise: Due to not leveling washer properly on the floor and uneven distribution of clothes in the tub. Problems with clothes: Clothes are too wrinkled: this is due to improper sorting, overloading and washing in too hot water repeatedly.
INSTALLATION INSTRUCTIONS Tools and Materials Required You will need to have following tools to help you with the installation of your washer: Pliers Wrench Tape Measure Gloves Level Accessories Supplied Quantity 4.Inner Tub Cover 2 1 1 1 5.Outer Drain Hose 1 1.Hot & Cold inlet hoses 2.Drain Hose Hook 3.
Unpacking Your Washer Remove all packing materials. This Includes the foam base and all . adhesive tape holding the washer accessories inside and outside Open the top lid to remove the styrofoam drum brace. Pull to remove. Before using this washing machine, please remove this shipping bar by pulling handle and dispose it properly, otherwise the washing machine will be damaged. Pull out Leveling Your Washer Shipping bar Your washer has 4 leveling legs; which are located on the bottom corners.
Steps for Installation Select a away suitable location for the washer on a hard even surface from direct sunlight or heat source e.g. radiators, base board heaters, cooking appliances etc.Any floor unevenness should be corrected with the leveling legs located on the bottom corners of the washer.The washer must be placed at room temperature.You must not place washer where the temperature is at below freezing. Installing Your Washer: Read through these instructions carefully before installation. 1.
4. Install the drain hose to the side of the washer using the drain hose damp provided. The drain hose must be placed into a drain pipe or sink at least 1 1/2inches in diameter. Use the goose neck to the hose in place. To avoid possible water back up, the drain hose must reach a minimum height of 1000mm and a maximum height of 1500mm. Water Inlet Water Supply Hose Goose Neck Hose Bend Drain Hose 5.Plug the washer into a regular 220-240Volt/50Hz,10Amps outlet.
ELECTRICAL REQUIREMENTS Grounding Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounded plug. The plug must be inserted into an outlet that is properly installed and grounded. Improper use of the plug can result in a risk of electric shock.
SPECIFICATION Rated voltage frequency 220-240V~ Rated washing / spinning capacity 9.0kg Spin speed max 700rpm 50Hz Water level/Water quantity (about L) 1/28 2/36 3/49 4/54 5/61 6/67 7/73 8/79 9/89 10/95 Max water consumption About 122L(Normal program) Injection pressure 0.03MPa-1.
