TOP LOAD FULL-AUTOMATIC WASHING MACHINE USER’S MANUAL MODEL HWT07AN1 HWT08AN1 HWT09AN1 HWT10AN1 Please read this manual carefully before operating your washing machine and retain it for future reference.
CONTENTS Product overview Safety precautions 1 2 Description of symbols Safety Safety warnings 2 2 2 Installation & adjustment Installing the bottom plate Balancing the washing machine Installation of the drain hose Installation of water inlet hoses Before washing Check the following before washing Operation Loading your laundry Loading detergent Explanation of the display 4 4 5 5 6 7 7 8 8 8 9 Operation and Wash Cycles 13 Cleaning and Maintenance 15 Trouble-shooting 16 17 18 Packing list
Product overview Top lid Detergent tray Outer tub cover Top deck Cabinet Inner tub Pulsator Screw cover Base frame Adjustable feet (2 pieces) Control panel Cold water inlet valve Hot water inlet valve Hook Handle Power cord Back cover Drain hose connector Fixed feet (2 pieces) Drain pump filter cap (Not to be removed by the customer) Please understand the shapes of the washing machine and accessories may be different from the sketch figures in this manual due to product improvement.
Safety precautions Description of symbols Contents marked with this symbol are related to the safe use of the product and the personal safety of the user. Warning sign Please operate in accordance with the contents of this manual to avoid harm to the user or damage to the machine. Forbidden sign Contents marked with this symbol indicate operations or actions that should not be undertaken by the user.
Safety precautions Forbidden Do not install this appliance in a damp or wet environment. Do not leave wet laundry on the Control Panel or spray water directly onto this appliance as this may cause the washer to malfunction or cause an electrical fault. Do not connect to hot water higer than 60°C temperature. If you are using an extension cord or a portable electrical outlet device (not recommended), ensure that it is positioned so that it does not come into contact with water or moisture.
Safety precautions If power cord or other parts of this machine become damaged or faulty, please contact a technician to have it repaired.. Do not attempt repairs by yourself as this may cause personal harm or void warranty. The new hose-sets supplied with the appliance are to be used and the old hose-sets should not be reused. Please do not to remove the pump filter cap situated at the bottom rear of the product in any situation as water remaining in the product will flow directly out of the product.
Installation & Adjustment Balancing the washing machine Installation on an uneven surface can lead to ‘out of balance’ events, instability in the machine operation, or even failure to successfully complete a wash cycle. Please refer to the following methods for adjustment: 1.Confirm whether the machine is level. 2. Lift the lid and ensure that the bowl is central to the top deck opening. Adjust the two front leveling feet as necessary.
Installation & Adjustment Water inlet 1. Connect the cold hose (blue connector) to the cold tap and the hot hose (red connector) to the hot tap. You may have to use pliers to tighten the coupling. Do not over tighten as this may cause damage to the valve or hose fittings. 2. Connect the other end of the hose to the respective hot and cold inlet valves, located at the rear of the washing machine. 3. We recommend replacing the inlet hoses every 5 years.
Before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Insert the power plug into the wall power socket. 3.Ensure the drain hose is mounted at the correct height. 4.When the water pressure in the user's home is too low, it may not be able to wash detergents and softeners 0.8m H 1.2m effectively (which may agglomerate). 5.Please clean the detergent box when required to maintain a clean surface.
Operation Loading your laundry The rated washing capacity refers to the largest dry weight of a load that can be washed. The thickness, size and type of clothes will influence the actual capacity. Do not select more than water level “Mid” for clothes less than 2.0kg, to avoid splashing of water. It is recommended that low suds/high efficiency washing powder is used. Before washing, please make sure that the water level covers the clothes. Adjust the number of clothes according to the actual situation.
Operation Explanation of buttons Auto (Long)High Favorite High Hot Extra Med Med Warm Normal (Short)Low Soiled + Rinse Low Cold ECO No Spin Soak Wash Spin Power Water Level Water Temp Rinse Spin (Speed) Options Mix Cotton Eco Express 30 Progress Delay Delicate Towels Wool Sheets Synthetic Hygiene Drum clean Start/ Pause Bulky J K Indicator display Off On: Indicates the program is running and indcates the selected cycle and options Flashing: When paused, indicates th
Operation Digital display During the wash cycle, the digital display will show the time remaining in minutes. Page 16 If an issue occurs, the display will show a user warning or error code (see to page 16) If a ‘Delay start’ is selected, the display will show the total time to cycle completion including the delay period, in hours A "Power" button Push the " Power " button to switch on the power. Power Under power-on mode, push it to switch off the power.
Operation B "Water Level" button Water level Press the water level button to select the water level you want to set. When there is water or wet clothing in the tub, it can't automatically detect the cloth quantity. All cycles except Express cycle defaults to show “med” water level, the Express cycle will show “Low” water level. All of the cycles except Drum Clean cycle defaults to show “Auto” water level, you can choose other water level manually. The Drum Clean cycle defaults to show “High” water level.
Operation F "Options" button Options Soak This cycle consists of a ½ agitate time then complete 2hr soak (with interm-ittent agitates during soak) , After soak period, continue with the second ½ of agitate phase. Soak is available on all cycles except Wool and Express cycles. Soiled+ This cycle consists a 15 minute soak sequence ½ way through agitate time. Increase agitate time by 30%, which is added to the second half of the agitate time.
Operation and Wash Cycles 1 Press the button to switch power on/off 2 Turn the knob to select automatic program After the power is turned on, the default is Mixed program. Then rotate the knob to select other programs. For example, when you want to wash light dirty clothes quickly , use a Express procedure. 3 Press the button to change the water level All of the cycles except Drum clean have fuzzy function and the water level can be adjusted according to the texture and quantity of clothing.
Operation and Wash Cycles 6 Press the button to select the delay wash program When the power is turned on, the washing machine Delay procedure is automatically set to non-startup state. The laundry process will begin immediately after pressing the Start/Pause button. Operating Method of Delay Procedure Before setting the appointment time, first set up the program and other options, and then press the Delay button. The program LED will be turned off and the reservation indicator will be turned on.
Cleaning and Maintenance Maintenance Remove the power plug before carrying out any cleaning or maintenance. Clean the lint filter(s) and detergent box after each wash, otherwise it may influence you using the machine. Clean the detergent box and set it on the Both lint filters must be used during washing. control panel seat. 1.The method of dismantling: Tilt upward Must be cleaned after each use. Remove and reinstall the lint filter as pull out and gently. follows: 2.
Trouble-shooting If there is a fault or the machine does not operate correctly, remove the power plug before checking the machine. Using diagnostic list below, please check if the machine requires a repair. If a repair is required, please contact our customer care team, do not try to fix it by yourself. Problem Possible causes What to do The machine does not drain or drain slowly. The display shows E1. Is the drain hose blocked? Remove the blockage. Push the Start/Pause button once.
Trouble-shooting Problem Possible causes What to do The display shows FA The water level sensor has failed. Please contact Customer Care. The display shows F2. Overflow Error Please contact Customer Care. The display shows E2-1. The door lock alarm Please contact Customer Care. The display shows FC1. Communication failure between display board and motor driver. Communication failure between display board and Power board. Communication failure between display board and load board.
Specification Type TOP LOAD FULL-AUTOMATIC WASHING MACHINE Model HWT07AN1 HWT10AN1 Rated voltage/frequency 220-240V/50Hz 220-240V/50Hz Rated washing power 400W 350W Rated spinning power 370W 300W Net weight 40kg 49kg Gross weight 45kg 55kg Dimensions(mm) W 550 D 570 H 1000 W 610 D 620 H 1045 Water inlet pressure 0.03MPa-1.0MPa 0.03MPa-1.