Haler ° TFT-LCD TV OWN E R'S MAN UAL Please READ this manual carefully before operating yourTV, and retain itfor future re f e re n c e iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii,,, iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ HL42XR1 HL32R1 HL26R1 HL42XK1 HL32K1 HL26K1 HL32XK1
Warning The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Instructions SAY T Thank you for purchasing the Haier product. product. Remember torecord the modeland TRUCTIO This easy-to-use manual will guide you in getting the best use of your serial number. Theyare on label in back ofthe unit. Model number serial number Date of purchase Staple 4 your receipt to your manual. You will need it to obtain TV LCD-TFT warranty service.
Introduction Contents Video Menu Warning .......................................... 2 How to selectpicture mode .................................. Safety Instructions ............................ 3 How to customizeyour own picturestatus ............. introduction VGA Set ..................................... Co nt ro Is ......................................... 6 Audio Menu Connection Options .............................. 7 How to selectaudio mode .....................................
Introduction Controls / s sas np fed represe TV Side taro of e pa_se/c©nt_"els /Vfro and t pa e sdepa e co fro butte sa dsde puts cen_'_ectiens /- H L26R 1/H Lg2R 1/H L42XR 1 ............ I ,![! ® _ ® r _ ® @ '_) 8 _../ /% -- ..................... (_) ii g- '_.j °<__ r- + \l 2 Fs o ,¢_ O @ , ..................... (_)
Introduction Connection Options ® ® ©L '\ / I DVl AUDIO © © Y Pb fh ,\ j, ® L-AUDIO-R Pr VGA AUDIO VGA © L-AUDIO -R S-VIDEO L-AUDIO-R L-AUDIO -R i J ©® ® @@ @ @ 1. Digital Audio Output: Connect vat ous types ef d@tat asdo equipment NOTE: In standby mode, these ports will not work. 2. DVi Audio In: Whet/ s '/(_ _/©Y:/to H©F_ _sdapter;connect the {_ud o si{_n_sto these iacks 3. Antenna Input: Connect cable or antenna signals to the TV, either directly or through your cable box.
Introduction Universal The remote When using Function O control cannot the remote control, introduction (_) .................... Q ...................... AUDIO PC HDMI ......................... • @ Q ................... Q .............. $::: c:p o control be operated .......... PICTURE (_ Remote unless aim it atthe the batteries remote sensor are properly loaded. on the TV. 1 .POWER Press to turnon and off the TV. 2.
Installation Accessories .
Installation External Equipment NOTE: All cables shownare Choose not includedwith Connections theTV. Your Connection There are several ways to connect your television, depending on the components you wantto connectand the quality of the signal you want to achieve. The following are examplesof some different ways toconnect your TVwith differentinput sources. Connecting Toavoid distance aVCR picture noise(interference), between theVCR andTV.
nstaltation Externa| External Equipment A/V Source Connections Setup How to connect Connect the audio and video cables from the external equipment's output jacks to the TVinput jacks, as shown in the figure. When connecting the TVto external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the INPUT button on the remote control. 2. PressA/V button to select the desired source. 3. Press ENTER button to confirm.
Installation Externa| Equipment Connecting a DTV(digital Connections TV) This TV can receive Digital Over-the-air/Cable signals withoutan external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p, 1080i).
Installation Connecting a computer Howtoconnect 1. To getthe bestpicture quality, adjustthe VGAgraphics card to 1024x768. 2. Usethe TV'sVGAor DVI (Digital Visual lnterface)Audio IN port foraudio connections, depending on your computer connector. II If the graphic card on the computer does not output analog and digital RGBsimultaneousty, connect only one of either VGAIN or HDMI IN todisplay the VGAon theTV.
Installation Externa| HDMI Equipment Connections and DVI input When the source device(DVD player or SetTop Box) supports HDMI How To Connect 1. Connect thesource device toHDMI portof thisTV 2. No separated audio connection is necessary. withan HDMI cable(notsupplied with thisproduct). How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
Installation Cable sample o. \\\\ \ HDMI Cable (not supplied withthe product HDMI to DVl Cable (not supplied withthe product Analog Audio Cable (Stereo to RCA type) (not supplied withthe product Owner's Manual 15
Installation Connecting Headphones You can connecta set of headphones to your set if you wish to watch TV programme withoutdisturbing the otherpeople in theroom. t Power Plug a setof headphones intothe 3.5mm mini-jack socket onthe side panetof the set. source Wider Hole and Blade Polarized 16 a TV LCD-TFT AC Outlet AC Cord TOUSEAC POWERSOURCE Use theAC polarized line cord provided for operation onAC. Insert theAC cordptug into a standard potarizedAC outlet.
Installation Removing the table stand and installing wall mount bracket a HL26R1 Remove 4X M4 screws securing the stand to the TV, then remove the stand. Use 4X M6 screws to secure the wall bracket (not supplied)to the backof yourTV. HL32R1 Remove 6X M4 screws securing the stand to the TV, then remove the stand. Use 4X M6 screws to secure the wall bracket (not supplied)to the backof yourTV. HL42XR1 Remove 5X M4 screws securing the stand to the TV, then remove the stand.
Operation Operation In the manual, the OSD (on screen display) may be different fromyour TV's, because it is just an exampleto help you with theTV operation. There are several options you might need to set up in order for yourTVtoworkproperly. Read the instructions that follow. Initial Setup: Set according to the screen display. Switching On/Off 1. First, connect the TV set power cord correctly. 2. Select the viewing the remote control. 3.
Operation Channe| menu II This TV set has two methods to set channels, which are respectively Channel Scan, Channel Skip. II In this section, how to use the remote control channel is explained. set channel. to set You can also use buttons on the TV to Note The Channel menu will beontyoperated Channel in normaITVmode. _ Scan Video j_-:}>)Audio 1. Press MENU button Channel and then use A/Y button to select Tuner Antenna 4b Channel Scan [_Db Channel Skip [_Db O. menu. 2.
Operation Select the desired 1. Using CH+/- buttons. II Press CH+ button to select program a channel number increasing direction. II Press CH- button to select a channel number Note decreasing number in number in direction. If skip is ON on one channel, press CH+/- button, the channel will not appear. 2. Also can enter channel number directly, eg:2-0. Select the desired Press VOL-/+ buttons sound on the remoteor the front of the TV set to adjust the volume level. The range is 0-100.
Operation Video menu The TV menu gives you an overview of the menus you can select. Note Depending on the input signal, one or more menu items may not be selectabte. How to select The picture Standard, picture mode provides Vivid, Custom mode the pre-defined 1. Press MENU button and then use A/Y Video button to select button to _ Mode. the option You can also press PICTURE button on the remote to selectthe option Standard, How to customize status 1.
Operation Video menu ill Color temperature This wilt increase ordecrease Warm(red) and Coot (blue) colors to suitpersonal preferences. Select Cool togive the white colors a bluetint, Standard to give the white colors a neutral tint, Warm togive the white colors ared tint. Ii Advanced Video To adjustthe picture in advanced DNR, Black Level Extender, White PeakLimiter, CTI, FlechTone, Adaptive Luma Control.
Operation Audio menu How to select audio mode 1. Press MENU button and then use A / Y button to setect Audio menu. 2. Press_or ENTER button and then use A/Y button to select Mode. 3. Pressi_ or ENTER button to selectthe option Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church. You can also pressAUDIO button on the remote control to select theAudio Mode Off, Concert, Living Room, Halt, Bathroom, Cave, Arena and Church.
Operation Function Menu menu Language When you start using your set for the first time, you must select the language and indications. which will be used fordisplaying ,:__, Audio 1. Press MENU button and then use A/Y Function select button to select _,_{_ Channel menu. 2. Pressl_or ENTER button and then use A/Y button to Language. i:'_i' Lock 3. Press < / _ button to select (:English, Spanish Video menus language.
Operation Function menu [] Wide Choose wide whenyou want toadjust the picture horizontally, in a linear proportion to fill the entire screen. [] Cinema For letterboxpictures, bars may appear on the top and bottom on some programs. You can also pressARC button on theremote control to select the desired pictureformat: Normal, Zoom, Wide or Cinema. Blue Screen 1. Press MENU button and then use A/V button to select Function menu. 2. Pressl_or ENTER button and then use A/Y button to select Blue Screen. 3.
Operation Function menu Sleep setting Timer The sleep timer automatically shuts off the TV after a preset time (from 5 to 240 minutes). 1. Press MENU button and then use A/V button to select Function menu. 2.Pressl_or ENTER button and then use A/Y button to select Time Setup 3. Pressl_ or ENTER button and then use A/Y button to select Sleep Timer. 4. Press4/l_ button to select the number of minutes. Select Off,5Min,lOMin, 15Min, 30Min,45Min,60Min, 90Min, 120Min, 180Minor240Min.
Operation Lock Parental Menu Control can be used to block specific channels, ratings and otherviewing sources. The parental control function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. Parental Control rating and categories Rating guidelines are provided by broadcasting stations.
Operation Lock Menu Lock setup Set up blockingschemes and external viewing A password to btockspecFic channels, ratings, sources. is required 9_ to gain access to this menu. 1. Press MENU button and then use A / Y button to select Lock menu. Then, pressl_ button. The TV is set up with the initial password security default password is 9-4-4-3. "0-0-0-0" and Video I Enter Password [ /q× :_) Audio .... _2>Channel @_ Function 2.
Operation Lock Menu Lock setup Asymbot While "C_" "_'' will be displayedforeachsub-rating. is selected, press ENTER button to go toasub rating. To select a different Rating, and then repeat the process. :_I_'_L_ Channel The V-chip will automatically that are "More restrictive" sub-rating inTV-PG, TV-14 and TV-MAwill block certain categories .
Operation Other Functions Brief Info Brief Info shows the present screen information. Press DISPLAYbutton to show the Brief Infoon Press DISPLAYbutton or EXIT button to exit. the screen. Function" [] Show the present screen information. [] Press DISPLAYbutton or EXIT button to exit.
Operation Other Quick Functions program view 18 Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. 1. Suppose the channel numberyou used just now is 8 and the channel number you are using is 18 (as shown in the figure). 2. If you want to return to the last watched you can simply press RECALL button. program channel 3. If you want to return to channel 18, press the button again.
Operation USB Input 1.Supporting media andfile format: Digitalpictures (.JPG) and digitalmusic (.MP3)fites Due to differences in the file code and file mode, It is possible that some files cannot be read. 2.Before starting operation, verify USB storagedevice is of FAT32 and FAT file system format. At present, this television does notsupport NTFSand the file systems of other format. 3.External card reader supports most digital cards available in themarket.
Operation USB Input To play pictures and music together rsertUSBdrvewth nusca/dpctm-ef: es o eUSB put _s/d seect the p ctm-es to be p_wed Then setectthe Muscfodera_dc oose eMP3f es oDepayed Please note. As some files must be read while music is being played, thespeed of pictureoperation response might be affected. 1.Press _1/_, button to select Press ENTERto enter. Music I d®[. 2. Press A/Y/_l/_-button to select the desired then press ENTER button to enterto play. music, and 3.
Operation Remote Setting Control Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, DVD, VCR, SETBOX, CABLE orAUDIO. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note The remote control might not becompatibte with altDVD Remote Operation To control a deviceusing 1. Program theRemote 2.
Operation Remote Control 5. When thedevice turns ON,press and releaseENTER key to programthe remote withthe new code, saving the code andexit. To exit withoutprogramming, press anykey other except CH+/CH- and ENTER. LED will be off after manually scan mode is exit. 6. If thedevice responds, nofurther programming isrequired. If thedevice does notrespond, repeat step 1through 5.And searchingwill start fromcurrent code set. If no keywas pressed in 30seconds, manually scanmode will beautomatically exit. 7.
Operation Remote Remote Control Control Codes TV NO. Brand Code Brand Code 74 Memorex o71 074 075 084 134 75 MGA 073 074 075 080 lO5 108 76 Mitsubishi 049 073 074 075 080 lO4 lO5 77 78 Montgomery Motorola o71 075 089 lO4 112 118 1 Haier 001 2 A Mark 3 Action NO.
Operation Remote Remote Control Control Codes VCR DVD NO. NO.
Operation Remote Remote Control Control Codes SETBOX NO. Brand NO.
Operation Remote Remote Control Control Codes AUDIO Receiver/Tuner Audio System NO. Brand Code 1 2 Aiwa BOSE 017 010 3 Carver 4 5 Curtis Mathes Denon 6 7 8 NO.
Operation Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your newTV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here'sa great way to keep the dust off your screen for awhile. Weta soft cloth in a mixture of lukewarm water and a litttefabric softener ordish washing detergent. Wring the cloth until it'salmost dry, and thenuse it to wipe the screen. 2.
Specifications Product Specification HL32R1/HL26R1/HL32K1/HL26K1 HL42XR1/HL32XK1/HL42XK1 Resolution 1366X768(Dot) 1920X1080(Dot) Power requirement Stand-by Consumption Color External 120V~, less than 1W(modets- system HL26R1, HL32R1, HL26K1, HL32K1, HL32XK1) NTSC, ATSC, Color Operating 16,770,000(256 Temperature Humidity Maximum Range steps ofeach R, Gand B) 32-104°F(0~40°C) Less than 80% Range Elevation MODEL Clear QAM 75 ohm Antennalmpedance Operating 60Hz 6561 feet (2000m
Troubleshooting Troubleshooting For the sakeof the instructions time andcost, it isstrongly recommended thatyou listed hereunder before contacting the after-sales No picture, no sound Verify Verify Verify check outthe problem byyourself service for technical assistance. if the television is properly if the television is properly if electricity is available. plugged. supplied Verify if correct signals are input. Press INPUT button to change signal input to TV input.
Warranty Warranty This Haierbrand its original container, defective agrees product, when shipped in and materials, that it will, at its option, the defect or replace respect will be free from workmanship no change to the purchaser, and either repair the defective with a new or re-manufactured or otherwise. of the productor which has been damaged the exterior of all claims, negligence, of or or attempted authorized service center property in design or construction.
Haier ° 01 0090506421A
