LCD TV OWNER`S MANUAL MODEL S : L32A18-AK L32A18-A L32A18 Please READ this manual carefully before operating your TV, and retain it for future reference.
Congratulations on your purchase, and welcome to the " family " ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier " family," you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier product.
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1.
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions.
Table of Contents Warning ............................................. 1 Important Safety Instructions................2 Buttons and interface location..............5 Front control panel............................ 5 Rear control panel............................ 6 Remote controller............................... 7 Keys of remote controller..................... 8 Function introduction ....................... 8 Effective range ................................ 9 External Equipment Connections ........
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel TV/AV MENU USB1 jack VOL- USB2 jack VOL+ VIDEO CH- Video AV2 R Audio R AUDIO L CH+ 1. CH+/- : program minus and plus, menu options. 2. VOL+/-: volume decrease and increase, menu reset and entry. 3. TV/AV: all input source display. 4. MENU: menu display. 5. Remote control signal receive window. 6.
Buttons and interface location Rear Control panel Power Cord Socket This TV operates on AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. DVD/DTV Input (Component ) PC VIDEO Input Connect a component Connect the monitor video/audiodevice to output connector from these jacks. a PC to the jack Y HDMI/DVI IN1 HDMI/DVI IN2 Pb/Cb Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box.
Remote control Inserting Batteries 1 .Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two AA Aalkaline batteries in the compartment. paying attention to the polarity diagram in the battery compartment. (plus and minus poles to respective mark) 1 2 3.Replace the cover of the battery compartment.
Keys of remote control - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction TV DVD SETBOX Press the SELECT button repeatedly to select one of the system modes in which the remote control can be used. Power Off/Standby any other programmed equipment off.
Remote control Effective range -Here showns may be somewhat different from your TV, is only the graphic solution, please take material object as. above 20 20 left 45 45 right below front 8m DVD SELECT RETURN ENTER HDMI ZOOM HELP USB TV/AV ZOOM/MOVE SWAP PIP PIC.SIZE SCAN I/II Y PLA OK CH+ DIS VOL- MENU VOL+ CH- SHU EP TTLE SLE TIME.SKIP H.LOCK PSM Q.VIEW S SM STILL ~ CH.EDIT -/-- Ensure the remote control is pointed toward the remote control window on the display.
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different.
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1.
External Equipment Connections DVD connection How to connect 1 . Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the HDTV IN jacks on the TV and connect the DVD audio outputs to the HD-AUDIO jacks on the TV, as shown in the figure. Y Pb/Cb HD-AUDIO Pr/Cr IN2 2 . If your DVD only has an SCART output SCART2 SCART1 PC/DVI AUDIO IN ANT IN IN1 Y Pb/Cb Pr/Cr HD-AUDIO jack, connect this to the SCART input on the TV. as shown in the figure. How to use 1 . Turn on the DVD player, insert a DVD.
External Equipment Connections PC connection How to connect 1 . To get the best picture quality, adjust the PC graphics card to ( 1024x768),60Hz. port for video connections, depending on your PC connector. 3 . Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required. 2 . Use the TV`s PC IN How to use 1 . Turn on the PC and the TV. 2 . Use TV/AV on the remote control to select PC source. 3 . Check the image on your TV.
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 first, connect power cord correctly and the power indicator will light . 2 If the indicator is lighting, press POWER on the TV set.
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search 1 Press MENU button and then use CH+/button to select the TUNING menu. MENU 2 Press VOL+/- button and then use CH+/button to select Auto Search.
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. 1 2 Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Tuning Program. MENU PICTURE AUDIO ADJUST Tuning Program Auto Search TUNING FUNCTION 3 Press VOL+/- button to enter the submenu. TIMER 4 Press CH+/- button to select Manual Search.
Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. 1 Press MENU button and then use CH+/button to select the TUNING menu. 2 Press VOL+/- button and then use CH+/button to select Tuning Program. MENU PICTURE AUDIO 3 Press VOL+/- button to enter the submenu.
Tuning menu Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. 1 Press MENU button and then use CH+/button to select the TUNING menu. 2 Press VOL+/- button and then use CH+/button to select Tuning Program. MENU PICTURE AUDIO ADJUST 3 Press VOL+/- button to enter the submenu. Tuning Program Auto Search TUNING FUNCTION 4 Press CH+/- button to select Skip. TIMER 5 Press VOL-/+ button to set Skip as On.
Tuning menu You can watch TV program in a presetting channel. How to select the desired program 1 Using "Program number" buttons Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously with in3 seconds . 2 Using CH+/- button. Press CH+ button to select a channel number in number increasing direction. Press CH- button to select a channel number in number decreasing direction.
Picture Adjustment The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. picture modes The picture mode provides the pre-defined images settings. Press the P.STD button to select the option.
Sound Adjustment Sound modes The sound mode provides the pre-defined sound settings. Press the S.STD button to select the option.(Music/Standard/Personal/Hall) This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received. Press CH+/- button to Select Audio Mode, press VOL+/- button to select the Music Standard Personal or Hall.
Sound Adjustment Eliminate sound When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. 1 Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press VOL+ button.
Time Setting Clock setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected. 1 Press MENU button and then use CH+/button to select the TIMER menu. 2 Press VOL+ button and then press CH -/+ button to select the Clock option.
Function menu It is possible to select language, OSD transparent, Menu Timer and Calendar of the menu as follows: Function setup 1 Press MENU button and then use CH+/button to select the FUNCTION menu. 2 Press VOL+/- button and then use CH+/button to select the desired option. MENU PICTURE AUDIO 3 Press VOL+/- button to adjust the option you have selected.
Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Adjustment Setup When PC input mode is set 1 Press MENU button and then use CH+/- button to select the ADJUST menu. 2 Press VOL+/- button and then use CH+/button to select the desired option. 3 Press VOL+/- button to adjust the option you have selected.
Adjust menu In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: Adjust This is used for adjusting H Position and V Position as well as relative parameters in PC and mode. 1 Press MENU button and then use CH+/button to select the ADJUST menu. 2 Press VOL+/- button and then use CH+/button to select Adjust option. 3 Press VOL+/- button and use CH+/- button to select the desired adjust parameter option.
Lock setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock setup Press H.LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the LOCK menu will be displayed. If the password is not correctly entered, you will be required to reenter the password and the cursor will remain onscreen. Press EXIT to exit the window.
Lock setup Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV, Scart and PC. Press CH+/- button to select the option, and press VOL+/- button to display Source Lock menu. Press CH+/- button to select desired option. Press VOL+/button to set up the mode of Source Lock.
Other functions NICAM If the broadcaster is transmitting Bilingual sound service. The / button on the remote controller will allow up to 2 separate languages to be selected. You can press the / button to make a choice. Display function If current program number, color system and sound system are to be displayed on the screen, press DISPLAY button, and all the related information will appear at right up corner of the screen. If the DISPLAY button is pressed again, the displayed information will disappear.
Stream media broadcast system Stream media play prepare 1. Supporting equipment 1.Equipment supporting Mass and Storage agreements include USB, mobile hard disk, card reader, some MP3 and digital camera. 2.Equipment supporting PTP agreement includes some digital camera. 2. 1 Supporting media: picture, music, MPEG4, MPEG2 and MPEG1; Supporting file format *.Avi, *.DIVX, *.MPEG,*.DAT, *.MP3, *.WMA, *.JPG and *.JPEG.
Stream media broadcast system To start the media play 1 Press the USB button on the remote to enter stream media system. AAA Multimedia Player 2 The system start up about DVD SELECT 2 seconds, and then insert USB in the card slots DEVICE COPY RETURN ENTER HDMI ZOOM HELP USB TV/AV ZOOM/MOVE SWAP PIP PIC.SIZE D IS PL AY O SH U K CH+ VOL- MENU LE S TIME .SKIP H.LO SETUP Press the Up or Down key to select the desired option. Press ENTER to enter.
Stream media broadcast system To select stream media broadcast system 1 . Press or button to select DEVICE item. (The device be inserted and identified). 2 . Press ENTER button to enter adjusted option. DVD SELECT AAA Multimedia Player DEVICE COPY SETUP Press the Up or Down key to select the desired option. Press ENTER to enter. RETURN ENTER HDMI ZOOM HELP USB TV/AV To play picture AAA Multimedia Player ZOOM/MOVE SWAP PIP PIC.
Stream media broadcast system To play Movie 1 Press or button to select Movie option. DVD SELECT 2 Press ENTER to enter playing HDMI ZOOM HELP USB TV/AV ZOOM/MOVE SWAP PIP IS AY O U VOL+ LE S TIME PSM S SM .SKIP H.LO LE E P C No Name D No Name HELP button to call up menu, at this time, you can operate the movie of playing. COPY SETUP Press the Up or Down key to select the desired volume. Press ENTER to enter. CK Q.VIEW STILL ~ CH.
Stream media broadcast system To enjoy music 1 Press or button to select Music option. 2 Press ENTER button to enter ZOOM HELP USB TV/AV Music SETUP SELECT RETURN ENTER COPY play menu. DVD HDMI AAA Multimedia Player DEVICE 3 Press Press the Right or Left key to select the desired option. Press ENTER to enter. Press RETURNback . or button to select the desired music, and then press ENTER button to the playing music interface. AAA Multimedia Player DEVICE ZOOM/MOVE SWAP PIP PIC.
Stream media broadcast system To select the Music and PIC item 1 Press or button to select Music and Pic option, and press ENTER button to enter play menu. AAA Multimedia Player DEVICE COPY DVD SELECT SETUP RETURN ENTER HDMI ZOOM HELP USB TV/AV ZOOM/MOVE SWAP PIP PIC.SIZE IS PL AY O U K CH+ VOL- SH MENU LE S TIME .SKIP H.LO Press or to select desired file(picture and music), and press ENTER button to enter play menu.
Stream media broadcast system To select text 1 Press or button to select text option, and press ENTER button to enter text menu. AAA Multimedia Player DEVICE COPY DVD SELECT 2 RETURN ENTER HDMI ZOOM HELP 3 P ress ZOOM/MOVE PIP PIC.SIZE IS PL or or or to watch the text. button SCAN I/II O U MENU S .SKIP H.LO SETUP Press the Up or Down key to select the desired volume. Press ENTER to enter.
Stream media broadcast system Copy file function 1 Press or to select Copy item. 2 Press ENTER button to enter AAA Multimedia Player DEVICE the copy menu. COPY DVD SELECT 3 Press desired item of copy. RETURN ENTER HDMI ZOOM USB PIP D IS U Copy, Paste and delete, and then press or button to select Copy, and press ENTER button to confirm. PIC.
Stream media broadcast system To select language 1 Press or to select SETUP item. AAA Multimedia Player DEVICE COPY 2 Press ENTER button to DVD SELECT enter SETUP menu. SETUP Press the Up or Down key to select the desired option. Press ENTER to enter. RETURN ENTER HDMI ZOOM HELP USB TV/AV ZOOM/MOVE SWAP PIP PIC.
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2 .
Specifications and functions L32A18/L32A18-A/L32A18-AK 1366X768(Dot) ~150-240V , 50/60Hz PAL, SECAM, NTSC Sound System D/K,I,B/G External Antenna Impedance 75 ohm 5 20% -15 Storage Temperature Storage Humidity Model Size (WxDxH) unit: mm main component Net Weight(Kg) 5% 35 80% 45 90%, non-condensing L32A18/L32A18-A/L32A18-AK 810 256 17kg 635mm
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input.
0090500952A 01
