LE19K800/LE22K800/LE24K800
TABLE OF CONTENTS Important Safety Instructions………………………………………………………………………………1 Product Introduction……………………………………………………………………………………………3 General Information………………………………………………………………………………………………3 Features……………………………………………………………………………………………………………4 Listing………………………………………………………………………………………………………………5 Installation & Connection……………………………………………………………………………………6 Panel Control Keys……………………………………………………………………………………………9 Remote Control…………………………………………………………………………………………………10 Basic Operation Instruction………………………………………………………
Important Safety Instructions Thank you to choose the LCD TV with LED backlight made by our company, a valuable product with excellent quality and multiple functions. This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All machine are strictly tested before leaving factory. But incorrect use can lead to electric shock or fire.
thing to knock, press, score the panel. Otherwise it will be harmful for the panel. The exchange cost is very high. 14)There is high voltage inside the machine but no parts which can be repaired by users themselves. In order to assure the people's safety, please don't open the case to repair it by yourself. If it is needed to repair, please contact qualified engineer to repair. 15)All cables can be connected or pull out only after power supply is turned off.
Product Introduction General Information ● High-quality LED backlight LCD screen, energy saving, environmental protection, ultra-thin, brilliant features. ● Having inter high quality speakers, which will give you purely audiovisual enjoyment and save your table place. ● Having many ideal connectors, you may directly connect your DVD, vidicon etc. its disport components of input connector let you enjoy beautiful image effect. The product can be used as a computer monitor with VGA and HDMI connectors.
Features ● interface specification: Interface VGA HDMI CVBS Input/Output S-VIDEO Input YCbCr/Ypbpr Audio Input/Output TV(RF) Earphone Specification DB-15, 75Ω 0.5~0.7Vp-p H/V:TTL Level (Support mode refer to VGA Input Mode ) Video signal: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: LPCM 48KHz, 44.1KHz, 32KHz, 24Bit, 20Bit, 16Bit 75Ω 1Vp-p (PAL/NTSC/SECAM) Y: 75Ω 1Vp-p; C: 75Ω 0.286Vp-p Y: 75Ω 1Vp-p; Cb/Cr: 75Ω 0.7Vp-p Signal mode: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i 20KΩ, 0.
Power adapter: 100-240VAC 60/50Hz TV receive system: PAL+NTSC/PAL+SECAM Volume: 3W+3W Storage channels: 199 ● Working Environment: Atmosphere pressure: 86kPa~104kPa ● Storage Environment: Atmosphere pressure: 86kPa~104kPa ● VGA input mode 18.5" Mode Resolution Refresh(Hz) S/N 1 720×400 70 VGA 2 640×480 60 800×600 60 3 SVGA 1024×768 60 4 XGA 1360×768 60 5 WXGA Note: Recommended mode: 1360×768 @60Hz Temperature: 5℃~40℃ Temperature: -20℃~55℃ 21.
Installation & Connection Antenna Connection: It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition pictures. Note: Please turn off TV power before the outdoor antenna is connected to the TV signal input port. Outdoor antenna can't be located near the high-voltage wires. Please pull out the plug of outdoor antenna to avoid thunder shock in thunder weather. USB interface CVBS, DVD Player or other machine with CVBS/S-Video.
Power Connection: Insert the power plug into the socket of the electrical source ( AC 100V-240V, 60/50Hz). Notes: 1. When connecting the power cord, be sure to turn off the machine and other equipment's power. CVBS, DVD Player or other 2. If a long time at leisure, please disconnect it from power supply. machine with YPbPr/YCbCr. 3. This TV must be connected to a three pin socket outlet for safety.
Earphone Socket: The TV speakers will be shut off when earphone is inserted into this socket.( Please adjust the volume to a suitable size, to avoid sounds excessive to affect the hearing.
5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides. Note: ● Installation method is different because of Hanging arm hardware's structure. ● Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or vehicles. Panel Control Keys 4 5 6 7 1 2 3 8 3 1. Remote Receiving Sensor. 2. Power Indicator. 3. Power switch. 4. SOURCE: Press this key to enter the menu of signal source and choose signal source. 5.
Remote Control Invalid Power Mute Numerical key Program list Smart sound Smart image Key POWER MUTE Numerical key F1 Program list SMART S SMART P Cursor key OK Cursor Key Menu Channel Volume INFO Info Time Invalid Color 16:9 Source COLOR P N AUDIO Zoom Return PLAY PAUSE STOP ROTATE Color system PREV. NEXT REV. FWD.
STOP ( ROTATE PREV. ( NEXT ( REV. ( F WD. ( ) ( ) ) ) ) ) For USB operation Remote control battery installation method: Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control battery box. Note: Appearance of the remote control may be different from this picture, please according to practicality. Precautions for use of remote control: 1. When using remote control you should point it to the remote-control inductive window.
Basic Operation Instruction Power On Plug power cord into the electrical socket, press '' '' button on the control panel, then press '' panel, or press ''POWER'' key on the remote control to turn on the TV. '' key on the control Standby Press ''Power''key on the remote control. TV will be in standby. ★Special Attention: 1. TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on. 2.
3. Press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the control panel to select what is needed to adjust in sort menu. 4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-'' on the Picture Mode Soft control panel to adjust the value or setting. 48 Contrast 5.
Option Function Description Picture Mode Contrast Select picture mode Adjust the contrast of whole picture Brightness Saturation Adjust brightness and blackness of whole picture Adjust the saturation of whole picture Hue Adjust the hue of whole picture Sharpness Adjust the sharpness of whole picture Aspect Ratio Color Temp Select picture scale Select color temperature mode of the picture Select model of 3D NR Noise Reduction "Standard", "Soft", "User," "Bright" four modes.
★Remote Control Shortcut Keys SMART S: Press SMART S key on the remote control. You can switch the function among the, "Standard", "Music", "Movie", "User" four modes. MUTE: Open or close sound. VOL+/VOL-: Add or reduce volume. Option Sound Mode Treble Function Adjust audio effect mode Adjust treble value Bass Adjust bass value Balance Adjust balance of left or right sound Auto Volume Select Auto Volume Description "Standard", "Music", Movie", "User" four modes.
Option OSD Language OSD Duration Function Select language for OSD display Adjust duration of OSD menu OSD Transparency Adjust halftone of OSD menu Blue Screen Sleep Time Recall Open or close blue screen Set sleep time of the machine Resume to setting of factory Description There are many languages to select Increasing analog value, extend duration time of OSD menu; (15, 30, 45, 60). Unit: second Increasing analog value increases halftone; Decreasing analog value decreases halftone(0-100).
Press "Right" cursor key to cancel operation and continue auto search ). All of the TV programs will be saved automatically. Manual Search Select to enter the submenu of TV. Then press ''Up/Down'' key on the remote control or ''CH+/CH-''on the control panel to select ''Manual Search ''. Then press the key of ''Right'' on the remote control to enter submenu of Manual Search. Press ''Left/Right'' key on the remote control to select channel No..
Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote control to open or close ''Skip" . Select Channels with "CH+/CH-" Key Press ''Channel'' key on the remote control or "CH+/ CH-" key on the control panel to select the channels. Select channels with the Return key you can go to the last channel when pressing the Return key. For example, if the last channel is 10 and the current channel is 20, you will go to channel 10 when pressing the Return key.
USB Signal Source Operation Please insert USB memory card into USB interface of TV, press "SOURCE" key on the remote control or control panel to select USB signal source, press "OK" key to enter. Note: ① USB function support file format with video file/sound file/graphic file/text file. For some nonstandard USB storage devices, may appear condition of unable recognize, please USB 2.0 replace the standard USB storage device.
Select to return previous menu. Press cursor key on the remote control to select photo and press "OK" key (After the photo was selected, the file lower right corner shows a red hook. you can choose photos to join playlist.). Press "PLAY" key on the remote control to play. when you choose nothing, the machine will join all the photos in the file in playlist automatically.
MUSIC The operations are similar to the "PHOTO". Please refer to "PHOTO" options. Basic Function FB: Press "Left/Right" key on the remote control to select this function, press "OK" key to fast back. Press "PLAY" key to play normally. FF: Press "Left/Right" key on the remote control to select this function, press "OK" key to fast forward. Press "PLAY" key to play normally. Select time: Press "Left/Right" key on the remote control to select this function, press "OK" key to select the time to play .
Simple Troubleshooting Factor Solution Snowflake speckle and sound noise. 1.Antenna cable connector is loose , cable is damaged. 2.Channel setting is incorrect. 3.Antenna cable type is not matching. 4.Direction or position of antenna cable is incorrect. 5.Signal is weak. 1.Check the antenna cable connector plug whether or not loose, cable whether or not perfect. 2.Refer to channel setting method, resetting again. 3.Check antenna cable type(VHF/UHF) 4.Adjust direction or position of antenna cable . 5.
Symptom Factor Solution Computer no display, and prompt no signal input, red indicator LED twinkling. Signal cable is loose or fall off. Check signal cable whether or not loose, fall off, reconnect well again. Remote control distance is short, lose control. 1.Receive window of remote continue was covered by objects. 2.The battery energy of remote control is to low. 1.Remove objects, avoiding cover the receive window of remote control. 2.Change battery. Computer display faintly. 1.