User manual

Power On

Plug power cord into the electrical socket, press '' '' button on the control panel, then press '' '' key on the control

panel, or press ''POWER'' key on the remote control to turn on the TV.

Standby

Press ''Power''key on the remote control. TV will be in standby.

★Special Attention:

1. TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.

2. TV set will automatically turn to standby when the preset time of turning off reaches.

3. If you do not use it for a long time, please turn off the power supply for the machine. Do not let the machine work in

standby state for a long time.

Signal Source Selection

Press ''SOURCE'' key either on the remote control or on the control panel. ''Input Source'' will be

displayed on the screen. Then press ''Up/Down'' key on remote control or "CH+/CH-" key on the

control panel to choose the signal source. Press ''OK'' key on the remote control or ''MENU" key on

the control panel and TV will switch the current signal source to the signal source you choose.

Menu Operation Instruction

Press ''MENU'' key on the remote control or on the control panel, then the TV will display the main menu.

1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-'' key on the control panel to select the adjustment sort

menu, which includes 4 sorts:

2. Press ''Down''key on the remote control or ''CH-'' on the control panel to enter the adjustment sort menu.

PICTURE, SOUND, OSD, TV.

Basic Operation Instruction

Input Source

AV1

AV2

S-VIDEO

YPbPr

HDMI1

HDMI2

HDMI3

USB