Owner Manual

6 49-4000207 Rev 0

ENGLISH

START DISHWASHER

Start Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay

countdown. The wash cycle will begin shortly after closing the door. The display will turn off if the door

remains open for two minutes. To activate the display, close and open the door or press any pad.

Interrupt

or Pause

To interrupt or pause a cycle, slowly open the door. Opening the door will cause the wash cycle to

pause. The dishwasher will beep every minute to remind you to close the door. To restart or resume the

cycle, press Start, and close the door within 4 seconds.

Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.

The dishwasher will drain, emit a beep sound, and the wash cycle light will turn off.

Cycle Status The indicator light on the door front will change color to indicate the wash status. During the wash

cycle, the indicator light will be blue. When the wash cycle is complete, the light will change to white.

USING THE DISHWASHER

SELECT OPTIONS

The light by the selected pad will be lit to indicate which Option has been selected.

Light Press to turn the tub light on or off.

Delay Delays the start of a wash cycle up to 8 to 12 hours depending on model. Press Delay, to select the

number of hours, then press Start one time and close door to begin countdown. The cycle will start

once allotted time has expired.

Sanitize This option raises the water temperature in the final rinse to sanitize your dishware but may increase

cycle time by 60 minutes. The cycle length will vary depending on the temperature of your inlet water.

NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during or

after the main wash portion or if the incoming water temperature is so low that adequate water

heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the Sanitized

light will not illuminate at the end of the cycle. Utilizing this option will modify the cycle to meet the

requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

Zones Selecting either the Top or Bottom Zones will target dishwashing of just one rack. This will shorten the

cycle time and conserve energy. This option should be used when dishes are placed in only one rack.

Temp This option increases the temperature to help clean heavily soiled dishes and will increase the cycle

time by 20 to 50 minutes. Option may be turned On or Off during the wash cycle. This option will also

improve dry performance on the Medium cycle.

Dry Off Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the dishwasher door to

speed drying.

Dry Normal Turns on the option for faster drying. This option may add up to 64 minutes to the cycle time. On

models with the hidden heater feature, this option boosts the temperature of the dishwasher during

the final rinse portion of the cycle then utilizes a fan to circulate air to dry the dishes. This very efficient

fan may run for an additional 90 minutes after the cycle is complete to maximize drying performance.

Fan operation will end if the door is opened during this 90 minute period.

Dry Extra This option can be selected by pressing the Dry pad twice to illuminate the Extra light. It will add

additional time to your drying option, further enhancing the dishwasher’s performance for difficult to

dry items.