Silver Sea-ox HAIER-THERMOCOOL Household Electric Water Heater User's Manual HAIER THERMOCOOL Limited 45/47, Town Planning Way, Ilupeju Industrial Estate,P.M.B 21132, Lagos, Nigeria. Tel: 01-4973474, 5554768, 7734074/5 Fax: 01-5553289, 4962076 E-mail: sales@hpz.com.ng Website: www.htcool.
Cleaning and Maintenance Pre-safe Expert Mark of HAIER-THERMOCOOL Safe Water Heaters This mark is the designation for Pre-Safe Expert of HAIER-THERMOCOOL Water Heater Company, which indicates use of the company's patented technology inside the product. It ensures you a safe bath while monitoring whether your house ground wire is live or not all the time. If this mark is lighted on, it indicates your house ground wire has come live (poor grounding and live).
Use of Remote Controller Before Usage 1. button: Power on / off the machine. In off status, clock time is displayed and can be adjusted by pressing Set button, and or button. 2.Mode button: With machined powered on, you can lightly press Mode button to shift between Real-time Heat / Warm, Medium Warm, Night Power, Time 1,Time 2,Time 1+Time 2 and Intelligent operation modes. In Medium Warm mode, default highest temperature is 40 and can't be adjusted.
Operation Instructions Features 2. Safe: High-quality imported heat-resistant stainless steel heating element, corrosion resistant and more reliable. Fuzzy control with over-temperature protection, tank liner over-pressure protection and current leakage protection. Safe Care patented design together with the function of monitoring and displaying of live ground wire has become a real safeguard for family safety. 3. Durable: Specially treated shell. Elegant and durable.
Operation Instructions Safety Precautions Check if power meter and wire size are consistent with water heater rated current. If necessary, ask experienced qualified electricians to check. The water heater shall use 230 V~ / 50 Hz power supply from a separate socket (no multi-purpose socket) and be reliably grounded. Power plug pins shall be cleaned in time to avoid any contamination causing accidents like fire.
Setting Environment Do not locate in freezing places. If ice forms, tank and pipes will break, causing scalding and leakage. Do not install it outdoors. Operation Instructions Water heater automatically sets an energy saving temperature between 35 - 40 according to the difference between water temperature and ambient temperature (normally this medium temperature can ensure small demand but not shower.
Operation Instructions Dimensions HEATING (Fig.1) Front View Bottom View a1 A B d1 I b1 2. Temperature Setting With the machine powered on (with no any digits flashing on the display), press or button to enter temperature setting status with the temperature digits rapidly flashing. Temperature can be changed between 35 - 75 with an increment 1 . In real-time heating mode, you can directly press or button to adjust temperature setting value.
Control Panel Illustration Installation Installation must be made by installers of or designated by our company after-service department. The water heatershall be wall-mounted. Before installation, make sure water heater rear wires are fit firmly. Determine an installation location. Make four holes 12mm, 65 mm deep in the wall with an impact drill as shown in Fig. 2. Insert and fixexpansion hooks and expansion bolts in corresponding wall holes. Lift the water heater.
