HD Ready Digital LCD TV and HD Ready Digital LCD TV/DVD Combi USER'S MANUAL Please read this manual carefully before using your television and keep this manual for future reference.
CONTENT Safety Notice .........................................................................................1 Front Panel Control................................................................................ 2 Connection ........................................................................................... 3 Remote Control ..................................................................................... 4-5 Remote Control ........................................................................
Safety Notice To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television.
Front Panel Controls Other inch SOURCE MENU 2 15 inch 3 SOURCE MENU VOL- VOL+ CH- 4 VOL- CH+ 5 VOL+ 12W CH- STANDBY 1 CH+ POWER 11W 6 7 6 7 T1 (The figure above and the description of the button may be different, just see the actual set.) Control Panel Funct i on 1. Standby switch 2.SOURCE Select the input signals: PC/COMPONENT/DVD/HDMI/DTV TV/SCART/S-VIDEO 3. MENU Press to select the main menu 4.
Connection Options DVD STOP PLAY/PAUSE OPEN/CLOSE ANT IN AUDIO IN Pr Pb Y PREV NEXT S-VIDEO DVD insert TV SCART VGA IN HDMI (Please refer to actual product of the DVD slot) COMPONENT Input Connect a component video/audio VGA /COMPONENT/ device to these jacks S-VIDEO Audio Input Connect the PC output connector from a PC to the audio input port ANT IN AUDIO IN Pr Earphone port Antenna Input Connect cable or antenna signals to the TV, either directly or through your cable box.
Remote Control Key Functions(for TV/DVD Combi) When using the remote control, aim it towards the remote sensor on the TV P.STD STANDBY OPEN/CLOSE 10+ SCAN SWAP MUTE CALL 1 2 3 5 6 7 4 8 SOURCE 9 0 -/-- NICAM DTV/DVD P+ V- V+ MENU ZOOM AUDIO PSTOP REV SETUP PAUSE/STEP TUNE FWD PREV D.MENU EXIT NEXT PROGRAM EPG SUBTITLE PLAY/ENTER OK TITLE/PBC SEARCH ANGLE FAV i A-B SLOW D.
Remote Control Key Functions(for TV/DTV only) When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By SLEEP STANDBY Q.VIEW NICAM DISPLAY MUTE NICAM Sleep PC AUTO AD Switch to PC mode Return the last watched program channel 1 2 3 5 6 7 4 8 SOURCE 9 0 Automatically adjust in PC mode Call Screen Display Program Number Picture mode -/-- P.
Remote Control Key Functions Installing Batteries 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; 3.Connect a D type 15-pin VGA interface VGA IN cable ( not supplied ) to the VGA video interface connector on the PC.
Connection Instructions COMPONENT (If connected to S-VIDEO,select the S-VIDEO external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.
Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Press SOURCE to select SCART mode. 3. Press Play button on external equipment and it should appear on the screen. SCART External equipment HDMI Input HDMI TV HDMI Devices Connect the cable from the HDMI devices to the TV HDMI, as shown in the figure. How to use 1. Select the HDMI source by using the SOURCE button on the remote control. 2.
Basic Operating Instructions Turn on the LCD-TV P.STD STANDBY When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red.
Basic Operating Instructions Select the TV Channel You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the -/-- button until - is indicated on the screen and then press the relevant key on the remote control. for example: if you want to choose channel 8, just press the Key number 8. 2.
Menu Operations 1. Press MENU button to display the main menu, and V+/V- to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the EXIT button to exit the menu Picture Menu Options Picture quality can be adjusted for any input separately . The picture quality on the screen can be adjusted as follows: 1. Press MENU button and V+/V- until the following menu appears on the screen. 2.
Menu Operations Picture Menu Options Continued 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Functions: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : The image becomes higher as the number increase.
Menu Operations Audio Menu Options Continued 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved . Functions : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right .
Menu Operations Function Menu Options 1. Press MENU button and V+/V- until the following menu appears on the screen. FUNCTION INPUT SOURCE TV LANGUAGE ENGLISH TXT LANGUAGE PAN EUROPEAN TXT EAST/WEST EAST BLUE SCREEN ON DISPLAY MODE 4:3 RESET HOTEL LOCK Only available for special series Only available for some countries 2. Press P+/P- button to enter the function menu and to go up and down to select the desired option . 3.
Menu Operations Function Menu Options Continued LOCK SET PASSWORD TUNER LOCK PROG. SET PROG. NUM SOURCE LOCK CHILD LOCK MAX VOLUME VOL. SET INITIAL VOLUME CLEAR LOCK OFF TV 4 OFF 50 OFF 50 PASSWORD: The password can be changed. Press P+/- to select PASSWORD and V+ to enter. The screen will display NEW PW: ----, then enter the new password and the screen display CONFIRM PW: ----, if the same password is entered correctly twice, the password will be changed.
Menu Operations Function Menu Options Continued Press P+/- button to select desired option. Press V+/- button to set up the mode . If some source is set on, The screen will display blue background with the mute mode and Lock icon when you enter the source. In lock on mode, when screen is blank, SOURCE LOCK will be always displayed on the screen. If you want to cancel the lock of some source mode, enter SOURCE LOCK submenu and set the mode off, or activate CLEAR LOCK .
Menu Operations PHASE : Removes any horizontal distortion and clears or sharpness the displayed characters . CLOCK : Adjust the TFT-LCD to match the PC input source H.POSITION : Picture horizontal adjust V.POSITION : Picture vertical position adjust . Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING TUNING PROGRAM COUNTRY UNITED KINGDOM AUTO SEARCH Only for some countries Note: This menu only appears in TV mode . 2.
Menu Operations Tuning Menu Options Continued SOUND SYSTEM : Select the TV standard system from DK,I,L/L',BG. (L' may be not available in some countries) SKIP : If you want to skip a channel , press V+/V- to select ON , and this channel will be skip next time when you press P+/P- . But you can press digits button to select the channel . If you want to restore the channel , select OFF. AFC : Auto frequence control . Select ON to improve the image quality .
DVB-T Main Menu Operations Press the DTV/DVD button on the remote control to enter the DVB-T status. Press TEXT button to display the additional information. 1. Press D. MENU button to display the main menu 2. Press / to scroll through the options 3. Press OK button to confirm enter the submenu 4. Press the D.MENU or E XIT button to exit the menu Note:Just according the display on the menu to operate. Installation 1. Press D. MENU button , the main menu will appear.
DVB-T Main Menu Operations First Time Installation Press / button to select First Time Installation and OK button to display the password confirmation menu.( The password is 0000) and then press / button to select Yes and OK to enter the sub-menu. First Time Installation Welcome Menu Language English Country France TV Type 4:3 OK 1) Firstly select the Menu Language which will be used in all other menus by by pressing / button, then press / button to select country.
DVB-T Main Menu Operations 4. Press / button to select the channel and OK button to set . The favourite mark will appears alongside the selected channel. This mark indicates that this channel is a member of the selected list. Press OK again will remove the channel from the list. 5. Press the red colored button will remove all channels from the selected list. 6. Press DTV/RADIO button allows you to switch between TV and radio in DTV mode. 7. Press EXIT button to exit the favourite lists screen.
DVB-T Main Menu Operations Lock: Press the / button to select the channel, and then press the / button select the Lock. Press the OK button to set lock. The lock indicator appears alongside the highlighted channel, then this channel is locked. Repeat the operation to remove the lock. The indicator will disappear.(default lock key 0000) Favourite: Press the / button to select the Favourite,and then press the OK button to enter the Favourite List menu. You can set the Favourite channel list.
DVB-T Main Menu Operations Timers When setting a timer the pin code must be supplied to a parental controlled service. So that the timer can override any parental control when is triggers. A timer could be triggered in standby or viewing mode. the receiver is locked during a timer is running. You can unlock the receiver by pressing the TIMER button then the EXIT button, then the timer is cancelled. When a timer is triggered whilst in standby mode the service for which the timer was set will be selected.
DVB-T Main Menu Operations Settings The Settings menu includes several sub menus: Configuration, Parental Control, Time Settings, Upgrade and System Information. Settings Configuration Parental Control Time Settings System Information OK EXIT Configuration In the configuration menu you may select the Menu/Subtitle/Audio Language. Set the TV Type and enable/disable the subtitle display. 1) Menu Language: the language used in the menu. It could be selected from the pre-defined list by the / button.
DVB-T Main Menu Operations - Menu Lock: Press / button to select ON or OFF. Access the Main Menu and all sub-menus will require the correct lock key input when this item is set to ON. - Channel Lock: Press / button to select ON or OFF. ON means that the lock key is required to view the locked channels(defined in the Channel Edit menu) while OFF is not. - Maturity Level: Press / button to select the age from the list of Off,3....
TELETEXT Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.
TELETEXT Teletext Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number. Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read.
Basic Playback Basic Playback Preparations Press the DTV/DVD button on the remote control to enter the DVD status. Note: The unit do not allow enter DVD mode(or place a DVD in the disc slot) again after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again. Basic playback Data Side When pressing the D.CALL button repeatedly different OSD indicator will be displayed for different types of disc DVD, CD etc Stop playback 1.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT. SUBTITLE Press " SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the ordinal number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc). This function can select up to 32 languages displayed on screen.
Special Function Playback JPEG DISC PLAYBACK Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the PLAY/ENTER button. Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
DVD System Setup DVD System Setup General Setup Process SETUP 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/or b item, then press submenu. to select, the to enter the or bu to select then 3.Press CH+/press PLAY/ENTER to confirm. 4.Press SETUP repeatedly to exit the set-up menus. PLAY/ENTER ..General Setup Page.. . Tv Display 4:3 LB 4 3/Ps . Angle Mark On 4 3/Lb Osd Lang ENG 16 9 Caption On Screen Saver Off ..Preference Page..
DVD System Setup(Continued) DVD System Setup General Setup Page Angle Mark: Users can select a particular camera angle .when playing a DVD which offers multiple angles. This item allows you to set Angle Mark ON or OFF. ..General Setup Page.. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On On Off ..General Setup Page.. On Screen Display (OSD) Language: Users can select on-screen display language.
DVD System Setup(Continued) DVD System Setup Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. SETUP PLAY/ENTER TV Type: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Usually please set to MULTI. Parental: The parental control function works in conjunction with the different censorship classes assigned to DVDs.
DVD System Setup(Continued) DVD System Setup SETUP PLAY/ENTER Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. ..Preference Page.. TV Type Parental Password Default Auto Reset Note: Some functions may not be available depending on the type of disc.
Playable Discs The following discs can be played: Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA. You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable.
Dics Protection and DVD Characteristics Compare DVD disc with other discs: DVD Encode method LD Digital/MPEG Analog Singleside doublelayer 9.4G Doubleside doublelayer 17G 133 242 266 Playing Time minutes minutes minutes 484 minutes Capacity Disc diameter Singleside singlelayer 4.7G Double -side single -layer 8.
Troubleshooting Guide To assist in location possible faults use help guide below . Troubleshooting No picture, no sound Verify if the television is properly plugged in. Verify if the television has a proper supplied power source. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television if power supply is interrupted. No sound Press MUTE button and verify if Mute mode is set.
Specifications Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model L15T11W-A,L15TA11W, L15T11W-C, L15TC11W, L15T12W-A,L15TA12W, L15T12W-C, L15TC12W, LT15T1W ,LT15T1BW, LT15T1WW Picture, sound system 1.5W+1.
English