LED TV RECEIVER USER MANUAL MODEL: LE46D10F Please read this manual carefully before using your television and keep this manual in a good place for future reference.
Contents Contents Caution Safety Information 1 2-3 Accessories Technical Specification 4 4 Product Introduction Front View Rear View 5 5 5 Connections 6 Remote Control 7-8 Basic Operation 9 OSD Menu 1. CHANNEL menu 2. PICTURE menu 3. SOUND menu 4. TIME menu 5.
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety information Safety information Safety information Mains supply This television is designed to operate from a 100-240 Volts 50Hz AC mains supply. Other power sources may damage it. Check that the rating plate states 100-240V AC before you plug it in for the first time. The manufacturer accepts NO liability for damage or injury caused by using the product with the wrong mains voltage. Mains plug We have fitted this television with a standard mains plug.
Safety information Safety information Batteries Remove batteries when the television is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive leakage, invalidating the guarantee. To protect the environment, use local recycling facilities for battery disposal. Protect the mains lead. You must ensure the mains lead cannot be walked on, crushed, chafed, cut, trapped.
Accessories & Technical Specification Accessories SOURCE V 1 2 3 4 5 6 7 8 AUTO 0 PICTURE SOUND 9 SLEEP DISPLAY CH+ VOL+ MUTE CH- VOLEXIT MENU OK INDEX SIZE REVEAL ROOT REPEAT A-B GOTO FAV FAV- FAV+ ASPECT TV/TXT User’s Manual NICAM HOLD SUBPAGE Remote control Batteries Converter cable for YPBPR video Technical Specification - TV System PAL BG/DK/I SECAM BG/DK - Screen Size 46 inch (diagonal) - Resolution 1920 x 1080 - Aerial input - Audio output power 2x8W
Product Introduction Product Introduction Front View Display the input source menu. Display/exit the OSD menu. CH Scan through channels. VOL Adjust the volume. VOL CH Turn on/standby the TV set. LED indicator Remote Control window(keep clear) (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED indicator: Press to turn on and off.
Connections USB USB:Connect to USB device for multimedia COAXIAL Connections COAXIAL: Output to audio amplifier PC AUDIO VIDEO R-AUDIO-L 1 mini mini YPbPr2 AV2 ANT IN Headphone:Connect Headphone HDMI1 IN ANT IN: Connect to antenna or cable source. Mini AV 2: Connect to the Video & Audio output on external devices with the converter cable. (Audio outputs are shared with YPbPr 2) Mini YPbPr 2: Connect to the YPbPr output on external devices with the converter cable.
Remote Control Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote control may not work correctly if it is operated out of range or out of angle. SOURCE V 1 2 3 4 5 6 7 8 9 AUTO 0 PICTURE SOUND SLEEP POWER : Turn on/standby the TV SOURCE : Source select. 0-9,: Choose channel : Go to program you latest program AUTO : Auto adjust in the PC mode.
Remote Control Remote Control SOURCE V 1 2 3 4 5 6 7 8 9 AUTO 0 PICTURE SOUND SLEEP DISPLAY TV/TXT : Teletext on/off HOLD: Hold or carry on the current subpage CH+ VOL+ MUTE INDEX: Direct recall of page 100 NICAM: Select NICAM mode. CH- VOL- SUBPAGE: Go to subpage SIZE: Press to see top half of page double size, Press again to see the EXIT MENU bottom half of page double size. Press again for normal size. REVEAL: Reveal any hidden text, for example-quiz answer.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with the power cord. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press SOURCE button on the TV set or remote control to display input source menu, and use button on the TV set or button on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu OSD Menu 1. CHANNEL menu See [Basic Operation] for using the menu system. Auto Tuning Press OK button to start Auto Tuning. You could press MENU/EXIT button to exit the process of tuning, there will be a hint on the screen, and you should press < button to confirm, or press > button to cancel the operation. ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu. Current CH: Select a Channel for storing the programme.
OSD Menu OSD Menu Programme Edit Press OK button to enter the Program Edit menu. Delete: Highlight a channel and press the RED button, a red X will appear on the right of the program edit menu next to the channel you have chosen, then press RED button again, the program will be deleted. However if you decide not to continue to delete press the menu button to quit. Rename: Select an analogue TV channel and press the GREEN button to change the name buttons.
OSD Menu OSD Menu 2. PICTURE menu See [Basic Operation] for using the menu system. Picture Mode: Choose from Dynamic,Standard,Mild and User, Set this to your preference using the<>buttons. Press OK to memorise. Note: Contrast, Brightness, Color and sharpness can be adjusted in the User mode only. They are set in the same way as picture mode. Contrast: Controls the difference between the brightest and darkest regions of the picture. Brightness: Controls the overall brightness of the picture.
OSD Menu OSD Menu 3. SOUND menu See [Basic Operation] for using the menu system. Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User. Set this to your prefered setting. Treble(Could be adjusted when the sound mode is User): Controls the relative intensity of higher pitched sounds. Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of lower pitched sounds.
OSD Menu OSD Menu 4. TIME menu See [Basic Operation] for using the menu system. Clock: Use the and buttons to select the clock icon, then use the and buttons to Select a sub menu setting the use buttons to change the setting,press EXIT to quit the menu. Note: The time is set from the DTV signal automatically and cannot be set manually.
OSD Menu OSD Menu 5. OPTION menu See [Basic Operation] for using the menu system. OSD Language: Allows you to select menu language. TT Language: Seclet the Teletext language. Aspect Ratio: Choose from 4:3, 16:9, Zoom1, Zoom2 and Panorama. Blue Screen: Turn on/off the blue screen function when there’s no signal. Key Lock: Turn on the function, and the buttons on the TV will be invalid. Hotel Mode: See next page. Reset: Press OK button to restore factory default.
OSD Menu OSD Menu Hotel Mode (You have to enter the code 1001 to enter the Hotel menu as below) Hotel Mode: Turn on/off the Hotel Mode. Source Lock: Enable the input source you turn on. Default Source: Select the input source, and the TV will play the programs in the source you select when it is turned on. Default Prog.: Select the Start Channel Number, and the TV will program the channel you select when it is turned on. Max Volume: Set the max volume value for the TV.
Multimedia Operation Multimedia Operation Basic Operation 1). Press the SOURCE button on the remote control to display the input source menu, select Media using the / / buttons, and press OK to enter the Multimedia menu seen below. 2). Insert USB device, you will see the name of the device displayed on the screen. USB device list MAIN MENU PHOTO MUSIC MOVIE TEXT 3). Press / button to select the kind of the files you want to display from a choice of PHOTO, MUSIC, MOVIE or TEXT.
Multimedia Operation Multimedia Operation 1. Photo Play the photo Press / button to select an option on the menu, and press OK button to select it. Pause: Play/pause the photo view. Prev./Next: View the previous/next photo. Stop: Stop the photo view. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Music: Play/Pause the music.
Multimedia Operation Multimedia Operation ĥ Ĥ 3. Movie Play the movie Press / button to select the option on the menu, and press OK button to change. Pause: Play/pause the music. FB/FF: Fast backward/fast forward. Prev./Next: Play the previous/next file. Stop: Stop the music. Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None. Set A-B: Select and play the preferable part of the file by setting A and B at the beginning and end. Press OK button to cancel.
Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordance with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control.
