LCD TV RECEIVER USER'S MANUAL Please read this manual carefully before using your television and keep this manual In a good place for future reference.
To users: Thank you for using our LCD-TV. Before connecting the LCD-TV and turning the power on, please read this book carefully. CONTENT Safety Notice Items................................................................................... 1 Front Panel Controls..................................................................................2 Connection Options................................................................................... 3 Remote Control Key Functions................................
Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine.
Front Panel Controls SOURCE T1 Control Panel Function 1. Power supply switch 2.TV/AV Select the input signals: TV/AV/S-VIDEO/PC/COMPONENT 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. CH- TV channel down / to select the item in the menu CH+ TV channel up / to select the item in the menu 6.
Connection Options ANT IN PC AUDIO IN AUDIO IN R L V VIDEO IN S-VIDEO Pr Pb COMPONENT IN Y VGA IN The figure is just for reference, please see the real.
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By MUTE Display current input signal information SLEEP DISPLAY MUTE POWER TV channel number select Set time to change the TV into the NICAM PC AUTO AD TV/AV standby status after a period of preset time.
Remote Control Installing Batteries 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote controller away from heat source or humid area to ensure effective performance of the remote controller.
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed.
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; VGA IN 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC.
Connection Instructions COMPONENT (If connected to SVIDEO,select the SV external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Y Pb Pr S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.
Connection Instructions Cable TV Input - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel on cable box. 3.
Basic Operating Instructions Turn on the LCD-TV SLEEP DISPLAY MUTE POWER NICAM PC AUTO AD TV/AV PSM When the POWER button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER button, the LCD-TVwill go into standby mode and the indicator light turns red. .SSM OK Q.VIEW Note: The display of the input mode will disappear in about 8 seconds.
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8.
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to help you with the TV operation. Press TV/AV to select the input source, and the menu in the different source is different . 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4.
Menu Operations Picture Menu Options continued 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : Adjust the contrast of the picture .
Menu Operations Audio Menu Options continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from left to right .
Menu Operations Function Menu Options 1. Press MENU button and V+/V- until the following menu appears on the screen. FUNCTION INPUT SOURCE TV LANGUAGE ENGLISH TXT LANGUAGE PAN EUROPEAN TXT EAST/WEST EAST BLUE SCREEN ON DISPLAY MODE 4:3 RESET CHILD LOCK 2. Press P+/P- button to enter the function menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4.
Menu Operations if buttons on the television are pressed, the screen will display CHILD LOCK. The child lock mode can be resumed by entering lock set menu, set child lock on. Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC. PHASE CLOCK H. POSITION V. POSITION 50 50 50 50 Note: This menu only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option 3.
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen TUNING TUNING PROGRAM AUTO SEARCH Note: This menu only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved .. Functions: 1.
Menu Operations Tuning Menu Options Continued SKIP : If you want skip a channel , press V+/V- to select ON , and this channel will be skip next time when you press P+/P- . But you can press digits button to select the channel . If you want to restore the channel , select OFF. AFC : Auto frequence control . Select ON to improve the image quality . FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/Vbutton to adjust and improve the image quality .
TELETEXT Some menu related function are not available in TELETEXT mode. MENU and AUTO AD control functions are not available in TELETEXT mode. If the TV is switched on by POWER after off in TELETEXT mode, or press TV/AV or PC button, the TELETEXT mode will disappear automatically. SLEEP DISPLAY MUTE POWER NICAM PC AUTO AD TV/AV PSM .SSM OK Q.VIEW Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext.
TELETEXT SUBCODE Button When Teletext information exceeds more than one page , it may take some time for the automatic changing of the sub pages to reach the sub page you require . It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found . Select the required page number using buttons 0-9 . If the top of the page indicates that sub pages are being transmitted yet the page does not change .
Troubleshooting Guide To assist in location possible faults use help guide below. Troubleshooting No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/AV button to change signal input to TV input. Restart the television of power supply is interrupted. No sound Press MUTE button and verify if Mute mode is set.
Specifications Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model Picture, sound system WL19T1 PAL/SECAM-B/G,I,D/K,L,L Audio output External input port Power requirements Power consumption Temperature WL22T1 1.5W+1.
V0.
