Fuzzy Computerized Automatic Washing Machine This manual is for XQB55-10H Special number:0030506875 Please read this manual carefully before using. Retain it for future reference.
Contents Names of the parts................................................................................................1 Safety precautions ............................................................................................. 2 Installation and adjustment ...................................................................................4 Preparation before washing .................................................................................8 Put in the laundries ............................
Before Before Using Using Names of the par ts Top lid A Top lid B Detergent box Filter cover Sop mat Water valve Cabinet handle Drain hose Control panel Inner tub Power line Pulsator Control panel film Cabinet back cover base frame Adjustable foot fixed foot (3) Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users.
Safety precautions Please plug the plug on special 220V /10A receptacle.Be sure to use single-phase three pins receptacle.Ensurethe earthing prong of the power receptacle is earthed reliably.Use leakage protector if possible. Before Before Using Using The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.
Safety precautions Before Before Using Using Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.Do not let the children climb the washing machine. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.
Before Before Using Using Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter 1.Press downward to assmble. 2.Pull upward to detach. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth,blanket, etc. ).
Before Before Using Using How to change the direction of the drain hose 1.Loosen the fastening screw of the back cover to take off the back cover. Be careful not to do it by force to prevent breaking the claw of the back cover.(as indicated in Figure 1) Back cover 3.Extend the drain hose from the installation hole at the right side of the base frame. Fix the drain hose onto the base frame with the drain hose frame and fasten the screw.
Before Before Using Using Install the water inlet hose Confirm the water tap Water tap,suitable Water tap,not suitable Outlet end surface >10mm It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water tap 1.Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused. 2.
Before Before Using Using Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to Water absorption cushion confirm if it's suitable.
Preparation before washing Using process Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if there's special requirment for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc.
Put in the laundries Using process The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.5kg. The thickness, size, type of the cloth will influence the actual washing capacity.
Use the operation buttons Using process a. Description of the function of the buttons "PROCEDURE"button With it you can select one or several processes of soak, wash, rinse and spin. STANDARD JEANS GENTLE QUICK WASH WATER LEVEL SELECTION " WATER LEVEL"button PROGRAM SELECTION After washing for 1 min, pressing "Water level" button will enable supplemental water filling, which will stop automatically upon the water reaching overflow level.
"START/PAUSE"button SURPLUS(MIN) To indicate -- during sensing. To indicate remaining min. During program running. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 16) Page 16 After the power is switched on, press it to start the machine During working, push it to pause working. During pause, push this button to restart and continue operation. "POWER ON/OFF"button Press "Power On/Off" button to connect power supply.
Using process b. Operating procedure and explanations for the buttons WATER LEVEL SELECTION PROGRAM SELECTION SOAK WASH RINSE SPIN PROCEDURE SELECTION RESERVE HOURS LATER STANDARD JEANS GENTLE QUICK WASH SURPLUS MIN RESERVATION CALEFACTION START PAUSE POWER ON/OFF 1 Press the "POWER ON/OFF" button to switch on the power supply After switching on, the washing machine heating function will be automatically set inactive.
Using process 3 Press the button of "PROCEDURE SELECTION" to select suitable processes. PROCEDURE SELECTION After the power is switched on, the washing machine will automatically set a normal program comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the paragraph "Processes selecting".
Using process 4 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL SELECTION After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 5 Push the " RESERVATION/CALEFACTION" button to select suitable reserve program RESERVATION CALEFACTION After switching on, the washing machine reserved wash program will be automatically set i nactive.
Disposal after washing Using process After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) Figure 1 2.
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena Buzzing upon reservation starts, Nixie tube indicates "E0" No or slow drain, nixie tube indicates "E1" , buzzing.
Packing list Name User's manual Quantity Storage position One Inside the document bag One Inside the accessory bag Components of the water inlet hose Lint filter One Inside the document bag Bottom plate One Between the upper cushion of the washing machine package and the upper seal of the package carton Tapping screws Five Automatic washing machine Inside the document bag One Specification Water level/Water quantity (about) Water inlet pressure 0.03MPa-0.