User Manual

2.5 Install back panel
1
、
Remove battery cover
2
、
Connect data line of the front and back
panel
3
、
Fix the back panel with 3 fixing screws.
4、
Make adjustment if necessary, fasten the
screws
2.6 Install batteries
1
、
Put 4 AA batteries into the battery case
and pay attention to the directions.
2
、
Close the battery case and fix it with
screws.
3、
Installation finished.
2.7 Test after installation
1
、
The door can be opened when turn on the
back plate handle.
2
、
Input initial master code “123456” “#” on
front panel to open it.
2.8 Usage of emergency mechanical key
1、 Remove key hole cover with plastic sucker
or magnet
2、 Insert the mechanical key, turn 90
degrees.
3、
Turn on the handle, door opened.
3