HAIFUAN HFAM10B-L-NB Bluetooth User Manual
Technical Parameters Product Type HFAM10B-L-NB Dimensions 8.27”*2.76”*4.53”(210*70*115MM) Communication Methods Bluetooth 5.0 BLE Supporting systems Android 4.3/ISO7.0 above Working Temperature -20~60 Celsius (-4~140 Fahrenheit) Material Zinc Alloy Weight 5.5LBS (2.5KG) Operating Voltage 4* 1.5V“AA”Alkaline Batteries Low Battery Voltage 4.
Part 2: Installation Instructions 2.1 Drilling holes 1、 Drill holes according to the drilling template 2、 Drill holes on the door frame to install strike plate 2.2 Install latch and strike plate 1、 Fix latch on the door broadside with two screws 2、 Fix the plastic case and strike plate on the door frame with two screws 2.
2.4 Install front panel 1、 Place water proof rubber under front panel, Install front panel, pull the connect data line through the hole 2.5 Install back inner plate 1、 Place water proof rubber under back inner plate, Fix 3 screws 2、 Connect data line of the front and back panel, get the extra line into door hole or fix it around the spindle(do not impact the movement of spindle) 3、 Install batteries 4、 Make adjustment if necessary, fasten the screws 2.
System Operation 3.1 Outline Admin code: default admin code: 123456 User Capacity: 200 cards(13.56Mhz mifare card), 150 code users(4-9 digits), unlimited app users The lock can be operated on keypad or by app via bluetooth, if gateway is installed(the gateway is not included in the lock package, require additional purchase), it can be operated remotely(check 4.3 for details ) 3.2 System Initialization Default admin code is “123456”.
4.2 Login in TTLOCK(Turn Bluetooth On) 4.2.1 Register app This app support more than 200 countries. Can be registered by phone number or email. 4.2.2 Connect lock with app(Turn Bluetooth on) Step:1 click on the left up corner button to show the page on step 2 Step:2 click on add locks Step:3 click on door locks Step:4 click on next Step:5 touch the keypad to wake up the lock. If the “+” doesn’t appear, input *83#→master code# (check 5.
4.2.3 Unlock by app Tap on the lock just added, tap the lock button to unlock (make sure the Bluetooth is turned on) 4.2.4 4.2.5 4.2.8 4.2.9 4.2.4 Send ekey We can send timed, permanent, one-time, or cyclic ekey to others, The recipient should also registered this app, when the ekey is sent, The recipient will be able to login in the app to unlock the device. 4.2.6 4.2.10 4.2.
4.2.5 Generate Passcode We can generate varies types of codes, such as permanent, timed, one-time ,Erase, customized, Or cyclic codes, and we can also send the code to others by wechat, SMS,Email, Messager,or Whatsapp 4.2.6 Manage Ekeys, All ekey information is shown on this page, we can clear ekey, reset it, and send ekey to others on this page 4.2.
4.2.8Manage IC Cards All card information is shown on this page, We can clear card, add card, or upload Card information on this page(such as we program a Card on keypad, then upload it to app, check 5.3 for details The upload function is only effective when the Lock already connect with the app, and codes generated on keypad is later than the connection) 4.2.9 Records All the unlock information are recorded on this page 4.2.
4.3 Install Gateway for remote control (An extra gateway is required for this step, after installation, the lock can be operated in a long distance where Wifi or 4G is available, and it will be able to work with alexa, check 4.
Step8 Step8 4.
Step1 Step2 Step5 Step6 Step9 Step3 Step7 Step10 Step4 Step8 Step11
5. Operation On Keypad 5.1 change admin code user via keypad Input *12#→ original master code(123456) #→new master code(4-9 digits) #→new master code again# *12# Original master New Master code(4-9 New Master Code code(123456) +# digits) +# again+# 5.2 add users codes via keypad Input *85#→new master code#→user code(4-9 digits)#→user code(4-9 digits)# *85# New master code +# user code(4-9 digits) User Code again+# +# 5.
5.7 add app user Input *83#→new master code#→login in app to add this device(check 4.2.1) *83# New master code +# Login app to add this device (Note: all the codes and cards added before connection with app will be deleted except for admin code, you can add new codes or cards on app now. Or you can still add users via keypad, they are able to uploaded to app now) 6 Others This lock has anti-peeking function, with which users can input innocent number before or after the password, e.g.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.