User's Manual

5.7 add app user
Input *83#→new master code#→login in app to add this device(check 4.2.1)
(Note: all the codes and cards added before connection with app will be deleted except for
admin code, you can add new codes or cards on app now. Or you can still add users via keypad,
they are able to uploaded to app now)
6 Others
 This lock has anti-peeking function, with which users can input innocent number before or after the
password, e.g. XXX+password+XXX. (no more than 16 digits.)
 The keypad will be locked for 5 minutes if you continuously input wrong codes for 5 times.
 Low voltage alarm function： There will alarm to remind to change the batteries upon
unlock the door when the voltage is below 4.8V.
 The Bluetooth must be turn on when upload the data operated by keypad to app
 Bluetooth effective distance: about 2 meters
 Gate way effective distance: about 16 meters diameter
 If you keep stay on the app page, you can touch any key on keypad to unlock it
 You can also add users by press the “add user button”hidden under the back panel, near
reset button, press it , input a code to add users
7 Video Instruction
Video content
link
1
Installation and programming of HFAM10B
https://youtu.be/5_HAO0arUXM
Problem shooting (Customer Service Email: [e-mail])
If you failed to program this lock or you have any other question, please contact customer service email,
we will reply within 24 hours normally.
*83#
New master code +#
Login app to add
this device