User's Manual
Table Of Contents
2.4 Install front panel
1、 Place water proof rubber under front
panel, Install front panel, pull the
connect data line through the hole
2.5 Install back inner plate
1、 Place water proof rubber under back
inner plate, Fix 3 screws
2、 Connect data line of the front and
back panel, get the extra line into door
hole or fix it around the spindle(do not
impact the movement of spindle)
3、 Install batteries
4、 Make adjustment if necessary, fasten
the screws
2.6 Install back panel and test after installation
1、 Fix 2 screws
2、 Installation finished
3、 Test back handle to open the lock.
4、 Input initial master code “123456” “#”
on front panel to open it. (if this code
doesn’t work, press the reset
button(under the back panel) for 6
seconds , then input 000 # to reset it,
try 123456 # again)
5、 Remove the key hole cover and test
keys