User's Manual

System Operation
3.1 Outline
Admin code: default admin code: 123456
User Capacity: 200 cards(13.56Mhz mifare card), 150 code users(4-9 digits), unlimited app users
The lock can be operated on keypad or by app via bluetooth, if gateway is installed(the gateway is not included in
the lock package, require additional purchase), it can be operated remotely(check 4.3 for details )
3.2 System Initialization
Default admin code is “123456”. We must change the default admin code to add users if you want to operate on
keypad, or you can operate on app via Bluetooth(check 4.2 for details)
Initialization：
Input “123456 #” to open the lock if the lock is in factory mode, it is very important to
make sure the lock is in factory mode when you first receive it.
4 Operation On App
4.1 Download App
Search “TTLOCK” on app store to download the software or scan the QR code bellow to download it
Press RST button for 6
seconds(reset button is hidden
under the battery case )
Input 000 # to confirm, recover to factory state,
admin code back to “123456”